Whirlpool Gd25bfchw00 Parts

This replacement screw secures panels, trim pieces and small assemblies so covers and components stay aligned and rattle-free. It's a simple, direct fastening part used when an original screw is missing or damaged. What it does:

• Fastens panels, trim, control housings and other small components to the appliance chassis
• Replaces missing, worn or stripped screws that cause loose panels or rattling noises
• Restores correct alignment of covers and trims after service or disassembly
• Provides a direct, hardware-level repair instead of temporary fixes

• Disconnect power (and gas, where applicable) and ensure the appliance is cool before starting.
• Use the correct screwdriver bit and turn until snug; do not overtighten to avoid stripping threads or damaging parts.
• Keep removed hardware for reference; replace like-for-like if threads or inserts are damaged.
• Wear eye protection and gloves when working on appliances.

Color: Black. Other colors: For biscuit use 2307008T, for white use 2307008AP.

This TRACK is the replacement guide that keeps a door or drawer aligned and sliding smoothly. It restores stable movement and reduces misalignment or scraping for a properly operating opening mechanism. What it does:

• Guides the door or drawer along its intended path to maintain alignment and smooth motion
• Prevents rubbing, sticking, or uneven movement that can lead to noisy operation
• Helps keep the panel or drawer from sagging or catching on the frame
• Restores consistent closing and opening performance when worn or damaged

• One replacement track

• Disconnect power to the appliance before starting any repair
• Access may require removing the panel, screws, or trim; keep fasteners organized
• Inspect adjacent rollers, brackets, and clips and replace any visibly worn parts

This door shelf trim replaces the damaged or worn plastic trim that secures and finishes the front edge of a refrigerator door shelf, restoring appearance and helping keep items in place. What it does

• Replaces cracked, broken or missing door-shelf trim that allows items to fall forward
• Restores a finished look to the refrigerator door interior
• Helps retain bottles and containers on the door shelf edge
• Matches OEM fit and mounting points for straightforward replacement

• One door shelf trim piece as shown

• Typically snaps into the front edge of the door shelf; remove the shelf/bin first if needed
• Inspect mounting tabs for damage and replace bin/shelf if tabs are broken
• Use gentle prying with a plastic tool to avoid scratching surrounding surfaces
• Unplug the appliance or disconnect power if working near electrical components or lights

This molded air deflector directs cold freezer airflow around the icemaker assembly to help maintain consistent ice production and reduce partial fills. It's a simple replacement that restores proper air routing inside the freezer compartment. What it does:

• Guides cold air to and around the icemaker so the unit can cool evenly
• Helps prevent warm-air pockets that can cause small or misshapen ice
• Restores intended airflow after a cracked or missing deflector
• Passive part with no electrical components or adjustments

• One icemaker air deflector

• Basic snap- or screw-in replacement; inspect mounting tabs for damage before installing
• Turn off power to the refrigerator before accessing the icemaker area
• Handle plastic parts carefully to avoid cracking mounting clips

This is a replacement wire harness that restores electrical connections between components so your appliance powers and controls operate correctly. It provides the factory-style wiring needed for reliable signal and power routing. What it does

• Carries power and control signals between major components so circuits can operate as intended
• Commonly used when damaged, melted, cut, or corroded wires cause intermittent operation or loss of function
• Can resolve symptoms such as components not receiving power, control buttons or lights not responding, or erratic behavior due to open/shorted wiring
• Matches OEM routing and connector ends to maintain original fit and connections

• One complete wire harness assembly as shown

• Disconnect all power (unplug or shut off breaker) before starting any repair
• Note wire routing and connector locations or take photos before removal to ensure correct reassembly
• Inspect connectors and mounting clips; replace any broken retainers to prevent chafing or strain

A roll pin (spring pin) that secures rotating or sliding components by fitting into matched holes to hold shafts, levers, or brackets in place. Replaces a worn or damaged pin to restore proper mechanical engagement. What it does:

• Holds shafts, levers or hinges in position by expanding into drilled holes for a snug, vibration-resistant fit
• Keeps pulleys, rollers, or linkages from moving out of alignment or sliding off their shafts
• Common symptom: loose or wobbling pulley, lever, or shaft where the retaining pin is worn or broken
• Common symptom: noisy or intermittent operation caused by a pin that no longer secures moving parts

• Inspect mating holes and shaft for wear; replace pin with correct size to ensure secure fit
• Use appropriate pliers or a pin punch and hammer to drive the pin in or out; support the assembly to avoid damage
• Wear eye protection when installing or removing roll pins—pins can snap or fly out under force
• If pin is difficult to remove or install, consider using penetrating oil or heating only per OEM guidance

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This start device is the relay that helps the motor begin turning, restoring normal starting performance and preventing no-start or hard-start symptoms. It's a direct-swap electromechanical relay used on compatible appliances. What it does:

• Provides the momentary boost or switching needed to start the motor
• Helps eliminate hard-starting, humming, or intermittent start failures
• Routes current to the motor start winding during startup then disengages
• Works as part of the motor start circuit to protect normal operation

• Disconnect power to the appliance before servicing to avoid electrical shock
• Handle terminals carefully; ensure tight, corrosion-free connections

This overload is a compressor protector that helps prevent motor damage by interrupting power if the compressor draws excessive current or overheats. It's a small, snap-on device that keeps the refrigeration system from running under harmful conditions. What it does:

• Senses excessive current/temperature at the compressor and opens the circuit to stop the compressor
• Helps prevent compressor burnout and extended system damage
• Common symptom fixes: refrigerator not cooling, compressor runs but system won't start, humming or clicking from the compressor area
• Works with the compressor starter system to allow safe restart after a fault clears

• Disconnect power to the appliance before inspecting or replacing the overload
• Typically mounts on or near the compressor terminals; may require gently pulling compressor boot or terminal cover
• Handle carefully to avoid bending terminals; ensure secure terminal connections on installation