Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix washer leaks or pump vibration with this pump clip ring. Secures the pump connection to prevent water leaks during wash cycles. Simple fix.
Controls water flow into your washer. Replace if you notice leaks, slow filling, or no water entering the machine. Verify fit with your model number.
Keeps your washer stable and balanced. Replace if worn, damaged, or rubber base is missing to prevent walking and sliding. Verify fit with your model.
The front legs were slightly worn and the rubber coverings were missing from the rear feet. This allowed the washer to slide easily on the tile floor. I replaced all four feet. This only required a 12 mm open end wrench. After leveling the washer, things were improved, but I also took the opportunity to replace the four shock absorbers under the drum. The shock absorbers were 5+ years old and one was showing signs of wear / damage. This required removing the front and rear panels with a... Read more
Plain washer for Samsung washing machines. Secures spider bolt assembly to inner tub. Replace if cracked, worn, or missing during spider arm repair.
Difficult job. Required the complete washer to be taken apart.. With the help of your videos and youtubes was able to get through it. Cleaned everything inside and out. Attached the flange shaft assembly to the inner stainless steel tub via the spider bolts and basically worked backwards from the disassembly. Took a long time total of about eight hours for the whole process not including the cleaning. But it saved me about $600 dollars. Read more
Replacement hose drawer tub for front-load washers. Holds hoses and supports the detergent drawer. Replace if cracked, broken, or damaged during use.
Replaces the front half of your washer's outer tub. Needed when cracked, worn through, or the door boot rim is broken. Structural housing component.
Stupid flange shaft corroded (as they seem to do) and broke. The washer continued to run with a broken part, and the drum wore a hole thru the front half of the tub so it had to be replaced too. the spider bolts broke getting them out of the flange, so new bolts. Everything went back together great, and it gave me a chance to clean 5 years of dirt, fabric softener, detergent, and other junk out of the tub and shine the drum back up again. Feels like a new washer (minus the front panel that... Read more
Secures the washer drum assembly in place. Replace if the clip ring is cracked, broken, or missing to restore proper drum support and stability.
Fix a washer that won't spin or makes jerky, noisy sounds during cycles. This drive motor assembly restores smooth drum rotation and quiet operation.
Checked All over found out what it meant got online talked to appliance parts rep n she helped me out thanks so much Read more
Fix washer won't drain or leaking water issues with this drain hose assembly. Replaces split or damaged hoses. DIY-friendly, installs in 15 minutes.
I am 68 Years old and I had this PUMP DRAIN part in place and working in around 15 minutes Read more
Leveling leg assembly for front-load and top-load washers. Installs at base corner to level machine and reduce vibration. Replace if cracked or missing.
Small bushing that the hinge pin rides in for smooth door operation. Reduces friction and maintains door alignment. Replace if cracked, worn, or missing.
Tapping screw secures internal dryer components and panels. Replace if screw is stripped, missing, or no longer holds parts firmly in place.
Replacement hose that routes water from the valve to the dispenser. Install when your original hose is cracked, leaking, kinked, or clogged with residue.
First replaced inlet valve ( was not working properly). Still got code. Then replaced board assembly, washer worked properly. Replaced hoses because of the gunk that was in the old valve. Read more
Secures hose connections in your washer to prevent leaks and maintain water flow. Replace if you notice drips or loose fittings. Verify fit with your model.
Followed your excellent easy repair videos. Made sure to clean off screws and use blue loctite for the drum rotor. Read more
Replacement pre-wash compartment cover for washers. Secures and protects the detergent dispenser pre-wash section. Needed when original is cracked or missing.
Securely holds your washer's drain hose in place during operation. Replace if the hanger is cracked, broken, or missing to prevent hose movement.