Wfw0499sw01 Parts

This main wire harness routes power and control signals between the appliance's control board and components, restoring electrical connectivity so the unit operates reliably. It's a direct-replacement wiring assembly used where the factory harness is damaged. What it does

• Carries power from the control board to motors, sensors and switches so components receive the correct electrical connections.
• Restores circuit continuity when broken, frayed or burned wires cause intermittent operation or component failure.
• Commonly used when the appliance won't start, displays control errors, or individual components receive no power.
• Matches OEM connector ends and wire routing to maintain proper fit and function.

• One main wire harness assembly

• Disconnect power (unplug or switch off breaker) before inspecting or replacing the harness.
• Document wire locations or take photos before disconnecting connectors to ensure correct reassembly.
• Route harness to avoid pinch points and sharp edges; secure with existing clips or ties.
• If connectors or board terminals are corroded or damaged, replace or repair them to ensure a reliable connection.

This outer door panel replaces a damaged or dented refrigerator door exterior to restore appearance and protect internal components. It fits the door shell and gives your fridge a finished, uniform look. What it does:

• Replaces a cracked, dented or scratched door exterior to improve appearance
• Shields inner door components and insulation from damage and moisture
• Helps maintain a smooth, sealed surface for normal door operation
• Compatible with factory mounting points for a direct-fit replacement

• Recommended: remove all food and disconnect power before starting repair
• Handle panel edges carefully — wear gloves to avoid sharp sheet-metal edges
• Reuse original screws and brackets unless damaged; verify alignment before tightening

This outer door panel restores the refrigerator's exterior appearance and protects inner components from damage. It replaces a dented, scratched, or corroded outer shell to improve fit, finish, and sealing surface alignment. What it does

• Replaces the refrigerator's outer door panel to restore cosmetic appearance
• Protects internal door components from moisture and impact
• Helps maintain door alignment and proper gasket sealing when undamaged
• Commonly used when the door has visible dents, rust, or significant surface damage

• Disconnect power to the appliance and remove any stored items from the door before starting.
• Some disassembly (remove trim, handles, hinges, and inner liners) is normally required; keep fasteners organized.
• Use care to avoid scratching the new panel during installation and to preserve door gaskets and insulation.

This wire harness connects the appliance's electrical components to restore reliable circuit continuity and allow controls to operate correctly. It replaces a damaged or worn connector assembly to help resolve intermittent or failed electrical connections. What it does:

• Provides secure electrical connections between control, motor, and sensor circuits
• Replaces frayed, burned, or broken wiring that can cause power loss or intermittent operation
• Helps eliminate symptoms such as no power to components, erratic control behavior, or visible wiring damage
• Maintains proper routing and connector fit to prevent shorts and improve safety

• Disconnect power (unplug or shut off breaker) before beginning any repair
• Compare the replacement harness to the original to ensure routing and connector types
• Route the harness away from moving parts and hot surfaces; use existing clips or tie straps
• If connectors are tight, avoid forcing them—inspect terminals for corrosion and replace if necessary

This electronic control board is the appliance's main control module that manages cycles, user inputs and timed functions for reliable operation. Replacing a faulty control restores normal cycle selection and display responsiveness. What it does

• Receives user inputs and sends commands to motors, heaters, valves and timers
• Interprets button presses and touchscreen signals so cycles start and progress correctly
• Controls timing and sequencing for consistent performance
• Common symptom: unresponsive control panel or display, appliance won't start, or erratic cycle behavior

• 1 electronic control board

• Disconnect power before servicing to avoid shock or damage
• Handle the board carefully to prevent electrostatic discharge (use grounding strap if available)
• Compare the new board to the old one for connector count and mounting points before installation
• Some models require console or panel removal; retain all screws and fasteners for reassembly

This name plate is the decorative centennial badge that restores the appliance's exterior appearance and branding. It replaces a missing, damaged, or faded badge to keep the unit looking factory-finished. What it does

• Restores the appliance's exterior badge for a like-new appearance
• Replaces badges that are cracked, scratched, peeling, or discolored
• Helps identify the appliance style when the original emblem is missing
• Cosmetic part only — does not affect appliance operation

• One name plate

• For best results, clean the mounting area and remove dirt or wax before installation
• Handle carefully to avoid scratching the finish; use non-marring tools as needed
• If access behind trim is required, unplug the appliance or disconnect power before removing panels
• Follow OEM instructions for removal and reinstallation to avoid damaging clips or surrounding trim

The Valve is an OEM part for Whirlpool washing machines. It controls the flow of water into the washer tub at designated stages in the washing process. Water enters through the valve inlet and is distributed to internal components like the detergent dispenser, water pipes, and sump hoses. 

Causes of a bad valve can include mineral scale buildup inhibiting proper flow regulation over time, or cracks and leaks from wear and tear on rubber gaskets and seals. 

Symptoms of a bad valve include:

• Slow or incomplete fills during washing cycles  
• Water not dispensing correctly through hoses or dispensers
• External water leaks from the valve area
• Error codes related to water level or pressure issues

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Strike is an OEM part for Whirlpool washing machines. It is responsible for securely latching and locking the washer door shut during operation.

Causes of a bad door strike can include wear and tear over time, damage or bending from repeated use of the door latch, or issues with other interacting locking components like the door latch.

Symptoms of a bad door strike include:

• The washer door not latching or locking fully
• The door popping or releasing unexpectedly during a cycle
• Potential for leaks if the door is not sealing tightly
• Safety hazard if the door cannot be securely fastened

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This Whirlpool Clamp is an OEM part for select Whirlpool washing machine models. This clamp plays a crucial role in securing the washer's door seal or tub parts, ensuring a tight and leak-proof connection. 

Clamps in washers can become ineffective due to metal fatigue, corrosion, or damage during maintenance activities. A compromised clamp can lead to a loosened door seal or tub connections, resulting in potential leaks or operational inefficiencies.

Symptoms of a failing washer clamp include:

• Visible water leakage around the washer door or under the machine.
• The door seal appears loose or detached.
• Unusual noises during operation, indicating loose components.
• The washing machine vibrates more than usual, suggesting misaligned parts.
• Difficulty in securing the clamp during maintenance or part replacement.

This genuine Whirlpool OEM replacement part is compatible with Maytag, Jenn-Air, and Kenmore models.