Wfw6620hc Parts

The Shipping Bolt is an OEM part for Whirlpool washing machines. Located within the base frame, these bolts serve as anchoring points to secure the washer during product transport and installation. 

Symptoms of bad shipping bolts include:

• Loose footing or unstable/rocking movement of the entire washer unit
• Strange noises, like a clicking or rattling, coming from the base area  
• Difficulty leveling the legs or maintaining proper position

The causes of faulty shipping bolts are generally worn from repeated removal and reinstallation during service procedures. Corrosion over time can also degrade their integrity. 

Replacing with new OEM bolts from Whirlpool will securely anchor the washer going forward. This part is compatible with models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore. A stable base prevents potential issues or safety hazards.

The Control Panel Assembly is an OEM part for Whirlpool ovens. It houses all control buttons, knobs, and electronic components that operate the oven. The control panel is responsible for setting and adjusting the bake, broil, and convection modes and the oven temperature. 

Causes of a bad control panel can include liquid damage, failure of electronic components, or wear and tear over time.

Symptoms of a bad control panel include:

• Non-responsive or stuck buttons  
• Inability to power on the oven
• Failure to change oven modes or temperatures
• Unusual beeping, clicking, or flashing lights

Over time, the control panel can be damaged from accidental spills, heavy use, or mishandling. Replace yours today with this genuine OEM Whirlpool part to restore full functionality to your oven.

This OEM part is compatible with KitchenAid, Jenn-Air, Amana, Admiral, Norge, Roper, and Kenmore models.
 

This replacement screw secures appliance panels and components. Use this OEM fastener to swap out stripped, corroded, or missing hardware so assemblies stay tight, aligned, and quiet for reliable day-to-day operation.

• Provides secure attachment for panels, brackets, and internal assemblies
• Direct replacement for stripped, corroded, or lost screws
• Can help with symptoms like vibration, rattling, or loose/misaligned parts
• Supports proper fit to reduce gaps or unwanted movement

• Disconnect power; for gas or water appliances, shut off the supply before service
• Note hardware order and retain any spacers or clips from the original setup
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Repair or replace the mating part before installation

The Shipping Bolt is an OEM part for Whirlpool washing machines. This assembly secures the washer tub during shipping to prevent movement and damage. 

Causes of a bad shipping bolt can include rust, corrosion, or wear due to repeated use over many shipment cycles. Failures may also occur due to the use of improper fasteners during installation.

Symptoms of an improperly installed or damaged shipping bolt include:

• Vibration or rattling noises coming from inside the washer cabinet 
• Shaking of the entire machine, especially during spin cycles
• Looseness or movement detected in the washer tub

Replacing with this OEM part ensures your washer tub is securely fastened in place maintaining proper operation and balance.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Drain Hose is an OEM part for Whirlpool front-loading washers. This hose is responsible for transporting water from the washer tub out to the household plumbing drain.

Causes of a bad drain hose can include cracks developing over time due to the constant cycle of filling and emptying during normal operation. Mineral or lime buildup inside the hose may also cause blockages.

Symptoms of a bad drain hose include:

• Water not draining or draining slowly from the washer tub  
• Water remaining or collecting at the bottom of the tub after cycles
• Leaks occurring from cracks along the hose

This OEM part is compatible with some KitchenAid, Jenn-Air, and select Kenmore models.

Contains two, six foot long braided hoses with 90 degree ends.

The HEATER is an OEM component specifically designed for Whirlpool washing machines. It raises water temperature during heated cycles for effective cleaning. 

This wash heater element features carefully engineered heating coils and wiring to heat incoming tap water. Elevated temperature boosts the performance of detergent formulations to cut through tough stains on clothes and bedding.

Causes of a bad washer heater can include cracked or broken heating coils, loose connections to internal wiring, or accumulated limescale buildup inhibiting heat transfer.

Symptoms of a bad Heater include:

• Inability to reach or maintain desired water temperature 
• Fluctuations in water heat during cycles
• Reduced cleaning effectiveness on heavily soiled items
• Error messages related to abnormal temperature readings

This part is also compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Kenmore washing machines.

This set of washer fill hoses connects your home's hot and cold water supply to the washer's inlet valves. Replacing aging hoses helps prevent leaks and ensures the washer fills properly for every cycle.

• Supplies hot and cold water from household faucets to the washer's inlet valves
• Helps address leaks, bulges, or cracks in old hoses
• Can resolve drips at fittings and water on the floor
• Improve slow or no-fill issues caused by kinks or internal blockages

• Unplug the washer and turn off both water supplies before starting
• Place a towel or pan to catch residual water; disconnect old hoses from faucets and inlet valves
• Attach new hoses to the correct hot/cold connections; tighten connections securely without overtightening
• Open valves, check for leaks at both ends, and re-tighten if needed

Size: 29 1/4 inches x 31 1/4 inches. This universal washer drip tray is large enough for duet washers and sits under the washer to protect your floors from scuffs, spill, etc. Includes a PVC drain fitting.

This factory fastener secures appliance components such as panels, brackets, and handles. Replacing a missing or damaged screw restores a tight fit, reduces rattles, and helps keep parts aligned for smooth, reliable operation.

• Secures components to the appliance frame or assemblies
• Helps maintain alignment and structural stability
• Replaces missing, rusted, or stripped hardware
• Common symptoms include loose/wobbly handles or panels, rattling/vibration noises, or a visibly missing screw

• Disconnect power before servicing
• Use the correct driver/bit and start threads by hand to avoid cross-threading
• Do not overtighten; snug until secure
• Replace any that are corroded or stripped for an even hold

The Divider is an OEM part for Whirlpool washers. It fits within the dispenser drawer, creating separate compartments for different laundry products such as detergent, fabric softener, and bleach. It prevents mixing and allows for convenient dispensing during each wash cycle.

A bad dispenser drawer divider can occur due to wear and tear over time or accidental damage. If you notice symptoms such as a loose or broken divider, difficulty in separating the compartments, or improper dispensing of laundry products, it may be time to replace this part.

Symptoms of a bad dispenser drawer divider include:

• Loose or broken divider
• Difficulty in separating the compartments
• Improper dispensing of laundry products

Restore your Whirlpool washer's dispenser drawer by replacing the faulty or damaged divider with this genuine OEM part.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Dispenser Drawer Handle is an OEM part compatible with Whirlpool washers. It provides a convenient grip for opening and closing the dispenser drawer. It allows you to access the detergent, fabric softener, and bleach compartments within the dispenser drawer.

A bad dispenser drawer handle can occur due to wear and tear, accidental damage, or excessive force when operating the handle. If you notice symptoms such as a loose or broken handle, difficulty in opening or closing the dispenser drawer, or the handle not staying securely in place, it may be time to replace this part.

Symptoms of a bad dispenser drawer handle include:

• Loose or broken handle
• Difficulty in opening or closing the dispenser drawer
• Handle not staying securely in place

Restore your Whirlpool washer's dispenser drawer by replacing the faulty or damaged handle with this genuine OEM part.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This leveling foot adjusts the height of your appliance to keep it stable and level on uneven floors. Replacing a worn or missing foot can reduce rocking, vibration, and noise for smoother, safer operation.

• Threads into the base to provide height adjustment
• Helps level the appliance front-to-back and side-to-side
• Restores stability to reduce wobble, vibration, and rattling
• Replace if cracked, stripped, broken, or missing

• Disconnect power; shut off water or gas if applicable
• Carefully raise or tilt and support the appliance to access the foot
• Unthread the old foot; hand-thread the new foot to avoid cross-threading, then adjust with a wrench as needed
• Level the appliance side-to-side and front-to-back; tighten any lock nut if equipped

The Tub to Pump Hose is an OEM part for Whirlpool washing machines. This hose connects the washer tub to the pump, allowing water to flow between the two components.

The hose plays an important role in draining water from the wash tub after each cycle. It features a flexible yet durable design to withstand constant water pressure and prevent kinks that could block flow.

Causes of a bad hose can include cracks or splits from extended use, corrosion of connectors over time, or accidental punctures.

Symptoms of a bad hose include:

• Incomplete or slow draining of water after cycles
• Puddles or leaks near the pump or tub area
• Wet clothes indicating standing water issues
• Strange noises during draining phases

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement screw secures panels, brackets, and internal components in your appliance. Replacing a missing or stripped screw restores a tight, rattle-free fit and helps keep parts properly aligned and protected during operation.

• Fastens appliance panels, brackets, and hardware in the designated locations
• Replaces missing, stripped, or corroded fasteners
• Helps reduce vibration noise and looseness from unsecured parts
• Restores proper fit and alignment after service or reassembly

• Disconnect power; turn off water supply before servicing
• Match the screw to the original location and replace one at a time to maintain alignment
• Use the correct driver; tighten snugly without overtightening to avoid stripping metal or cracking plastics
• If threads in the mating hole are damaged, repair/replace the clip or insert as specified in the service manual

This replacement hose routes water between internal components, maintaining a secure, leak-resistant path so your appliance can fill, circulate, and drain as designed. Replacing a damaged or clogged hose restores proper water flow and helps prevent leaks.

• Transfers water between components; correct routing and clamping keep connections sealed
• Common failure signs: leaks, kinks, cracks, soft spots, or internal blockages
• Helps resolve: water under the unit, standing water or slow draining, fill/drain error codes, and musty odors from trapped water

• Disconnect power and shut off the water supply before servicing
• Place towels or a shallow pan to catch residual water; note original routing and clamp positions
• Inspect/replace clamps if worn; fully seat the hose on fittings and tighten clamps securely
• Run a test cycle and recheck all connections for leaks