Wfg505m0bb Parts

The Hinge-Door is an OEM component specifically designed for Whirlpool gas ranges. It is the stainless steel door hinge assembly that allows smooth, controlled movement of the oven door. The hinges support the weight of the door and maintain proper alignment between the door and oven cavity.

Symptoms of bad door hinges include:

• Loose, wobbly, or sagging door that does not stay firmly in place
• Difficulty in fully opening or closing the door 
• Excessive noise or vibration from the hinges
• Pinholes, cracks, or other damage to the hinge surface

Causes of failure are typically wear over the heavy usage life of a range. Hinges may also become misaligned or damaged by accidental impact.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

This Holder ORF is a small OEM retainer that secures internal components so they stay aligned during normal use. Replacing a worn or broken holder restores proper fit and prevents rattling or part movement. What it does:

• Acts as a retainer to hold a specific internal component or assembly in place
• Prevents unwanted shifting, rattling, or misalignment during operation
• Helps maintain proper spacing and component alignment for reliable performance
• Commonly replaced when the original holder is cracked, broken, or missing

• One Holder ORF retainer (single piece)

• Disconnect power to the appliance before beginning any service
• Access may require removing panels or trim; keep fasteners organized
• Use basic hand tools; avoid force to prevent damage to surrounding parts

This main wiring harness connects the control console (LCC) to the appliance's electrical components, restoring reliable signal and power routing for controls. It replaces damaged or worn harnesses that cause intermittent or non-functioning controls. What it does:

• Routes power and control signals between the console LCC and internal components
• Restores lost or intermittent control functions caused by broken, frayed, or burned wires
• Prevents error codes or shutdowns from poor or corroded connector contacts
• Enables proper operation of buttons, displays, and control-driven features

• Disconnect power to the appliance before beginning any work to avoid electrical shock
• Handle connectors carefully; align pins and push fully to ensure secure connections
• Route harness along existing clips and channels to prevent chafing or pinching
• Inspect mating connectors and control board for damage before final assembly

This ground wire provides a safe chassis connection to restore proper grounding and reduce shock and electrical-fault risk. It replaces a frayed, corroded or missing ground lead to help keep the appliance electrically safe. What it does

• Connects the appliance chassis to the grounding system to prevent stray voltage on metal surfaces
• Restores a secure ground path if the original wire is broken, loose, or corroded
• Helps stop intermittent power faults or nuisance tripping caused by a compromised ground
• Addresses symptoms like visible wire damage, loose ground connection points, or grounding-related electrical issues

• One ground wire

• Always disconnect power (unplug or shut off the circuit breaker) before starting work
• Attach the ring/terminal ends to the designated chassis ground screw and the equipment ground point
• Route the wire away from moving parts, heating elements, and sharp edges; secure with existing clips or fasteners
• If terminal hardware is missing or damaged, replace with equivalent OEM-style fasteners and torque to specification

This mounting bracket secures appliance components and panels to keep assemblies aligned and stable, helping prevent rattles and loose parts. It's a simple replacement that restores proper fit and support where the original bracket has failed. What it does:

• Provides rigid support for internal components or exterior panels to maintain alignment
• Stops vibration and rattling caused by a broken or bent bracket
• Restores secure attachment points for screws and fasteners
• Helps prevent additional wear from loose parts moving during operation

• Always unplug the appliance or disconnect power before starting any repair
• Remove necessary access panels to reach the damaged bracket; keep track of fasteners
• Reuse original screws if undamaged; replace stripped or corroded fasteners
• If alignment issues persist after installation, recheck fit and mounting points for damage

This genuine ground screw secures appliance grounding connections to the chassis, helping maintain electrical safety and reliable grounding. It's a direct-fit fastener used where a secure ground point is required. What it does:

• Provides a secure chassis grounding point for appliance electrical safety
• Secures ground wires or grounding straps to sheet metal or grounding posts
• Helps prevent loose ground connections that can cause intermittent faults or safety risks
• Matches OEM thread and length for correct fit and electrical contact

• Use appropriate tools; avoid stripping the head or over-tightening which can damage threads or the grounding surface
• Ensure the mating surfaces are clean and free of paint or corrosion for good electrical contact
• Disconnect power to the appliance before servicing electrical grounding connections

A replacement manifold pipe that routes gas from the supply to the burner valves for safe, even fuel delivery. Restores proper gas flow so burners ignite and maintain consistent flame performance. What it does:

• Distributes gas evenly to the oven/range burner valves so each burner receives fuel.
• Helps restore reliable ignition and steady flame height when the manifold is cracked or blocked.
• Common symptom: burners fail to light, have weak or uneven flames, or multiple burners behave inconsistently.
• Important for safe operation of gas ranges and ovens—damaged manifolds can cause leaks or poor combustion.

• One manifold pipe

• Turn off gas supply and electricity before servicing; follow local codes.
• Inspect fittings and seals; replace associated gaskets or fittings if damaged.
• Check all connections for leaks with a non-corrosive leak detector after installation.

The Door Glass (stl) is an OEM replacement part for Whirlpool ranges and ovens. It serves as the window that allows you to view the interior of the oven cavity during the cooking process. This door glass is designed to withstand high temperatures and provide a clear view while maintaining safety.

Symptoms of a bad door glass include:

• Cracked, shattered, or damaged glass
• Discoloration or clouding of the glass
• Loose or poorly fitting glass in the door frame
• Leaks or heat escaping around the door glass

Causes of a bad door glass can range from thermal stress due to sudden temperature changes, impact or physical damage, improper installation, or general wear and tear over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This spark module controls ignition for the surface burners, generating high-voltage pulses to the electrodes so the gas lights when you turn a knob. Replacing a failed module restores consistent, reliable burner lighting.

• Generates and distributes ignition spark to the surface-burner electrodes
• Activates when a burner knob/switch is turned to LIGHT
• Common symptoms of failure: no spark at all burners, intermittent ignition, continuous clicking, or burners that only light with a match
• If multiple burners lose spark together, the module or its power/ground is often suspect

• Disconnect power and shut off gas before servicing
• Access the module under the cooktop or behind the control panel; label wires and transfer one at a time
• Mount securely; ensure all spark leads and ground connections are fully seated and undamaged
• Restore power and test each burner for proper ignition

The Spark Ignition Switch and Harness is an OEM part for Whirlpool gas ranges. This set includes both the ignition switch component as well as its related wiring harness. 

Causes of issues can include worn or damaged switch components failing to reliably generate sparks, cracked insulation exposing conductors to shorts, or severed wires interrupting burner ignition circuits. 

Symptoms of problems are: 

• Erratic or unreliable burner ignition 
• Difficulty lighting one or more burners
• Indicator lights not illuminating as expected
• Activation of internal range fuses or breakers

This part is also compatible with Whirlpool-built ranges under Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore brands.

This replacement griddle restores a flat cooking surface for even contact and easy cleanup on compatible ranges. It provides a sturdy, heat-resistant surface for pancakes, sandwiches, and other griddle-style cooking. What it does:

• Replaces a damaged, warped, or worn griddle surface to improve heat contact and cooking consistency
• Provides a smooth, flush cooking area for foods that need flat-surface cooking (pancakes, bacon, grilled sandwiches)
• Helps contain and direct grease toward the range's existing drip system
• Useful when the original griddle has cracks, heavy corrosion, or irreparable warping

• One replacement griddle plate

• Disconnect power to the appliance and allow all surfaces to cool completely before starting
• Follow the appliance manufacturer's service instructions; some models require removing burners or grates and securing the griddle with fasteners or alignment tabs
• Handle carefully to avoid sharp edges and to prevent damage to the griddle finish

This is the replacement drawer panel that restores the finished front appearance and proper fit of the appliance drawer. It replaces cracked, dented or worn drawer fronts for a clean, like-new look. What it does:

• Provides the finished front surface for the appliance drawer and helps the drawer align and operate smoothly
• Hides internal drawer components and protects them from everyday wear and tear
• Restores cosmetic appearance when the original panel is chipped, cracked, dented or otherwise damaged
• Helps ensure the drawer closes evenly and maintains the appliance's aesthetic

• Disconnect power to the appliance and move it to a well-lit, stable work area before beginning work
• Remove the drawer assembly per the service diagram to access and replace the panel; use proper hand tools and keep fasteners organized
• Handle edges carefully to avoid scratches or cuts; wear gloves if needed

Note: Panel only, the control must be ordered separately.

This Support is a small mounting bracket that secures and stabilizes internal components, helping restore proper alignment and reduce vibration or movement. It's a direct-fit replacement designed to return the affected area to factory positioning. What it does:

• Holds and stabilizes the designated component or assembly to prevent sagging or misalignment
• Reduces noise and vibration caused by loose or failing supports
• Restores correct spacing so doors, panels, or internal parts operate smoothly
• Helps prevent further wear caused by rubbing or improper contact

• One support bracket as shown

• Disconnect power and, if applicable, water before servicing
• Handle surrounding panels and glass carefully to avoid damage
• Installation typically requires common hand tools; follow OEM diagram for correct orientation
• Test operation after installation to ensure secure fit and proper alignment