Wfw0499sw01 Parts

The Speaker is an OEM component specifically designed for Whirlpool brand washers. It alerts users with chime tones or voice prompts during cycle operation or any error states. Precise acoustic engineering allows for clear audio reception even amid operating vibrations. 

Symptoms of a bad speaker include: 

• No audio tones or voice prompts were heard  
• Muffled, distorted, or unusually loud sounds
• Speaker making rattling or buzzing noises

Causes can be damage from water damage, defects in the audio circuitry, or aging components. 

This speaker ensures optimal user communication. Without it, you cannot verify cycle progress or troubleshoot issues. Its dependable performance maintains the washer's convenience.

This Whirlpool OEM part fits perfectly while extending the equipment's lifespan. It is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This electronic control board is the appliance's primary logic module that manages cycle selection and overall operation, restoring proper control and response for the unit's user interface and timed functions. What it does:

• Receives input from selectors, buttons and sensors to start and advance cycles
• Sends signals to motors, heaters and valves to control cycle functions
• Interprets sensor feedback to manage timing and safety interlocks
• Helps display status and error feedback on the control panel
• Common symptom link: replaces unresponsive controls, blank or erratic display, or cycles that won't start or complete

• Disconnect power to the appliance before accessing internal components
• Handle the board by its edges and avoid static discharge (use grounding strap if available)
• Installation requires removing the control panel; retain screws and fasteners for reassembly

This timer and TSW is the electromechanical control assembly that advances wash/dry cycles and coordinates functions, restoring proper cycle sequencing and user control. Replaces a failed or unresponsive timer for reliable operation. What it does:

• Advances and times machine cycles so selected functions run in the correct order
• Energizes and coordinates internal switches and contacts during cycles
• Commonly used when cycles won't start, won't advance, or stop mid-cycle
• Helps resolve intermittent or non-functional timer knob behavior

• One timer and TSW assembly

• Disconnect power before servicing to avoid shock or injury
• Handle with care — fragile internal components and electrical contacts
• Verify fit and mounting orientation before final installation

This electronic control board replaces the main console controller to restore electronic operation and user input for your appliance. It manages cycle selection and overall electronic coordination so the appliance responds correctly to commands. What it does:

• Receives and processes user inputs from the console or touchpad
• Sends commands to heating, motor, and timing circuits to run selected cycles
• Manages timing and sequence logic for normal operation
• Can resolve issues like unresponsive controls, error codes tied to the console, or intermittent operation when the control board is faulty

• Disconnect power to the appliance before beginning any work to avoid shock or damage
• Handle the board carefully and avoid touching circuit components; use ESD precautions when possible
• Installation typically requires removing the console or control panel and unplugging wire harnesses; keep harness locations noted for reassembly

This screw is a genuine replacement fastener used to secure appliance panels and components for a reliable fit. It restores proper fastening where original screws are missing, stripped, or damaged. What it does:

• Fastens panels, trim, brackets or small components to keep parts aligned and secure
• Replaces missing or damaged screws that can cause loose panels or rattling
• Restores proper clamping force to prevent movement and wear on adjacent parts
• Matches OEM function and fit when the correct part number is used

• Disconnect power and water before servicing the appliance
• Use the correct driver to engage the head cleanly and avoid stripping
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic

The Tank/Reservoir is an OEM component specifically designed for Whirlpool washing machines. It holds incoming water for measured dispersal during cycles.  

Symptoms of a faulty tank/reservoir include:

• Incomplete fills leading to excessively short or long wash times
• Water leaks developing internally or externally  
• Unusual vibrations or wobbles coming from the storage area

Causes may involve cracks appearing after years absorbing impact or stress. Connectors could corrode inhibiting sealed capacity.

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models as well.

This dispenser housing replaces a damaged or worn door-mounted dispenser on compatible refrigerators, restoring neat operation and reliable access to the dispenser opening. It provides a clean, secure mount for the dispenser components. What it does:

• Houses and supports the dispenser controls and chute, keeping components aligned for reliable use
• Provides a finished opening in the refrigerator door for dispensed items
• Helps prevent leaks and keeps internal components protected from damage
• Restores proper fit and appearance to a worn or cracked dispenser area

• One dispenser housing

• Install with power and water supply turned off; follow OEM instructions for door panel removal
• Small trim clips and fasteners may be required; verify all mounting hardware before starting
• Handle with care to avoid damaging the dispenser finish or door trim during installation

This rotor is the rotating element from the appliance's motor assembly that helps convert electrical energy into mechanical rotation. Replacing a worn rotor restores smooth motor operation and reduces noise or intermittent spinning. What it does:

• Rotates with the motor shaft to produce the torque needed for normal operation
• Works with the motor's stator/field assembly to maintain consistent rotation
• Common symptoms of a failing rotor: loud grinding or squealing, no spin or intermittent spin, and unusual vibration
• Fits where the motor's internal rotor is specified as the service replacement

• One rotor

• Disconnect power before servicing; follow all safety guidelines
• Replacement typically requires partial motor disassembly and basic mechanical skill
• Inspect bearings, shaft, and surrounding motor components while servicing

The HOSE is an OEM part for Whirlpool washing machines and is designed to seal and protect the pump outlet hose from damage or leaks. The hose washer ensures a tight seal to prevent water from escaping during pump operation.  

Symptoms of a bad hose include:

• Water leaks from around the pump outlet area 
• Puddles or drips forming beneath the washer 
• Extended or incomplete filling during washes

Causes of failure involve wear and cracking of the rubber material from constant flexing of the hose during machine operation. Mineral or soap buildup can also cause the hose washer to fail to seal properly.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. Replacing the failed hose washer can prevent further water damage issues.

This replacement door restores proper closure and function to the appliance, helping stop drafts, maintain temperature, and return the unit to a like-new appearance. Designed as a factory-style replacement for select Whirlpool appliances. What it does

• Replaces a damaged, dented, or missing door to restore secure closure and normal operation.
• Helps maintain internal temperature and prevents air leaks that can affect performance.
• Stops rattling or misalignment caused by warped or bent doors.
• Restores the appliance's exterior appearance when the original door is scratched or dented.

• One complete replacement door.

• Disconnect power (and water if applicable) before beginning any repair.
• Handle glass and painted surfaces with care to avoid damage or injury.
• Installation may require removing trim or other panels; keep fasteners organized.
• If the door is heavy or awkward, have a second person assist to avoid dropping or damaging the part.

This factory spring provides the designed return force/tension in its assembly so parts move smoothly and stay in position. Replacing a fatigued or broken spring restores proper movement and feel to the affected mechanism. What it does:

• Applies and maintains tension/return force within the specified mechanism
• Helps levers, latches, doors, or linkages move and hold position as designed
• Can resolve loose, sluggish, or non-returning movement in the involved part
• Reduces squeaks/rattles caused by weak or broken spring tension

• 1 spring

• Disconnect power and shut off water/gas before servicing
• Note the original spring's orientation and routing; take photos for reference
• If your model uses two matched springs for balance, replace them as a pair
• Avoid over-stretching; follow your product's service information for correct tension/placement
• Inspect related components (cables, hinges, brackets) and replace if worn

This replacement cross-flow hose routes fluid/air between refrigerator components to restore normal operation and stop leaks or drainage issues. Durable black hose designed to match the original fit and function. What it does

• Routes condensate/drain or air between evaporator and drain areas to ensure proper flow
• Replaces cracked, split, or deteriorated hose that can cause leaks or pooling under the unit
• Helps prevent frost or moisture buildup when the original hose is blocked or damaged
• Restores correct drainage/flow where a worn hose caused poor performance or water on the floor

• One black cross flow hose

• Disconnect power to the appliance before starting any repair
• Drain water and remove any clips or clamps carefully to avoid damaging adjacent components
• Inspect and replace associated clamps or seals as needed for a secure, leak-free connection

This clamp secures a flexible appliance hose to a fitting to help prevent leaks and keep connections tight. It's a small but essential part that restores a proper seal on water or drain lines. What it does:

• Holds a hose firmly to a tailpiece, barb or connector to reduce leaks and hose slippage
• Helps stop intermittent dripping or pooling caused by loose hose connections
• Restores a proper seal after hose replacement or maintenance
• Works on common appliance water/drain lines where this clamp style is used

• One hose clamp

• Disconnect power and shut off water to the appliance before starting any work
• Allow the appliance and hoses to cool if recently used; use gloves and eye protection
• Use appropriate pliers or a screwdriver (depending on clamp style) to remove and install the clamp; avoid over-tightening
• Inspect the hose and fitting for damage; replace the hose if cracked or worn

This suspension component stabilizes the machine's moving assembly to reduce vibration and noise. Replacing a fatigued suspension part helps restore smoother, quieter operation and protects nearby components from excessive stress during high-speed cycles.

• Controls movement to keep the drum/basket assembly steady
• Helps reduce shaking, banging, and walking during operation
• Worn suspension can cause excessive vibration and noise
• Restores stability to improve overall performance and cycle completion

• Disconnect power; shut off water supply
• Support the moving assembly before removing fasteners or pins
• Install in the same position/orientation as the original part
• After reassembly, run a test cycle to verify smooth operation