Wfw0499sw01 Parts

This replacement trap sits in the dishwasher's sump/filtration area and captures larger food particles before they reach the pump. It helps maintain cleaning performance and reduce clogs that can lead to poor wash results or draining issues.

• Screens debris to protect the wash and drain pump
• Helps maintain proper water circulation and draining
• Damage or warping can let debris bypass the filter system
• Symptoms include poor cleaning, standing water, unusual grinding noises, or odors

• Disconnect power and shut off water supply before servicing
• Remove the lower rack; take out the lower spray arm and filters to access the trap
• Release the trap's locking tabs/fasteners, remove, and seat the new trap fully
• Reinstall filters and spray arm; run a short cycle to check for leaks and proper operation

The Pressure Switch is an OEM part for Whirlpool washing machines. It monitors water levels and pressure within the washer, functioning as an important safety component.

Symptoms of a bad pressure switch include:

• Failure to advance through wash cycles properly
• Inability to sense appropriate water levels for settings
• Unexpected stopping or failure to start

Causes can be failures due to worn contacts after extended use. Mineral buildup may also lead to malfunctions.

This OEM Whirlpool replacement is compatible with select Kenmore, Maytag, KitchenAid, and other models.

This replacement seal restores a tight barrier between mating parts in your appliance, helping contain moisture at the joint. A fresh seal prevents leaks and supports proper performance when the original is worn, cracked, or compressed. What it does:

• Creates a moisture-tight seal between components to contain water at the connection
• Helps prevent drips, pooling, or seepage around the joint
• Replace if the seal is cracked, torn, flattened, deformed, or brittle
• Symptoms can include dampness at the joint, small leaks, or a loose fit

• 1 seal

• Disconnect power and shut off water supply before servicing
• Note the seal's orientation during removal to ensure correct placement
• Clean and dry mating surfaces; remove old residue or debris for a proper seal
• Seat the new seal evenly without twisting; verify full, uniform contact before reassembly

The Cntrl-Elec is an OEM part for Whirlpool washing machines. This electronic control board regulates and monitors the various cycles and functions of the washer.

The Cntrl-Elec allows for controlled movement throughout each cycle, making sure you have proper agitation, washing, rinsing, and spinning. It also monitors water levels, cycle times, temperature settings, and more to facilitate effective cleaning of clothes load after load.

Causes of a controller failure can be due to circuitry damage from water intrusion, wear and tear over time, or failures in electrical components like microchips, sensors, and wiring.

Symptoms of a bad controller include: 

• Cycles not completing
• Failures to advance through wash stages
• Prolonged or stuck cycles
• Incorrect temperature readings
• Error codes displayed.

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This rotor is the rotating core of the dishwasher's wash motor. Paired with the stator, it spins to drive water circulation through the spray arms, helping restore consistent spray action and cleaning performance.

• Works with the stator to create the magnetic rotation that powers the wash/circulation pump
• Failure can result in little or no spray action and poor cleaning results
• Can lead to intermittent wash or loss of circulation during the cycle

• Disconnect power and water supply before servicing
• Access the wash motor/sump from beneath the unit; removal from the cabinet may be required
• Remove the motor cover/retainer, pull the old rotor straight out, and fully seat the new rotor; handle magnet surfaces carefully
• Reassemble, restore connections, and run a short cycle to check for leaks and proper circulation

The Control Board is an OEM part for Whirlpool washing machines. It serves as the main module regulating all electrical functions and cycle operations. The control board receives input signals, processes commands, and outputs power to run components through embedded software logic.

Causes of control board issues can be normal wear and tear, accumulated moisture exposure inside the machine damaging components, or power anomalies abruptly terminating operations. This durable OEM replacement restores full programmed functionality.

Symptoms of a bad control board include:

• Failure to start cycles
• Not advancing to subsequent stages
• Premature termination of cycles
• Errors codes/faults  

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement seal restores the appliance's sealing surface to help prevent leaks and maintain proper performance. It fits into the door/tub opening to re-establish a tight seal and reduce visible water or air escape. What it does:

• Forms a flexible sealing barrier around the appliance opening to help stop leaks.
• Keeps water, moisture, and common odors from escaping the appliance cavity.
• Helps maintain consistent internal conditions by closing gaps from worn or damaged seals.
• Common symptoms indicating replacement: visible cracks, tears, deformation, gaps, water pooling, or persistent odors.

• Always disconnect power and shut off water before starting work.
• Remove the old seal completely and clean the mounting surface before installing the new seal.
• Press the new seal evenly into the retainer/groove; avoid stretching or twisting the gasket.

The Door Boot Seal is an OEM part for Whirlpool front load washers. It is located internally and seals the opening between the washer tub and door. 

Causes of a faulty door boot may include mold or mineral deposits weakening the seal after heavy use over many years. Small punctures from sharp objects are also possible.

Symptoms include: 

• Water leaks at the interface where the boot meets the tub or door  
• Loose, floppy, or deformed boot material that no longer seals fully
• Mold/mildew growth indicating moisture has breached the seal

This OEM replacement is compatible with other Whirlpool and some Kenmore agitator washer models.

The Control Board is an OEM component specifically designed for Whirlpool top-load washing machines. Located inside the washer cabinet, it regulates all cycle functions, components, and associated electronics.

Symptoms of a faulty control board include the washer failing to start despite input, running constant agitation without pause, or inability to progress through phases of designated cycles.

Symptoms of a bad control board include:

• Cycles run erratically or fail to change stages
• Washer remains unresponsive or inactive  
• Water fails to drain or dispense properly
• Fault lights or error codes are frequently shown

This OEM Whirlpool replacement control board ensures smooth, reliable operation. Installed promptly, its robust circuits minimize component connection issues to improve machine life.

Compatible with some GE and Hotpoint models.

The Tank is an OEM part for Whirlpool washing machines. It properly dispenses detergent during the wash cycle.

Causes of a bad detergent tank can include: cracks, holes or other damage that cause leakage or improper detergent dispensing. Scaling or mineral buildup inside the tank over time may also lead to detergent dispensing issues.

Symptoms of a bad detergent tank include:

• Detergent not being fully dispensed or released during the wash
• Residue or leftover detergent remaining in the tank after cycles
• Clothes not getting properly cleaned due to insufficient detergent release

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This baffle is a direct-fit replacement part that helps restore the appliance's intended internal flow and operation. Install the baffle to replace a cracked, broken, or missing piece and help maintain consistent performance. What it does:

• Redirects internal flow to support proper operation and distribution
• Prevents internal components or items from contacting moving parts
• Helps reduce uneven performance caused by a damaged or missing baffle
• Matches the OEM shape so it fits into the existing mounting points

• Disconnect power (and water supply if applicable) before beginning any repair
• Basic hand tools may be required; handle edges carefully to avoid damage

This inner door panel replaces a cracked or damaged interior door surface to restore form and function. It protects internal components and helps maintain the door's appearance and insulating barrier. What it does:

• Replaces a damaged or cracked inner door panel to restore the door's structural integrity
• Protects internal components and wiring housed inside the door
• Helps maintain the door's interior appearance and insulation
• Commonly used when the door shows visible damage, deformation, or separated layers

• Disconnect power to the appliance before starting any repair
• Handle carefully to avoid scratching or stressing the panel; use soft supports when removing the door
• Installation typically requires removing the door trim and fasteners; keep hardware organized

This rotor is the rotating component of a motor that helps convert electrical energy into mechanical motion for appliance operation. It replaces a worn or damaged rotor to restore smooth motor rotation and reduce abnormal noise. What it does:

• Spins inside the motor to transfer rotational force to the appliance drive system
• Restores proper motor rotation when a rotor is damaged or scored
• Helps reduce grinding, knocking or excessive vibration caused by a bad rotor
• Works with the motor stator, bearings, and shaft to maintain normal operation

• Disconnect power to the appliance before starting any repair
• Rotor replacement often requires partial motor disassembly; handle bearings and shaft surfaces carefully
• Inspect associated bearings, shaft, and motor housing for wear and replace if needed

The Cover is an OEM part for Whirlpool washing machines. It is a protective outer casing located on the external components of the machine. The durable cover protects internal mechanisms, hoses, and other parts from debris, moisture, and accidental damage. It also contributes to the overall aesthetic appeal of the washer.

Symptoms of a bad cover can include cracks, dents, missing pieces, or warping that compromise the protective barrier. Without an intact outer shell, internal parts are more susceptible to corrosion or premature wear over time. 

Symptoms of a bad cover include:

• Gaps or openings that allow air/moisture inside the cabinet   
• Loss of an attractive, finished appearance
• Difficulty accessing internal components for maintenance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This heater is the electric heating element that warms air or water so your appliance reaches the proper operating temperature. Replacing a failed heater restores normal heating performance and helps cycles finish correctly. What it does:

• Generates heat needed for normal drying or wash cycles
• Allows the appliance to reach and maintain operating temperature
• Common symptom: appliance runs but does not heat or takes much longer to finish
• Common symptom: cycles complete without expected temperature or sanitizing action

• One replacement heater element

• Turn power to the appliance off at the breaker before starting any repair
• Handle the element carefully to avoid bending or damaging terminals
• Follow the appliance service manual for panel removal and wiring re-connection

The Speaker is an OEM component specifically designed for Whirlpool brand washers. It alerts users with chime tones or voice prompts during cycle operation or any error states. Precise acoustic engineering allows for clear audio reception even amid operating vibrations. 

Symptoms of a bad speaker include: 

• No audio tones or voice prompts were heard  
• Muffled, distorted, or unusually loud sounds
• Speaker making rattling or buzzing noises

Causes can be damage from water damage, defects in the audio circuitry, or aging components. 

This speaker ensures optimal user communication. Without it, you cannot verify cycle progress or troubleshoot issues. Its dependable performance maintains the washer's convenience.

This Whirlpool OEM part fits perfectly while extending the equipment's lifespan. It is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.