Wrf560seywoo Parts

Size: 3/4 inch.

Color: Black

This replacement access cover restores the appliance's exterior finish and helps protect internal components from dirt and accidental contact. Simple, direct-fit design for restoring safety and appearance after damage or removal. What it does

• Shields internal components and wiring from dust, debris, and accidental contact.
• Helps stop rattles and vibrations caused by a missing or loose cover.
• Restores the appliance's finished look after repair or maintenance.
• Provides a mounting surface for screws and attaches flush to the cabinet.

• Disconnect power (and water, if applicable) before starting any work.
• Remove any fasteners or trim pieces holding the old cover in place; lift cover straight out to avoid pinching wires.
• Align new cover and secure with the original screws; do not overtighten to avoid cracking the plastic.
• If any clips or mounting tabs are damaged, replace them before reinstallation to ensure a secure fit.

This separator is a molded plastic divider that helps keep ice organized inside the ice bin for smoother dispensing and less clumping. It restores proper spacing so ice moves freely during dispense cycles. What it does:

• Divides and guides ice inside the ice bin to reduce jamming and clumping
• Helps improve ice feed into the auger or dispenser chute
• Reduces shifting and rattling of ice during door movement
• Restores intended bin geometry after a cracked or missing divider

• One separator

• Unplug the refrigerator or shut off power before working on the ice bin or dispenser
• Empty the ice bin and remove any loose ice to avoid spills during replacement
• Snap the separator into the molded slots in the ice bin; no tools typically required

This bale strap is a direct-replacement part that helps secure the dryer's latch/bale assembly so the door closes and stays closed during operation. Replacing a worn or broken strap restores reliable door engagement and safer drying cycles. What it does:

• Anchors the dryer door's latch/bale so the door remains properly closed during operation
• Prevents intermittent door opening that can stop cycles or cause heat loss
• Replaces a stretched, torn, or broken strap that no longer holds the latch securely
• Works with the door/latch mechanism to maintain safe operation during drying

• One bale strap

• Disconnect power before beginning any repair to avoid electrical shock
• Verify strap routing and attachment points match the original before reinstalling
• Basic hand tools are typically required; avoid forcing plastic clips to prevent breakage

Size: 1/4 lb.

Size: 1/4 inch.

This name plate is the decorative centennial badge that restores the appliance's exterior appearance and branding. It replaces a missing, damaged, or faded badge to keep the unit looking factory-finished. What it does

• Restores the appliance's exterior badge for a like-new appearance
• Replaces badges that are cracked, scratched, peeling, or discolored
• Helps identify the appliance style when the original emblem is missing
• Cosmetic part only — does not affect appliance operation

• One name plate

• For best results, clean the mounting area and remove dirt or wax before installation
• Handle carefully to avoid scratching the finish; use non-marring tools as needed
• If access behind trim is required, unplug the appliance or disconnect power before removing panels
• Follow OEM instructions for removal and reinstallation to avoid damaging clips or surrounding trim

The ice maker bracket is an OEM part for Whirlpool refrigerators. This bracket is a structural component that holds and supports the icemaker assembly within the refrigerator. It allows for secure mounting and installation of the icemaker while also maintaining proper alignment.

Causes of a bad bracket can include wear and tear over time, cracks or breaks due to impact or stress, or corrosion issues that compromise the integrity of the mounting structure.

Symptoms of a bad bracket include:

• Loose or unstable icemaker installation
• Improper ice production or dispensing
• Noise or vibrations emanating from the icemaker area
• Moisture leaks or water damage near the bracket mounting points

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This refrigerator door shelf bin is the shallow-style rack that mounts to the inner door liner to hold smaller items. Replace a cracked or missing bin to restore secure, organized storage and keep condiments and jars from tipping.

• Holds and organizes smaller items on the refrigerator door
• Replaces bins that are cracked, broken, loose, or fall off the door
• Helps reduce spills and tipping when opening/closing the door
• Designed for the shallow bin positions on applicable models

• Lift the old bin up and out; align the new bin's hooks with the door rails and press down until fully seated
• Do not force onto the wrong mounting rails—shallow and deep bins may mount in different positions
• Handle plastic carefully; avoid installing when very cold to reduce risk of cracking

Restore safe, usable storage space with this 2/3-width refrigerator glass shelf. It provides a strong, easy-to-clean surface in the designated flip-style shelf position when the original shelf is cracked, missing, or won't seat securely.

• Provides a level, durable surface in the 2/3-width shelf location
• Works with the flip-style position to help accommodate taller items when configured
• Restores lost storage area and proper support for everyday items
• Typical symptoms: cracked/chipped glass, broken frame tabs, shelf won't stay in place, missing shelf

• Handle tempered glass carefully; wear cut-resistant gloves
• Allow shelf to reach room temperature before washing to avoid thermal shock; clean with mild soap
• Engage rear hooks/tabs in the cabinet slots, then lower the front into the supports; confirm both sides are fully seated
• Transfer any trim from the original shelf if applicable

This is a refrigerator cantilever shelf with a flip-up front section. It provides adjustable storage and lets you temporarily raise the front portion to fit tall items without removing the shelf.

• Supports food and containers on the fresh food shelf rails
• Front section flips up to create extra vertical clearance
• Helps restore proper organization if the original shelf is cracked or missing
• Common symptoms: broken frame, missing or loose shelf, reduced storage flexibility

• Unplug the refrigerator before servicing
• Remove food items; lift the shelf slightly and pull forward to disengage from the side rails
• Align replacement on the rails and slide fully into place
• Handle glass components carefully to avoid injury or damage

This cup fill spout directs the dispenser's water stream cleanly into a cup. If the spout is cracked, clogged, or warped, it can cause splashing or persistent drips—replacing it restores a steady, controlled flow.

• Funnels water from the dispenser outlet for a smooth, targeted stream
• Helps reduce splashing and water running down the door
• Can resolve drips after dispensing, erratic spray, or a damaged/missing spout
• Visible cracks, mineral buildup, or deformation are common failure signs

• Unplug the appliance and turn off the water supply
• Open the dispenser area and release the spout from its locking tabs or clips
• Seat the new spout fully; transfer any seals from the old part if applicable
• Restore water and power, then test for proper flow and leaks