Wfl 2060/Wfr Parts

This direct hose assembly routes water or drain flow to restore proper operation and stop leaks caused by cracked or worn tubing. Designed to replace a damaged hose and help prevent water damage and poor drainage. What it does:

• Directs water or drain flow between appliance components to maintain proper plumbing function.
• Stops leaks and reduces the chance of water pooling or unintended discharge from worn or cracked hoses.
• Common symptoms addressed: visible leaks, water under or around the appliance, slow or inconsistent draining.

• Disconnect power and shut off the water supply before starting any repairs.
• Inspect hose ends and connections for damage; replace clamps or seals if corroded or worn.
• Secure hose with appropriate clamps and route to avoid kinks or pinch points.
• After installation, restore power and water, run a short cycle, and check all connections for leaks.

This door hinge bushing sits between the hinge and pivot point to reduce friction and wear. Replacing a worn bushing restores smooth, quiet door movement and helps keep the door properly aligned over time. What it does:

• Provides a smooth, low-friction pivot surface for the hinge
• Helps maintain door alignment and consistent opening/closing feel
• Reduces squeaks, grinding, or binding from the hinge area
• Replaces cracked, flattened, or missing bushing that can make the door feel loose or stiff

• 1 door hinge bushing

• Disconnect power to the appliance before servicing
• Support the door to relieve hinge tension; hinges may be spring-loaded—control door movement
• Access the hinge per your model's service information and note the bushing's orientation
• Install the new bushing, reassemble, and test door travel and latching

This air trap assembly replaces the factory air trap that helps control air in the refrigerator water line, restoring steady water flow to the dispenser and ice system for more reliable fills and reduced sputtering. What it does:

• Creates a controlled air pocket in the water line to prevent sputtering or intermittent flow at the dispenser and ice maker.
• Helps maintain consistent water delivery so the ice maker can fill reliably.
• Reduces the chance of air-related filling issues and noisy gurgling from the water line.
• Fits into the appliance's water plumbing as a dedicated inline assembly.

• Always unplug the appliance and shut off the water supply before beginning service.
• Inspect tubing and fittings for damage; replace any brittle or cracked lines to ensure a leak-free connection.
• Use hand tools; avoid overtightening fittings which can damage the part or tubing.
• After installation, restore water and power, run several dispense/fill cycles, and check all connections for leaks.

The Lock-Electrical is an OEM part for Bosch washing machines. It serves as the latching mechanism that securely locks the washer door shut during active cycles. This locking component plays an important safety role by keeping the portal tightly closed while washing and spinning functions are underway.

Causes of a faulty lock-electrical can include wear from heavy use over time, water damage to internal electrical parts, or failed components governing the locking function.

Symptoms of a malfunctioning lock-electrical include:

• The door popping or being able to open during spinning or other active cycles
• Fault lights or failure to initiate wash cycles
• Loose, misaligned, or wobbly door latching motion
• Inability to fully secure the door in the closed position

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

Replacement bumper that cushions appliance parts and absorbs shock to prevent rubbing, rattling and surface damage. Restores proper fit and quieter operation for components that contact cabinets, doors or panels. What it does:

• Cushions contact points to reduce noise from doors, drawers or panels.
• Prevents metal-to-metal or metal-to-surface scraping that can cause wear or cosmetic damage.
• Helps components close and seat more evenly to reduce vibration and movement.
• Common symptom fixes: eliminates rattling, stops rubbing noises, and prevents chipping or scuffing where parts meet.

• One bumper.

• High-level, tool-light replacement; usually presses into or adheres to the mounting surface.
• Disconnect power or unplug the appliance before opening panels where required.
• Inspect surrounding clips/retainers and clean the mounting area for best adhesion or fit.

This genuine replacement power cord restores electrical connection to your appliance so it can safely receive power. It replaces a damaged or worn cord to help eliminate power loss and reduce electrical hazards. What it does:

• Provides the electrical connection between the appliance and your home's power supply
• Replaces frayed, cracked, or burned cord insulation and damaged plugs
• Helps stop intermittent power issues caused by a faulty cord or connector
• Restores safe, reliable power routing when the original cord is compromised

• Always disconnect power at the breaker or unplug the appliance before installing
• Follow the appliance wiring diagram and route the cord to avoid heat or pinch points
• Secure strain relief and connectors per the manufacturer's instructions

Size: 10-24 x 3/8 inch.

This distribution nozzle directs water from the dishwasher's supply to the spray arm to maintain an even spray pattern during cycles. Replacing a damaged or clogged nozzle helps restore proper spray coverage and cleaning performance. What it does:

• Directs and focuses water flow to the spray arm for consistent wash coverage.
• Prevents weak or uneven spraying that can cause poor cleaning results.
• A cracked, clogged, or worn nozzle can reduce water pressure or divert spray.
• Works as part of the dishwasher's water distribution/manifold system.

• Disconnect power and water supply before beginning any service.
• Access typically through the lower tub area after removing the lower spray arm and/or access panels.
• Inspect mating surfaces for debris and ensure the nozzle seats fully to prevent leaks.

This window frame is the replacement trim piece that surrounds and secures the door glass, restoring the door's finished appearance and helping maintain a proper seal. Use it to repair damaged or loose door trim. What it does:

• Secures and frames the door glass so the door looks and fits correctly
• Helps keep the glass properly positioned to maintain a tight fit
• Replaces cracked, warped, or cosmetically damaged trim
• Can reduce air gaps and rattling caused by a loose or broken frame

• Intended for experienced DIYers;
• Power off and disconnect the appliance before beginning any door disassembly
• Handle glass and trim carefully to avoid damage or personal injury; wear gloves and eye protection
• Use only the specific replacement frame for your model to ensure correct fit

Push-in nut that secures panels, trim, or small components to studs or shafts. Restores a firm, vibration-resistant fastener to help stop loose panels and rattling caused by a worn or missing nut. What it does:

• Secures panels, trim or small assemblies to mounting studs or shafts.
• Helps keep parts aligned and reduces vibration or rattling during operation.
• Common symptom: loose or shifting panels, audible rattling, or components that won't stay in place.
• Designed for a push-fit installation to replace worn or missing fasteners.

• Always disconnect power to the appliance before servicing.
• Push the nut fully onto a clean, undamaged stud until seated; replace damaged studs or mounting hardware.
• If needed, use pliers or a socket to press the nut on evenly—avoid deforming surrounding plastic or sheet metal.

This inner door panel restores the washer lid's interior finish and structural support, helping the lid close and seal properly. It replaces a cracked, dented, or cosmetically damaged inner door to improve appearance and function. What it does:

• Provides the interior surface and mounting points for the washer top lid assembly
• Restores proper lid alignment and helps the lid close smoothly
• Eliminates sharp edges or cosmetic damage from a cracked or dented inner door
• Helps maintain correct fit with the outer door and lid components

• One inner door panel

• Disconnect power and water supply before starting any repair
• Remove the outer lid and related fasteners to access and replace the inner panel
• Keep track of screws and clips; hand-tighten fasteners to avoid stripping

Angular magnetic sensor that detects when a door or panel is closed and tells the appliance control. Replacing a worn or failed sensor restores reliable door-sensing so cycles, lights, and safety features respond correctly. What it does:

• Detects the magnet/strike position and signals the control board that the door or panel is closed.
• Allows the control to enable or disable functions tied to door position (cycles, interior lights, locks).
• Common symptoms it can fix: appliance won't start, door-related error codes, interior light not responding, or door lock not engaging.
• Intermittent or failed sensors can cause erratic operation or prevent normal cycle starts.

• Disconnect power to the appliance before starting any repair.
• Remove and replace the sensor in the same orientation; ensure the magnet/strike aligns with the sensor for reliable operation.
• Handle the sensor and connector carefully; avoid bending contacts or pulling on wires.

Replacement oven door handle that restores a secure grip for opening and closing the oven door. Replaces cracked, broken or loose handles to help make daily use safer and more reliable. What it does:

• Provides a firm grip to open and close the oven door smoothly.
• Replaces handles that are cracked, broken, loose, or missing.
• Helps prevent further damage to door trim and reduces the risk of sudden handle failure.
• Designed for factory mounting locations for a straightforward swap.

• Disconnect power to the appliance before starting; for gas units, turn off the gas supply if applicable.
• Support the door while removing and installing the handle to prevent the door from dropping — use a helper if needed.
• Remove existing mounting screws or fasteners, position the replacement handle, then reinstall and snug hardware.

This washing machine shock absorber stabilizes the outer tub during wash and spin. Replacing a weakened damper helps control vibration and noise so the washer runs smoother and is less likely to shake, bang, or walk.

• Mounts between the tub assembly and cabinet/base to cushion movement
• Helps prevent excessive vibration, shaking, and thumping noises
• Can reduce "walking" or out-of-balance interruptions when a damper is worn
• Supports smoother, quieter spin performance

• Disconnect power and turn off water supply before servicing
• Remove the appropriate access panel(s) to reach the dampers
• Support the tub when removing mounting pins/bolts; match the original orientation
• Inspect all dampers; replace any that show wear for balanced performance

This retainer is a small mounting clip that secures internal components in place to prevent shifting and noise during operation. It restores proper alignment so panels or assemblies stay fastened and stable. What it does

• Holds a panel, trim, or internal component securely in its mounting location
• Prevents rattling, vibration noise, and loose or sagging parts
• Keeps connected parts aligned for reliable operation
• Commonly replaced when clip is cracked, broken, or missing

• One retainer clip

• Disconnect power before starting any repair
• Remove necessary panels or access covers to reach the damaged clip
• Replace the clip in the same orientation; avoid forcing parts to prevent damage
• If additional fasteners are damaged or missing, replace them as needed for a secure installation