Whirlpool Wrf990slam02 Parts

This shaft is the replacement rotating shaft used to support and align the appliance drum or tub, restoring smooth rotation and reducing noise from worn or damaged drive components. What it does:

• Provides a stable mounting point for the drum/tub to rotate smoothly
• Transfers rotational motion and helps maintain drum alignment
• Prevents wobble and uneven wear caused by a damaged shaft
• Commonly replaces a worn or noisy shaft that causes grinding, scraping, or rough drum rotation

• Disconnect power to the appliance before starting any repair
• Some disassembly of the cabinet and drum/tub is required
• Inspect related rollers, bearings, seals and fasteners; replace any worn components to prevent repeat failure
• Use appropriate tools and safety gear

The Pan-Drip is an OEM part for Whirlpool refrigerators. It is designed to collect and manage condensation and any water that may drip inside the refrigerator, preventing it from pooling at the bottom of the appliance. This pan measures approximately 20 inches by 16 inches with a 2-inch depth.

Causes of a bad pan-drip can include wear and tear over time, cracks or breaks due to impact, and buildup of dirt or debris that can block proper drainage. When the pan-drip fails, it can lead to water accumulation and potential leaks.

Symptoms of a bad Pan-Drip include:

• Water pooling inside the refrigerator
• Leaks from the bottom of the refrigerator
• Visible cracks or damage to the pan
• Mold or mildew buildup due to improper drainage

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Freezer Drawer Front Cover is an OEM part for Whirlpool side-by-side refrigerators. It forms the outer front panel of the lower freezer drawer, protecting contents from light exposure and external smudges or debris.

Symptoms of a bad freezer drawer front cover include:

• Cracks, chips, or scratches exposing the interior to outside elements
• Gaps that compromise the drawer's sealing and efficiency 
• Discoloration detracting from the integrity of the overall appearance
• Difficulty opening or closing the freezer drawer smoothly

Causes can be general wear and tear over time from repeated usage, cracking from temperature fluctuations, or damage due to accidents like impacts.

This Whirlpool OEM part ensures optimum protection and aesthetics of your freezer space. It is also compatible with some KitchenAid, Maytag, and GE side-by-side models for a seamless replacement that restores your refrigerator's front facade.

This crisper drawer roller guide mounts to the refrigerator shelf/frame and forms the track the drawer's roller rides in. Replacing a worn guide restores smooth, aligned drawer movement and helps prevent the crisper from sticking or coming off track.

• Guides and supports the crisper drawer roller to keep the drawer on its track
• Helps the drawer open and close smoothly and evenly
• Common symptoms of a failed guide: drawer sticks, tilts, wobbles, or pops off track
• Physical damage or wear to the guide can impede drawer travel

• Disconnect power and remove the crisper drawer and shelf/glass for access.
• Locate the damaged guide; release its locking tabs or remove the retaining screw(s).
• Align the new guide in the same orientation and secure it without overtightening.
• Reinstall the shelf and drawer; verify smooth drawer operation.

This rubber grommet cushions and seals a wiring, hose, or shaft opening to help prevent abrasion, reduce vibration, and maintain a snug fit for quieter, safer appliance operation. What it does:

• Protects wiring, hoses, or moving shafts from chafing and wear
• Helps seal openings to limit water, air, or lint intrusion
• Dampens vibration and reduces noise where panels or components meet
• Worn or damaged grommets can cause rubbing sounds, visible wear, loose hoses, or leaks

• Disconnect power (and water if applicable) before beginning any repair
• Push-fit replacement in most applications; a small screwdriver or needle-nose pliers can help with removal or alignment
• Inspect surrounding seals, hoses, and mounting surfaces and replace damaged parts as needed

The Bracket is an OEM component specifically designed for Whirlpool brand refrigerators. This bracket is responsible for securely mounting internal refrigerator shelves and bins within the unit. 

Symptoms of a bad bracket can include sagging shelves, difficulty accessing bins, contents spilling or shifting during the opening and closing of the refrigerator door, and excess noise or rattling during compressor operation. 

Causes of a bad bracket include deterioration of mounting hardware over time, cracks or breaks in plastic mounting clips, and loose or faulty assembly.

Symptoms of a bad bracket include:

• Sagging or unsecured shelves   
• Bins that do not stay firmly in place
• Contents spilling out of bins  
• Excess noise and rattling from inside refrigerator

Note: Right side

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is a replacement mounting plate that secures and supports internal components for proper alignment and stable operation. Restores structural support and helps maintain correct positioning of nearby parts. What it does:

• Provides a stable mounting surface for adjacent components to prevent movement or vibration
• Keeps parts aligned so mechanisms operate smoothly and reliably
• Replaces a damaged, bent, or corroded plate that can cause rattling or misalignment
• Helps maintain proper spacing to protect wiring and connectors from contact or wear

• Disconnect power before beginning any repair to avoid shock or injury
• Installation typically requires basic hand tools; handle edges carefully
• Inspect nearby fasteners, clips, and gaskets and replace if damaged

This door bumper cushions the door against the frame to prevent metal-to-metal contact. Replacing a worn or missing bumper restores smooth, quieter closing and helps protect surfaces from chips, scuffs, and vibration.

• Absorbs impact where the door meets the cabinet/frame
• Reduces slamming noise and vibration during closing
• Helps protect paint, glass, and trim from wear
• Typical symptoms: missing/cracked bumper, loud clunk when closing, marks on frame, rattling

• Disconnect power and, if applicable, shut off gas/water; allow hot surfaces to cool
• Open the door to access the bumper location
• Remove the worn bumper and clean the contact area for proper seating
• Install the new bumper fully seated and aligned; test door operation

The Valve is an OEM component specifically designed for Whirlpool refrigerators. It regulates the flow of refrigerant through the cooling system.

Causes of a faulty valve can include mineral buildup or debris obstructing flow over many years of use. Internal seals may deteriorate with exposure to refrigerants.

Symptoms of a bad valve include:  

• Increased buzzing or vibrating noises from the refrigeration unit  
• Fluctuating temperatures with foods not staying consistently fresh
• Advanced warming inside refrigerator without cause

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This gasket seals the ice compartment door to help maintain proper cold temperatures and reduce frost or moisture buildup inside the ice storage area. A worn seal can let warm air in and harm ice quality. What it does:

• Seals the ice compartment door to help keep ice cold and dry
• Helps reduce frost buildup and excess condensation inside the compartment
• Can improve cooling consistency and reduce strain on the refrigerator
• Common symptom fix: visible gaps, torn or compressed seal, frost or melting in the ice area

• One ice compartment door gasket

• Clean the door surface and channel before installing to ensure a proper seal
• Press the gasket into the door channel evenly, working around the perimeter for a uniform fit
• If needed, loosen or remove the door per the manufacturer's instructions for easier access
• Avoid sharp tools that could damage the gasket; check the seal after installation and allow time for it to fully seat

This water tube directs water from the dispenser/water system to the appliance's internal components, restoring proper water flow and preventing leaks when the original tube is cracked or clogged. Durable replacement for wet or restricted lines. What it does:

• Routes water from the inlet/valve to the dispenser, icemaker, or internal plumbing.
• Replaces cracked, split, or collapsed tubing that can cause leaks or reduced water flow.
• Helps stop visible pooling or dripping under the cabinet or inside the fresh food section.
• Restores normal water delivery to the dispenser or icemaker when the original tube is obstructed or damaged.

• Disconnect power and shut off the water supply before beginning any repair.
• Inspect fittings and seals; replace any worn gaskets or clamps to ensure a leak-free connection.
• Tighten fittings by hand first, then snug with an appropriate tool—avoid overtightening plastic fittings.
• Test the system at low pressure after installation and check carefully for leaks before restoring full operation.

This front crisper drawer support secures the refrigerator's front crisper drawer for smooth sliding and correct alignment, reducing sagging and sticking so stored items stay accessible and the drawer operates reliably. What it does:

• Holds the front corner of the crisper drawer in place so the drawer slides and aligns properly.
• Prevents drawer sagging, catching, or uneven movement that can make the drawer hard to open or close.
• Helps maintain proper drawer positioning to protect stored produce and prevent rubbing on the cabinet.
• Works with the existing drawer track and rear support.

• Unplug the appliance or disconnect power before starting any service to reduce electrical risk.
• Empty and remove the crisper drawer before replacing the support; follow the refrigerator's parts diagram for correct orientation.
• Inspect the drawer track and rear support for wear; replace any damaged components to restore smooth operation.

Replacement drum support roller that helps the dryer drum rotate smoothly and quietly. Installs where the drum rests to reduce noise and uneven rotation caused by worn or damaged rollers. What it does:

• Supports and guides the tumble/drum as it spins to maintain proper alignment.
• Reduces squeaks, rumbling, and scraping noises from worn or seized rollers.
• Prevents excessive belt wear and uneven drum movement that can lead to vibration.
• Restores smoother rotation when original rollers are cracked, worn, or binding.

• Disconnect power (and gas, if applicable) before beginning any repair.
• Access the roller by removing the dryer access panel or drum per your model's service instructions; support the drum to prevent it from falling.
• Inspect adjacent parts (idler, rollers, shaft, and belt) and replace if worn to avoid repeated failures.