Wfg540hoes0 Parts

This inner oven door liner replaces the damaged or warped inner panel that supports the oven door glass and helps contain heat inside the oven cavity. It restores a solid mounting surface for door glass and internal components. What it does:

• Provides the inner structural panel for the oven door and supports the door glass and insulation.
• Helps maintain proper oven heat containment to support uniform cooking.
• Prevents direct exposure of insulation and internal parts to oven cavity heat and food debris.
• Addresses symptoms like visible cracks, warping, or detached glass mounting points on the inside of the door.

• Disconnect power before starting any repair and follow manufacturer's safety instructions.
• Remove the oven door per the appliance manual to access and replace the inner liner; handle glass and sharp edges carefully.
• Keep all original screws and mounting clips; confirm screw locations during disassembly to ensure proper reassembly.
• If the door has multiple glass panels or seals, verify placement during reassembly—do not force parts into position.

This orifice controls the flow of gas to a cooktop/oven burner so the appliance lights and maintains the correct flame size. Replacing a worn or clogged orifice restores consistent burner performance. What it does:

• Regulates gas flow from the valve to the burner for proper flame height
• Helps ensure even heating across cooktop burners or oven burners
• Commonly replaced when burners fail to light, have low or uneven flames, or sputter
• Works with the burner assembly and valve to maintain safe combustion

• Turn off the appliance and shut off the gas supply before removing or installing the orifice
• Remove burner cap and orifice holder per your appliance instructions; handle small parts carefully
• Use proper fittings and thread sealant only where manufacturer specifies; do not overtighten
• If you smell gas, are unsure of the repair, or lack the proper tools.

This cable clamp secures a wiring harness to the appliance frame to prevent chafing and strain on electrical connections. It helps keep wires routed neatly and reduces the risk of abrasion-related faults. What it does:

• Holds wiring harnesses in place to prevent rubbing against sharp edges or moving parts
• Reduces strain on terminal connections and wire leads
• Helps prevent intermittent electrical problems caused by loose or misrouted wires
• Keeps routing tidy for safer, cleaner internal layouts

• One cable clamp

• Disconnect power to the appliance before beginning any repair
• Replace with the same clamp type and orientation as the original; secure without over-tightening
• Route wires so insulation is not pinched; verify clearance from moving parts
• If you see damaged insulation or frayed wires, repair those issues before reassembly

This wire harness connects the dryer's main control and related components, restoring reliable electrical paths for proper operation. Replaces a damaged or burnt harness to help resolve intermittent power, controls not responding, or no-heat/no-start symptoms. What it does:

• Routes power and signals between the main control board and components
• Replaces frayed, melted, or broken wires that cause shorts or open circuits
• Restores proper electrical connections to help eliminate intermittent faults
• Helps address symptoms like control panel failure, no start, or intermittent operation

• Disconnect power (unplug appliance or shut off breaker) before starting work
• Handle connectors carefully; match connector orientation and secure clips
• Inspect mating terminals and grounding points; replace or repair if damaged

This gas tubing is the replacement flexible line that routes fuel from the gas valve to the burner assembly, restoring a secure gas connection for safe ignition and operation. Designed to match OEM fit and function. What it does

• Carries natural or LP gas from the control valve to the burner or main manifold.
• Restores a sealed gas path when original tubing is cracked, pinched, or disconnected.
• Helps eliminate symptoms such as gas smell near the appliance, burner failing to light, or intermittent pilot/burner operation.
• Works with appliance gas systems that use a flexible tubing connection.

• One gas tubing as shown.

• Turn off the gas supply and unplug the appliance before starting any work.
• Use correct fittings and thread sealant approved for gas.
• After installation, test all connections for leaks using a soapy water solution or a gas leak detector; never use an open flame.

Color: Stainless

Color: White

Color: White

This replacement fitting secures and directs the appliance water line to the internal plumbing, restoring a proper water connection and preventing leaks. Use it when the original connector is cracked, loose, or leaking. What it does:

• Connects the external water supply tubing to the appliance's internal water system
• Provides a sealed transition point to prevent drips or steady leaks
• Replaces damaged, corroded, or worn fittings that cause low/no water flow or leaks
• Helps restore reliable water delivery for ice makers, dispensers, or inlet assemblies

• Turn off the water supply and unplug the appliance before starting work
• Depressurize the line by running the dispenser briefly after shutting off water
• Use proper tubing size and seat fittings fully; inspect O-rings or ferrules and replace if needed

This replacement wire harness routes power and signals between oven components so controls and safety devices communicate reliably. It helps restore proper electrical connections for safe, consistent operation. What it does:

• Replaces a damaged or burned harness to restore electrical continuity to controls and sensors
• Carries power and signal lines between control board, switches, and safety devices
• Addresses symptoms like intermittent power, no response from controls, or visible wiring damage
• Helps prevent shorts or arcing caused by frayed or loose connector ends

• Disconnect power before servicing to avoid shock or injury
• Inspect connectors and routing; replace if pins or insulation are damaged
• Secure harness away from heat sources and moving parts to prevent premature wear