Wm3700hra Parts

This tub assembly is the inner drum component for compatible front-load washers, providing the rotating basket that holds laundry during wash cycles for effective tumbling and water drainage. What it does

• Replaces the washer's inner drum that holds and tumbles clothes during wash and spin cycles.
• Restores proper rotation to reduce rubbing, grinding, or noisy operation caused by a damaged drum.
• Helps ensure proper water drainage and balanced spinning when the drum is intact and centered.
• Can resolve symptoms like loud thumping, scraping noises, or clothes catching on a damaged drum surface.

• Disconnect power and water supply before beginning any repair.
• Drum assemblies are heavy — get a helper and use proper lifting technique.
• Installation typically requires removing the washer cabinet and drive components; follow the OEM service manual or a step-by-step guide.

A replacement holder assembly that secures and supports internal components for proper alignment and operation. Restores stable mounting where the original bracket is cracked, bent, or broken so the appliance runs quietly and reliably. What it does

• Provides a secure mounting point for internal parts that rely on a fixed support
• Prevents rubbing, misalignment, and excess vibration caused by a damaged holder
• Helps restore correct component positioning to improve part interaction and operation
• Commonly used when the original bracket is cracked, worn, or no longer holds parts firmly

• One holder assembly

• Disconnect power before starting any repair; shut off water supply if the repair requires opening plumbing
• Basic hand tools typically required; handle clips and tabs gently to avoid damage
• Inspect adjacent components for wear and replace if needed for a long-lasting repair

This PCB assembly is the appliance's main electronic control board. It replaces a damaged or faulty control board to restore programmed cycles and electronic functions for models that use this OEM part number. What it does:

• Controls user interface inputs, cycle selection, and machine operation logic
• Manages power delivery to valves, motors, and sensors through relay and driver circuits
• Detects and responds to sensor signals to coordinate wash/dry/heating sequences
• Can stop or err if the board fails, causing no power, unresponsive controls, or erroneous error codes

• Disconnect power and water before beginning any repair
• Take photos or label wiring before disconnecting harnesses to ensure correct reassembly
• Handle the board by the edges and avoid static discharge; use an anti-static wrist strap if available

This door boot gasket forms the flexible seal between the outer tub and cabinet opening on a front-load washer to keep wash water contained. Replace a torn or moldy boot to stop leaks and lingering odors.

• Creates a watertight seal between the outer tub and the door opening
• Flexes with drum movement to maintain a reliable barrier during wash and spin
• Helps resolve leaks at the door, visible rips or cracks, water on the floor after a cycle, and musty smells that persist after cleaning

• Unplug the washer and turn off water supply before servicing
• Remove the front panel as needed; note the boot's orientation before removal
• Clean mounting grooves; seat the new boot evenly all the way around and secure clamps firmly
• Run a quick cycle to check for leaks after reassembly

The Pump Assembly is an OEM part for LG washing machines. It plays an important role in moving water into and out of the washer tub during operation cycles. 

Causes of pump assembly failure generally stem from normal wear and tear on internal components over time. Mineral buildup from hard water or sediment can also clog critical areas.

Symptoms of a bad pump assembly include:

• Incomplete or slow filling/draining of water 
• Strange noises emanating from within the washer tub
• Error codes related to water level or drainage issues
• Reduced washing or rinsing performance

This LG OEM replacement part is also compatible with some Kenmore models. 

This clamp assembly secures the washer's door boot (gasket) in its groove to maintain a watertight seal at the front of the tub. Replace a stretched, bent, or broken ring to stop leaks and keep the boot properly seated.

• Holds the door boot/gasket firmly to prevent front-panel water leaks
• Restores proper tension when the original ring is deformed or the spring fails
• Common symptoms: water leaking at the front, boot slipping off, visible broken or missing clamp
• Often replaced during door boot service to ensure an even, reliable seal

• Disconnect power and turn off water supply before servicing
• Carefully relieve tension and remove the old clamp without tearing the boot
• Install the new clamp evenly around the opening
• Run a short test cycle and check for leaks after reassembly

This factory bolt assembly is a hardware fastener used to secure designated components within the appliance. Replacing a worn or missing bolt restores a tight, stable connection to help reduce vibration and noise while keeping parts properly aligned. What it does:

• Secures a component to its bracket, frame, or base
• Maintains alignment and stability of the assembly
• Helps minimize vibration and rattling when tightened correctly
• Common symptoms: missing or stripped bolt, loose connection, unusual vibration/noise, visible damage to the bolt head or threads

• Disconnect power and, if applicable, shut off water supply before servicing
• Support the component being fastened to prevent strain while removing/installing the bolt
• Start threads by hand to avoid cross-threading; tighten snugly per OEM guidance—do not overtighten
• Reinstall any washers, sleeves, or grommets in the original order if present

The Stator Assembly is an OEM part for LG washing machines. The stator assembly acts as the stationary component of the motor that drives the wash drum and basket. It converts alternating current into mechanical motion through electromagnetic induction, working together with the rotor to power the motor.

Causes of a bad stator assembly can include defects in the windings, bearing wear, or damage due to excessive heat.

Symptoms of a bad stator assembly include:

• The motor failing to start or run
• Abnormal noises coming from the transmission
• Vibration or shaking issues
• Inability to advance cycles

This OEM LG part is also compatible with some Kenmore models.

The LG Washer Door Hinge Assembly is an OEM component specially designed for LG brand laundry machines. This assembly includes the front-loading door hinges that allow the washer door to securely open and close.

Symptoms of a bad hinge assembly include:

• A door that falls off entirely or does not stay attached 
• Squeaks, squeals, or grinding noises coming from hinges
• Restricted or difficult door-swinging movement
• Detached or failing hinge pins allow the door to sag

Causes of a bad hinge assembly can include wear and tear from years of constant door swinging motions, corrosion buildup interfering with smooth operation, or damage from excessive weight loads improperly handled.

The PCB Assembly, Display is an OEM part specifically designed for LG front-load washers. It controls the washer's user interface including digital readouts, cycle/option buttons, and fault/status displays.

Causes of a bad PCB Assembly, Display would be damaged from water damage when cycling, long-term component degradation, or shocks exceeding durability. Moving parts concentrate stress that electronic paths must withstand. 

Symptoms of a bad PCB Assembly, Display include:

• Unresponsive or "glitchy" controls like stuck buttons  
• Garbled or missing characters on the screen
• Inability to change settings or view cycle status
• Frequent error codes obscuring instructions

Replacing with this genuine LG board resurrects full interactivity for customers. Clear guidance simplifies use while smart notifications maintain machine wellness. This LG part fits Sears/Kenmore washers as well.

The NOISE FILTER ASSEMBLY is an OEM part for LG washing machines. It is a component designed to minimize vibrations and reduce noise emanating from the washer during operation. Proper noise damping is important for smooth functionality without disturbance.

Causes of a bad noise filter assembly can include cracks or tears developing over extended use. Physical damage from impact could also compromise its noise-blocking abilities. 

Symptoms of a bad noise filter assembly include:

• Loud banging or clanking noises during wash and spin cycles
• Excessive vibrations felt through the washer cabinetry 
• Increased stress on other components from inadequate dampening
• Premature wear of suspension components like legs and runners

Replace yours today with this genuine OEM LG part to restore a quiet wash experience. This replacement assembly ensures optimum vibration control. It is also compatible with Sears/Kenmore models.

This wiring harness connects the appliance's control or component circuits to restore reliable electrical connections and proper function. It replaces a damaged or worn harness to stop intermittent power, control errors, or non-working components. What it does:

• Carries electrical signals between the control board and sensors/components.
• Replaces frayed, burnt, or broken wires that cause intermittent operation or component failure.
• Helps resolve control board communication errors or circuits that won't power.
• Restores secure plug-and-play connections when original connector ends are damaged.

• One wiring harness, single

• Disconnect power (unplug or turn off breaker) before starting any repair.
• Route wires along existing clips and channels; avoid sharp edges and hot surfaces.

The washer Hose Retainer Holder Clip is an OEM part that mounts behind the control panel on LG front-loading washers. It positions water supply hoses to prevent kinks or stress that leads to leaks over time. 

Causes of a failed clip include fatigue from years of front-load vibration and damage from any installation or repair work behind the control panel.

Symptoms of an insufficient hose retainer clip include:

• Loose, misrouted, or flopping hoses behind the control panel
• Bulging or kinked hoses that restrict water flow
• Water leaks at hose connections

This OEM replacement clip is compatible with select Kenmore front-loaders.