Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Dishwasher leaking or rattling? This motor mount clamp secures the pump assembly to prevent movement, leaks, and vibration. Quick DIY fix.
Dryer stops early on auto cycle but works on timed? The moisture sensor control board monitors dryness levels. DIY-friendly repair, 15-20 minutes.
Did some research via the internet and figured the problem was likely the moisture control board. Watched a video of the repair of a similar unit in order to locate the moisture control board. Used the chat feature with one of the Appliance Parts Pros to get a schematic of the dryer and advice about where to use the putty knife to release the springs for access to the board. Thanks to the lady I chatted with for expert advice. Once the actual task was started, the repair took 15 or 20... Read more
Main top panel assembly that forms the finished top surface of your dryer. Replace if cracked, discolored, damaged, or worn to restore appearance.
Replaced with a new top. Read more
Dryer won't signal when cycle ends or buzzer stuck on? This adjustable buzzer kit restores audible alerts for timers and notifications. DIY install.
I watched the repair video AppliancePartsPros.com had on each repair and followed the instructions. Read more
Mounting screw that secures the rear panel to the washer cabinet frame. Replace if screw is missing, stripped, or damaged to maintain proper panel fit.
6-20 screw secures panels, brackets, and internal components. Replace stripped, missing, or damaged screws to restore proper fit and eliminate rattling.
Ordered a kit with new belt, rollers and idler pulley. Used instructions in kit, YouTube videos and instructions I found under the console of the dryer. Found that the idler pulley had frozen and that the belt was nearly worn through. Repair it self was not difficult. The problem I had was in hooking the new belt around the idler pulley. It was solved by removing the one screw holding the air discharge tube and sliding the tube rearwards. This allowed me to get my arm in behind the idler pulley... Read more
Restores proper tension so your dryer door stays closed and operates smoothly. Replace if the door won't latch or pops open. Confirm fit by model number.
Purchased the above kit to repair the door hardware. Also had to purchase door hinges to replace one I found broken after disassembling the dryer front. Parts arrived as shown in the online pictures, and arrived within 4-5 business days. Read more
Ice maker overflowing or splashing during fill? This small nozzle directs water cleanly into the ice mold to prevent leaks and ensure proper cube formation.
Fastener secures panels, brackets, and internal assemblies in washers, dryers, and refrigerators. Replace stripped, missing, or worn screws.
Seals unused factory or service holes on your dryer cabinet or liner. Restores a clean appearance and keeps dust out. Replace if cracked, broken, or missing.
Replaced broken part. simple pop in place. Read more
Fix no water flow or leaks in your dryer with this water inlet valve assembly. Controls water supply to restore proper function. Direct fit replacement.
Dryer won't stop tumbling after cycle or Wrinkle Guard stuck on? This rotary switch controls post-cycle tumbling. Simple twist-out replacement.
Dryer won't heat or gas won't ignite? This gas valve controls gas flow to the burner assembly. Moderate DIY repair requiring drum removal.
Remove the top cover, front door panel, drum, and back cover to access the valve assembly hold down bolts. Unhook the gas line, remove the electrical connections to the coils, then R&R the valve assembly. Don’t forget to hook the connectors back to the coils before putting everything back together... Read more
Gray acrylic spray paint for coating worn or chipped dryer drum interiors. Restores the protective finish when the original coating is scratched or flaking.
Completely removed dryer drum cleaned surfaces ready for paint applied paint acquired from you it did a wonderful job with one can of paint will use for a while and acquire another can of paint for second coat thank you so much for your help the whirlpool dryer drum paint was exactly what it said it would do Read more
Dryer won't heat or flames are yellow? This butane burner orifice meters gas flow for clean, reliable ignition. Required for butane conversions.
Replace cracked, split, or leaking dryer water hoses with this complete hose kit. Includes brass Y adapter and fittings for direct installation.