Wm3499hva Parts

Connector hose joins an appliance water line to internal plumbing, providing a sealed path for water. Replacing a damaged connector stops leaks and restores reliable water delivery to dispensers and ice makers.

• Joins and seals the appliance water line to the unit, preventing leaks and ensuring proper flow.
• Replace when you notice dripping, pooling under the appliance, or reduced water/ice production.
• Fits factory connection points for a secure, leak-resistant seal.
• Works with existing clamps and O-rings when those components are serviceable.

• Shut off the water supply and disconnect power before removing the old connector.
• Relieve water pressure by running the dispenser or dispensing water before disconnecting lines.
• Inspect and replace worn clamps or O-rings; hand-tighten fittings, then turn the water on slowly and check for leaks.

This balance weight is the washer drum counterweight that helps stabilize the tub during spin cycles to reduce vibration and excessive movement. It restores smoother, quieter operation when the drum is unbalanced. What it does:

• Counters the rotating drum to reduce vibration, shaking and banging during spin
• Helps maintain drum alignment for consistent spin performance
• Reduces noise caused by an imbalanced load or worn/loose weight
• Prevents excessive movement that can stress suspension components

• Disconnect power and water supply before starting any repair
• Support the tub/outer cabinet to prevent it from shifting when removing old weight
• Retain and reuse original fasteners only if in good condition; replace damaged hardware

This genuine power cord assembly restores safe electrical connection to your appliance by replacing a damaged or worn power lead. Durable wiring and molded connectors help ensure a reliable feed for normal operation. What it does:

• Replaces a faulty or damaged power lead to restore power flow to the appliance
• Provides a secure, molded connection between the appliance and household power
• Can stop symptoms like no power, intermittent power loss, or tripped breakers caused by a compromised cord
• Helps eliminate loose or exposed wiring that can cause arcing or electrical smell

• Disconnect appliance from power before inspecting or replacing the cord.
• Match connector orientation and seating; secure strain relief and routing per appliance harness.
• Inspect mounting points and strain relief; do not use if connectors or wiring show damage.

This Main PCB power control board assembly replaces the appliance's primary electronic control module to restore proper power distribution and command signals. It helps recover normal control operation and device responsiveness when the main board is faulty. What it does:

• Manages power distribution and control signals to the appliance's components
• Controls user-interface commands and cycle/function sequencing
• Can stop intermittent power, random resets, or unresponsive controls caused by a failing main board
• Works with the appliance's safety and sensor inputs to coordinate operation

• Disconnect power (unplug or switch off breaker) before removing or installing the board
• Handle the PCB by its edges and avoid static discharge; use an ESD strap if available
• Verify board part number matches the board being replaced before installation

This multi-connector wiring harness routes power and signals between components to restore electrical connections in the appliance. It replaces a damaged or worn harness to help re-establish reliable component communication and operation. What it does:

• Provides multiple pre-terminated connectors to link control boards, sensors, motors or other modules
• Replaces frayed, burned or broken wiring that can cause intermittent operation or component failures
• Restores proper electrical pathways so affected circuits can function normally
• Helps correct symptoms such as no-start, erratic cycles, or loss of specific functions tied to a failed harness

• One multi-connector wiring harness as shown

• Disconnect power before starting any repair to avoid shock or short circuits
• Match connector shapes and wire colors; do not force connectors together
• Inspect mating connectors and terminals for damage and clean before connecting
• Secure harness to prevent rubbing or pinching during operation

This outer housing case protects internal components and provides the appliance's external structure for reliable operation and a finished appearance. It helps keep parts aligned and shields electronics and mechanisms from debris and damage. What it does:

• Covers and protects internal components from dust and accidental contact
• Keeps internal modules properly positioned and supported
• Restores the appliance's exterior appearance and structural integrity
• Stops rattles or vibrations caused by a damaged or missing panel

• One outer housing case

• Disconnect power and water before beginning any repair
• Handle panel edges carefully to avoid cuts or cosmetic damage
• Use manufacturer-recommended fasteners; do not overtighten screws

This connector nozzle is the small replacement plumbing piece that directs water between internal components, restoring proper spray and flow where a worn or damaged nozzle causes leaks or weak/erratic water delivery. What it does

• Channels water from the supply path to the spray/nozzle outlet to maintain correct flow
• Keeps seals and adjoining fittings aligned to prevent leaks
• Replaces cracked, clogged, or broken nozzle pieces that cause weak spray or misdirected water
• Helps stop dripping or continuous flow caused by damaged connector ends

• Connector nozzle

• Disconnect power and water supply before attempting repair
• Handle carefully to avoid damage to mating surfaces and seals; replace any worn gaskets
• Basic hand tools typically required; follow your appliance's service manual for disassembly and torque guidance

This outer tub assembly is the main watertight housing that supports the washer drum and contains wash water. Replacing a damaged outer tub restores the washer's ability to hold water and properly support the rotating drum. What it does

• Holds and seals wash water inside the washer to prevent leaks.
• Supports the inner drum and bearings for smooth rotation.
• Helps maintain correct alignment between the drum and motor/drive components.
• Often replaced when cracks, distortion, or corrosion cause leaks or unusual noise.

• One outer tub assembly.

• Disconnect power and water supply before beginning service.
• Replacing the outer tub typically requires removing panels, the inner drum, and drive components; have the correct tools and a service manual for your model.
• Inspect and replace related seals, gaskets, bearings, and fasteners as needed.

This rear tub spider is the cast support that secures the washer drum to the drive shaft and keeps the drum centered during spin cycles. It restores drum stability and helps stop excessive wobble and noise. What it does:

• Supports and centers the outer/inner wash drum on the drive shaft
• Transfers motor torque to the drum so the tub can spin properly
• A worn or cracked spider can cause loud vibration, grinding noises, or a drum that wobbles or rubs
• Replacing a corroded or broken spider prevents further damage to the tub and drive components

• One rear drum spider assembly

• Disconnect power and water before beginning; this repair requires disassembly of the washer cabinet and drum
• Inspect bearings, seals, and fasteners while the tub is apart — these parts are often serviced at the same time
• Use appropriate tools and follow OEM torque specs for reassembly
• Do not operate the washer with a damaged spider — it can cause further component failure

This inlet hose supplies water from the household shutoff to the washer, restoring a secure, leak-free connection for normal fill cycles. It fits the washer's water inlet and keeps supply flowing as designed. What it does:

• Connects the home water supply to the washer's inlet valve to allow normal fill
• Replaces cracked, brittle, or leaking supply hose that causes drips or visible leaks
• Helps resolve slow or no-fill symptoms when the hose is obstructed or damaged
• Restores a sealed connection to prevent water damage around the appliance

• One inlet hose

• Turn off water and power to the appliance before starting work
• Inspect and reuse or replace any rubber gaskets or clips as needed; tighten connections by hand and finish with a wrench—don't overtighten
• Check all connections for leaks after restoring water and run a short fill cycle