Wfvc3300uc/26 Parts

This hose inlet is the molded connection that routes incoming water into the appliance and provides a sealed mating point for the fill hose. It restores proper water flow and helps prevent leaks at the hose connection. What it does

• Directs incoming water from the fill hose into the appliance's water system.
• Provides a sealed connection to prevent drips or leaks at the hose attachment.
• Can cause no-fill or slow-fill symptoms when cracked, clogged, or loose.
• Works with the inlet hose and nearby fittings to maintain correct water supply.

• Turn off power to the appliance and shut off the water supply before starting.
• Inspect and replace any damaged gaskets or clamps when installing this part.
• Hand-tighten fittings, then snug with appropriate tools; avoid overtightening plastic fittings.
• After installation, restore water and power, run a short cycle, and check all connections for leaks.

This cable harness routes power and control signals between the dishwasher control board and components, restoring reliable electrical connections for proper operation. Designed to replace damaged or worn wiring where connectors or insulation are compromised. What it does:

• Transfers power and control signals between the main control/module and subsystems (pumps, valves, sensors, motor)
• Replaces frayed, burned, or broken wires and damaged connector ends that cause intermittent operation or component failures
• Restores proper connector fit and wiring routing to prevent shorts and miscommunication
• Helps resolve symptoms like no power to components, intermittent function, or visible wiring damage

• Disconnect power to the appliance before starting work to avoid shock or damage
• Keep track of connector positions; take photos before removing the old harness for accurate reinstallation
• Route the new harness along the same path and secure any clips or ties to prevent pinching or contact with moving parts
• If you encounter corrosion or damaged connectors on mating parts, inspect and replace those components as needed

This inner door panel replaces a damaged or corroded dishwasher door interior to restore a clean, sealed surface and proper latch alignment. Designed to match factory fit and help prevent leaks and improve door operation. What it does:

• Replaces the dishwasher's interior door surface to protect insulation and internal components
• Restores a flat sealing surface to help the door latch and close properly
• Reduces risk of leaks caused by dents, cracks, or corrosion in the inner door
• Helps maintain proper alignment for the door gasket and mounting hardware

• Disconnect power and water supply before beginning any repair
• Handle panel edges carefully to avoid cuts; wear gloves if needed
• Require removing outer door panel, inner trim, or door screws—keep fasteners organized

This T-shaped water hose connector routes incoming water to separate internal hose lines, restoring proper water distribution inside the appliance. It replaces a worn or cracked hose tee to stop leaks and restore flow to internal components. What it does:

• Joins three water lines so water can be directed to multiple internal points
• Stops leaks caused by cracked or damaged tee fittings at hose junctions
• Restores reliable water flow to downstream parts that depend on the split connection
• Prevents hoses from separating at a failing junction

• Turn off and disconnect the appliance from the water supply before servicing
• Inspect hose ends and clamps; replace clamps or seals if worn
• Push hoses fully onto each barb and secure with appropriate clamps
• After installation, restore water and check all connections for leaks

This fastening ring secures mating appliance components by locking parts in place to prevent movement or separation during operation. It's a simple yet essential hardware piece that helps maintain proper alignment and reliable function. What it does

• Holds mating parts together to prevent wobble, vibration, or dislocation
• Keeps seals and assemblies properly seated to reduce noise and misalignment
• Helps maintain correct component spacing for smooth operation
• Commonly replaced when the original ring is bent, worn, or missing

• Designed for use with compatible OEM assemblies; follow for correct placement
• Inspect mating surfaces and replace any damaged clips, seals, or gaskets before reassembly
• Use proper tools to avoid deforming the ring during installation; do not force into place
• Disconnect power and follow safety procedures before servicing the appliance

This is a replacement screw used to secure internal components and exterior panels on compatible Bosch appliances. It restores proper fastening to reduce rattling and maintain part alignment. What it does:

• Fastens panels, brackets, or components in appliance assemblies
• Keeps removable parts securely attached to prevent vibration and noise
• Replaces missing or stripped screws that cause loose or misaligned parts
• Helps restore safe, stable operation when hardware is worn or lost

• Disconnect power and water before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but avoid over-tightening to prevent damage
• Keep small parts away from children and work on a stable surface

This replacement rod provides the small metal linkage used to stabilize and connect moving components in the appliance, restoring secure alignment and quiet operation. It fits where a worn or damaged rod causes looseness. What it does:

• Replaces a worn or bent support/linkage rod to restore proper mechanical connection
• Helps stop rattling, clunking, or shifting caused by a broken or loose rod
• Restores alignment so doors, levers, or internal assemblies operate smoothly
• Useful when visual damage, bending, or play is observed in the original rod

• One replacement rod

• Disconnect power and water before starting repairs
• Use basic hand tools; keep track of small fasteners and clips during removal
• Do not force parts; inspect surrounding components for wear when replacing the rod