Wfw99550ww00 Parts

Color: Chrome Shadow (Grey)

The Control Board is an OEM part for Whirlpool washers. It is responsible for controlling and coordinating the various functions of the washing machine. It regulates the timing, temperature, and water levels during each wash cycle.  

A bad control board can occur due to electrical issues, power surges, or component failure. If you notice symptoms such as the washer not starting, unresponsive buttons or display, or error codes appearing on the control panel, it may be time to replace the control board.

Symptoms of a bad control board include:

• Washer not starting or turning on
• Unresponsive buttons or display
• Error codes appearing on the control panel

Restore your washer by replacing the faulty or damaged control board with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Console is an OEM part for Whirlpool washing machines. It houses the control panel and electronic components that operate the washer. The console provides an interface for selecting cycles and options while shielding internal mechanisms.

Symptoms of a bad console can include cracks, impact damage, or faulty electronic components like non-responsive buttons. 

 Causes of a bad console include normal wear and tear over time, moisture intrusion leading to corroded electronics, and accidental mishandling.

Symptoms of a bad console include:

• Buttons that do not work or selections that do not register  
• Loose or damaged door or interface paneling
• Error codes or cycling issues due to wire or component damage

This Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This electronic control board assembly replaces a failed console control module to restore command and timing functions. It manages user inputs and cycle signals so your appliance responds correctly to settings and starts cycles reliably. What it does:

• Interprets touchpad/selector inputs and sends signals to the appliance's motors, valves, and displays
• Controls cycle timing, start/stop, and key functions for proper operation
• Can resolve symptoms like unresponsive controls, error codes, or cycles that won't start
• Replaces a faulty or damaged control board to restore normal electronic operation

• Disconnect power to the appliance before starting any repair
• Handle the board by the edges and avoid static discharge; wear an anti-static wrist strap if available
• Verify connector locations and orientation before removing the old board; take photos for reference

This replacement trap sits in the dishwasher's sump/filtration area and captures larger food particles before they reach the pump. It helps maintain cleaning performance and reduce clogs that can lead to poor wash results or draining issues.

• Screens debris to protect the wash and drain pump
• Helps maintain proper water circulation and draining
• Damage or warping can let debris bypass the filter system
• Symptoms include poor cleaning, standing water, unusual grinding noises, or odors

• Disconnect power and shut off water supply before servicing
• Remove the lower rack; take out the lower spray arm and filters to access the trap
• Release the trap's locking tabs/fasteners, remove, and seat the new trap fully
• Reinstall filters and spray arm; run a short cycle to check for leaks and proper operation

This replacement frame restores the structural support for the component it holds, helping it fit securely and operate smoothly. Replace a cracked, warped, or broken frame to bring back proper alignment and stability.

• Provides rigid support and correct alignment for the attached component
• Maintains proper spacing and level so items sit correctly
• Helps associated drawers or bins slide and seat smoothly where applicable
• Common signs of failure: cracks, broken tabs, warping, wobble, or poor fit

• Disconnect power before servicing
• Remove the affected assembly and set aside any inserts or hardware from the old frame
• Transfer reusable parts (such as glass, rails, or gaskets) to the new frame
• Ensure the frame is fully seated and avoid overtightening any fasteners

This replacement seal restores a tight barrier between mating parts in your appliance, helping contain moisture at the joint. A fresh seal prevents leaks and supports proper performance when the original is worn, cracked, or compressed. What it does:

• Creates a moisture-tight seal between components to contain water at the connection
• Helps prevent drips, pooling, or seepage around the joint
• Replace if the seal is cracked, torn, flattened, deformed, or brittle
• Symptoms can include dampness at the joint, small leaks, or a loose fit

• 1 seal

• Disconnect power and shut off water supply before servicing
• Note the seal's orientation during removal to ensure correct placement
• Clean and dry mating surfaces; remove old residue or debris for a proper seal
• Seat the new seal evenly without twisting; verify full, uniform contact before reassembly

This rotor is the rotating core of the dishwasher's wash motor. Paired with the stator, it spins to drive water circulation through the spray arms, helping restore consistent spray action and cleaning performance.

• Works with the stator to create the magnetic rotation that powers the wash/circulation pump
• Failure can result in little or no spray action and poor cleaning results
• Can lead to intermittent wash or loss of circulation during the cycle

• Disconnect power and water supply before servicing
• Access the wash motor/sump from beneath the unit; removal from the cabinet may be required
• Remove the motor cover/retainer, pull the old rotor straight out, and fully seat the new rotor; handle magnet surfaces carefully
• Reassemble, restore connections, and run a short cycle to check for leaks and proper circulation

This replacement hose routes fluid or air within your appliance, providing a secure, leak-resistant path between components. A cracked, brittle, or kinked hose can cause leaks or performance issues—replacing it helps restore proper operation.

• Provides a sealed pathway for water or air between internal components
• Supports correct fill, circulation, draining, or pressure sensing as designed
• Prevents leaks at connections when properly clamped and routed
• Common symptoms: visible cracks or kinks, water leaks, standing water, or related fault/error codes

• Disconnect power; shut off the water supply
• Place towels or a pan to catch residual water before removal
• Note hose routing and clamp positions; take photos for reference
• Reuse or replace clamps as needed; secure connections and check for leaks after reassembly