Wgd8000dw Parts

The Console is an OEM part for Whirlpool electric dryers. This console houses the dryer control panel, buttons, toggle switches and electronic display.

Causes of a bad console could include physical damage from impact or repeated opening and closing of the dryer door. Over time, constant exposure to heat and vibration can also degrade sensitive electronic components inside.

Symptoms of a faulty console are:

• Non-responsive or uncalibrated control buttons
• Flickering or blank control display
• Inability to select cycles or temperature settings
• Loose fitting or opening console panel

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This multi-vent plug seals an unused vent opening to stop unwanted airflow and keep the appliance interior protected. It's a direct-fit replacement designed to restore proper venting and help prevent drafts, debris, and pests. What it does:

• Plugs an unused multi-vent opening to prevent air leakage and drafts
• Helps keep dust, lint, and small debris out of the appliance vent path
• Reduces the chance of pest entry through an open vent
• Restores the intended vent configuration after service or part removal

• Disconnect power or gas to the appliance before servicing for safety
• Install by aligning and pressing the plug firmly into the vent opening until seated
• Do not force if resistance is excessive; inspect for obstructions or damage
• Replace damaged parts before installing the plug

This top panel replaces the appliance's cabinet top to restore a flush, secure surface and protect internal components. It's a direct-fit exterior panel used when the existing top is dented, bent, or damaged. What it does:

• Covers and protects the washer/dryer cabinet and internal components from debris and spills
• Provides the mounting surface for controls, console, and trim
• Restores a straight, even appearance when the original top is warped or dented
• Helps maintain proper alignment of adjoining panels and doors

• 1 top panel

• Unplug the appliance or disconnect power before starting work
• Keep fasteners organized and hand-tighten before final torque to ensure proper fit

A duct collar that connects and secures the dryer's exhaust duct to the appliance, helping channel hot, moist air safely out of the dryer. Replaces a damaged or loose collar to restore a tight vent connection. What it does

• Provides a secure connection point between the dryer and the exhaust duct to help direct airflow out of the appliance.
• Helps reduce vent leaks that can cause poor drying performance or excess lint buildup in the cabinet/closet.
• Restores proper duct alignment to reduce rattling or vibration from a loose duct connection.
• Used when the existing collar is cracked, bent, corroded, or no longer holds the duct firmly.

• One duct collar.

• Always disconnect electrical power before servicing the dryer.
• Clean lint from the vent path before installing the new collar to ensure good airflow and reduce fire risk.
• Installation typically requires basic hand tools and a clamp or screws to secure the duct; follow the dryer's service instructions.

This replacement wire harness connects electrical components to restore reliable power and signal paths in select Whirlpool appliances. Use it to replace a damaged or worn harness that causes intermittent operation or loss of function. What it does:

• Routes power and signal connections between appliance controls and components
• Replaces frayed, melted, or broken wiring that can cause intermittent operation
• Helps resolve symptoms such as no power to a circuit, intermittent operation, or control errors
• Ensures proper connector fit to maintain electrical continuity

• Disconnect power (unplug appliance or turn off circuit breaker) before starting any repair
• Verify connector orientation and routing against the service diagram before removing the old harness
• Secure harness away from pinch points and moving parts; avoid contact with sharp edges or heat sources

This is a genuine OEM door compatible with dryers. The door is a critical component as it keeps the clothes and materials inside the dryer while the appliance is running. In many cases, the dryer may not start at all unless the door is closed properly. Thus, if the user notices the dryer won't power on due to a dented, bent, detached, or broken door, this part should be immediately replaced. The appliance will need to be completely disconnected from all power sources before repairs are undergone and work gloves should be worn to ensure safety.This part has been made by Whirlpool and sourced directly from the manufacturer. It is sold individually. This door is manufactured from high-quality, durable, non-corrosive metal. It is an authentic replacement part and thus is compatible with dryers manufactured by Whirlpool, Maytag, Jenn-air, and Amana.

This replacement dryer drum restores the rotating clothes drum that tumbles and contains laundry during drying. It returns the drum surface and shape needed for even tumbling and helps prevent fabric damage from a warped or damaged drum. What it does:

• Replaces the rotating drum that holds and tumbles clothes during the dry cycle.
• Restores a smooth, true drum surface to reduce rubbing, snagging, or fabric wear.
• Helps stop symptoms like loud scraping or rubbing noises, uneven tumbling, or visible drum damage.
• Works with existing rollers, glides, belt, and seals—replace those parts separately if they show wear.

• One dryer drum

• Disconnect power (and gas supply if applicable) before starting any repair.
• The drum is heavy and bulky—have a helper and protect the appliance finishes during removal.
• Inspect and replace worn rollers, glides, belt, and seals while the dryer is open to prevent repeat failure.
• Follow the appliance service manual for disassembly steps and torque/fastening details.

This drum baffle is the interior vane that lifts and tumbles clothes inside the dryer drum, helping move garments for even drying and reducing tangling. It replaces a worn or broken vane to restore normal tumbling action. What it does:

• Guides and lifts clothes as the drum rotates to improve airflow and drying consistency
• Reduces garment bunching and helps prevent tangling during cycles
• Prevents direct cloth contact with the drum shell where worn or broken baffles can catch fabric
• Restores proper drum rotation balance when a missing or damaged baffle causes wobble or uneven wear

• Intended for a user familiar with appliance repair; disconnect power before servicing
• Typically installs from inside the dryer cabinet or by removing the drum; follow OEM diagram for exact procedure
• Inspect mounting tabs and screws; replace any damaged fasteners for a secure fit
• If dryer shows additional noise or vibration after replacement, recheck alignment and mounting hardware

This bracket is used to attach and is included in the igniter kit. Save money by ordering the igniter kit 279311.