Whirlpool Wrs325dab02 Parts

This bottom hinge plate mounts at the base of the refrigerator cabinet to anchor the lower door hinge. Replacing a worn or bent plate restores smooth door swing and a reliable seal for consistent cooling performance.

• Anchors the lower door hinge to the cabinet frame
• Supports door weight and helps maintain proper alignment
• Promotes smooth door operation and consistent gasket contact
• If bent or worn, can cause door sagging, rubbing, or poor sealing

• Disconnect power; turn off water supply if applicable
• Support or remove the door before loosening hinge fasteners
• Reuse existing screws/hinge components; install the plate flush and tighten securely
• Adjust hinge as needed

Screw: 8-16 x 3/8 inch.

Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.

This replacement blade is the rotating element used within the appliance assembly to deliver the intended action. Installing a new blade restores smooth, efficient operation when the original is cracked, bent, worn, or missing.

• Provides the mechanical action required by the assembly (rotation/agitation)
• Helps maintain consistent performance and smooth operation
• Common failure signs: rattling or scraping noises, vibration/wobble
• Other symptoms: reduced performance in that section of the appliance, visible chips, cracks, or deformation

• Disconnect power before servicing; turn off water supply if applicable
• Wear cut-resistant gloves; edges may be sharp
• Note the original blade's orientation and spacing before removal; install the new blade the same way
• Hand-rotate after installation to ensure free movement and clearance before restoring power

This door hinge mounts at the bottom of the freezer door, supporting its weight and providing the pivot point for smooth operation. Replacing a worn hinge restores proper alignment and sealing to help prevent frost and temperature issues.

• Supports the freezer door at the lower pivot for smooth opening and closing
• Helps maintain door alignment so the gasket seals correctly
• Wear can lead to sagging, rubbing, or gaps along the hinge side
• Helps resolve poor sealing, frost buildup, or the door popping back open

• Disconnect power and remove the base grille before servicing
• Support the door to prevent dropping; mark hinge position for easier realignment
• Remove hinge screws; transfer any shims/spacers from the old hinge to the new one
• Reinstall, tighten fasteners, and check door swing and gasket contact; adjust as needed

The adjustable hinge and cam assembly is an OEM part for Whirlpool refrigerators. It provides stability and smooth movement during opening and closing of the door. The hinge and cam assembly allows for easy access to the refrigerator compartment while maintaining a secure seal to keep your food fresh.

A bad hinge and cam assembly can occur due to regular wear and tear, accidental impact, or a malfunctioning cam mechanism. If you notice symptoms such as the door not closing properly, sagging or misaligned door, or difficulty in opening or closing the door, it may be time to replace this part.

Symptoms of a bad hinge and cam assembly include:

• Door not closing properly
• Sagging or misaligned door
• Difficulty in opening or closing the door

Restore your Whirlpool refrigerator door by replacing the worn or damaged bottom door hinge and cam with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This thermostat retainer clip secures the defrost thermostat to the evaporator tubing in your refrigerator or freezer, maintaining firm contact for accurate temperature sensing and dependable defrost operation.

• Holds the thermostat firmly against the evaporator line for proper temperature feedback
• Helps prevent a loose or dangling thermostat that contribute to frost buildup and poor defrost performance
• Restores correct mounting when the original clip is cracked, bent, or missing
• Common signs include a broken clip or a thermostat not attached to the coil

• Disconnect power to the appliance before servicing; wear cut-resistant gloves
• Access the evaporator compartment; remove accumulated frost/ice as needed without prying on coil fins
• Position the thermostat body flat against the tubing and snap the retainer over it, avoiding pinched wires or damaged fins
• Confirm a secure fit and proper wire routing before reassembling and restoring power

Made by Whirlpool. This kit includes 15 feet of copper tubing, saddle valve, teflon tape, and tubing connector. Use this kit to connect your refrigerator ice maker to water supply (usually your water shut off valve under the kitchen sink).

This factory screw secures appliance components, panels, and brackets. Replace a missing, stripped, or corroded fastener to restore a snug fit, reduce rattles and vibration, and keep assemblies properly aligned.

• Secures panels, brackets, and internal components in place
• Helps maintain correct alignment and clearances
• Replaces damaged, rusted, or missing screws
• Can help reduce rattling, vibration, or loose-fitting parts

• Disconnect power and shut off water/gas before servicing
• Match this screw to the original location; replace like-for-like
• Start threads by hand and use the correct driver to avoid cross-threading
• Tighten snugly; do not overtighten, especially into plastic or thin sheet metal

This wire shelf restores usable storage in the refrigerator, giving sturdy support for food containers and improving interior organization. It replaces a bent, rusted, or missing shelf to help your fridge function like new. What it does:

• Provides a stable, ventilated surface for storing items in the fridge
• Replaces damaged or sagging shelves that cause uneven storage
• Helps maintain airflow for consistent cooling across compartments
• Fits into existing shelf tracks or supports to restore original layout

• Install by sliding the shelf into the existing side supports or clips until fully seated
• No special tools typically required; have a second person assist with larger shelves
• Keep hands clear of sharp wire ends; wear gloves if needed
• If supports or clips are damaged, replace them before installing the shelf

This outer cabinet housing provides structural support and protection for internal components, helping maintain panel alignment and prevent damage from dust, moisture, or impact — replace a damaged housing to restore fit and protection. What it does:

• Supports and secures internal parts and exterior panels to keep components properly aligned.
• Protects wiring, controls and mechanical parts from dust, moisture and accidental contact.
• Helps reduce vibration and rattling by maintaining proper cabinet fit.
• Commonly replaced when the housing is cracked, warped, rusted or no longer secures internal components.

• Disconnect the appliance from power (and water supply if applicable) before beginning any work.
• Remove access panels and fasteners; support the assembly during removal to avoid damage to attached parts.
• Inspect and replace any worn gaskets, clips or fasteners; reuse parts only if undamaged.

The Fan Blade is an OEM part for Whirlpool refrigerators. It helps cool down the condenser coils by drawing air over them, providing cooling and temperature regulation inside the refrigerator.

A bad fan blade can be caused by wear and tear, damage from debris or foreign objects, or motor malfunctions. If you notice issues such as poor cooling performance, unusual noises coming from the refrigerator, or the fan not spinning properly, it may indicate a problem with the fan blade.

Symptoms of a bad fan blade include:

• Inadequate cooling or temperature fluctuations 
• Unusual noises coming from the refrigerator
• The fan not spinning or spinning slowly

Replace your faulty fan blade with this genuine OEM part to restore your refrigerator. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

A replacement cam door that supports the appliance door on its hinge and helps restore proper alignment and latch engagement so the door closes securely and the unit operates normally. What it does:

• Guides and supports the door at the hinge to maintain correct alignment and rotation.
• Engages with the door strike so the door closes and latches reliably.
• Worn or broken cams can cause the door to sag, rub, sit loose, or fail to latch.
• A faulty door cam may prevent the appliance from sealing or engaging the door switch.

• Disconnect power (and gas if applicable) before beginning any repair.
• Access typically requires removing the door or front access panel; basic hand tools are usually sufficient.
• Inspect the hinge, strike, and surrounding plastic for wear when replacing the cam.

This replacement ice door seals and covers the ice chute on the freezer door so the dispenser works properly and cold air stays inside the freezer. It helps restore normal dispensing and keeps the ice compartment protected from warm air. What it does:

• Covers the ice chute and seals the dispenser opening to help maintain freezer temperature
• Opens and closes with each dispense to control ice flow and prevent warm air entry
• Helps prevent ice clumping or melting near the dispenser area
• Commonly replaced when the door is cracked, warped, stuck, or does not close properly

• Disconnect power to the appliance before beginning any repair
• Remove the ice bin/door trim as instructed by your model's service instructions to access the door
• Handle plastic parts carefully to avoid cracking; align mounting tabs before fastening
• After installation, test the dispenser to ensure the door opens and closes smoothly

Size; 8-18 x 1/2 inch.

This white exterior grille restores the appliance's front appearance and protects internal components while allowing airflow. It's a direct-fit cosmetic/vent cover that keeps the front looking finished and helps prevent debris entry. What it does:

• Covers and protects the appliance's front opening or vent area while maintaining airflow
• Restores a clean, finished look to the appliance exterior
• Helps keep lint, dust and large debris from entering internal components
• Reduces visible gaps or damage from a worn or broken front trim

• Disconnect power to the appliance before attempting service
• Handle with care to avoid scratching the grille finish during installation
• Use the OEM mounting hardware and follow the appliance manufacturer's instructions