Wrt311fzdb02 Parts

This temperature-sensitive switch controls the automatic defrost cycle. It opens to shut off the defrost heater when the evaporator warms to a safe level, protecting components and helping your refrigerator maintain consistent, frost-free cooling. What it does:

• Senses evaporator coil temperature during the defrost cycle
• Opens to cut power to the defrost heater at its calibrated limit; recloses when the coil cools
• Helps prevent overheating and supports proper automatic defrost operation
• Typical symptoms include heavy frost on the evaporator/freezer, poor cooling or a warm fresh-food section, the unit running constantly, or the defrost heater not cycling

• 1 thermostat

• Disconnect power to the appliance before servicing
• Allow the evaporator area to thaw and dry; handle wiring/connectors with care
• Mount the thermostat in the same location/orientation as the original; transfer/reuse any mounting clip or insulation
• Make secure electrical connections and route wires away from the heater; restore power and monitor a full cooling/defrost cycle

This filler wrapper corner is a small trim piece that restores the finished edge and alignment where two panels meet, helping keep the appliance looking finished and reducing gaps or rubbing between surfaces. What it does

• Covers and finishes the outer corner where filler/trim panels meet for a clean appearance
• Helps maintain panel alignment and keeps adjacent parts from rubbing or catching
• Reduces visible gaps that can collect dirt or moisture
• Commonly replaced when corner trim is cracked, broken, or missing

• One filler wrapper corner

• Disconnect power to the appliance before beginning any repair
• Handle trim pieces gently to avoid cracking; pry or loosen adjacent trim panels as needed
• May require removing outer panels or adjacent trim fasteners for access
• Work slowly and use non-marring tools to avoid damaging surrounding finishes

This small hinge cover caps and secures the appliance lid/cover hinge, restoring proper alignment and preventing wear on the hinge joint for smoother opening and closing. What it does:

• Protects the hinge pivot and keeps the cover seated correctly
• Helps prevent looseness, wobble, or misalignment of the lid/cover
• Reduces metal-on-metal wear and guards against rubbing or rattling noises
• Restores normal lid movement when the original hinge cover is cracked, missing, or worn

• Disconnect power to the appliance before starting any work
• Remove any screws or trim panels that block access to the hinge; keep fasteners for reassembly
• Handle plastic components carefully to avoid cracking; align before tightening
• If other hinge hardware is damaged or loose, inspect and replace as needed for a complete repair

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This genuine wire shelf replaces a damaged or missing interior refrigerator shelf to restore storage and airflow. It provides stable support for food and containers and matches factory fit and finish. What it does

• Replaces a broken, bent or missing refrigerator wire shelf so items sit securely.
• Restores correct shelving layout to maintain even airflow and cooling.
• Prevents items from falling through damaged shelving and keeps food organized.
• Fits into existing shelf rails or supports for a factory-style fit.

• Remove all food and unplug the refrigerator or turn off power to the appliance before starting.
• Slide shelf into existing rails or seat onto shelf supports; no special tools typically required.
• Wear gloves to avoid sharp wire edges during handling.
• If shelf does not seat easily, verify support clips or rails are correctly positioned and undamaged.

This front trim grille restores the appliance's lower/front appearance and helps protect internal components from dust and debris. It replaces a cracked, broken, or missing grille to improve looks and allow proper airflow. What it does

• Covers and protects the appliance's front/lower opening and internal components
• Keeps dirt and debris from entering the cabinet area
• Restores a neat, finished appearance after damage or wear
• Helps maintain proper airflow through the front vent area

• Disconnect power to the appliance before beginning any work
• Typically installs by aligning tabs and snapping or fastening into place; may require a screwdriver
• Handle carefully to avoid scratching the finished surfaces during installation
• If mounting hardware is broken or missing, replace with manufacturer-recommended fasteners

A replacement shelf trim that restores the front edge of a refrigerator shelf for a clean look and helps keep items from sliding forward. Easy cosmetic fix that renews shelf function without replacing the entire shelf. What it does:

• Replaces a cracked, chipped, warped, or missing front shelf trim to prevent items from slipping off the shelf edge
• Restores a finished appearance to the shelf front and helps retain small items
• Snaps into the shelf edge or bracket to secure the glass shelf in place
• Helps eliminate rattling or shifting caused by damaged trim

• One shelf trim

• Remove refrigerated items and slide or lift the shelf out per your owner's manual before replacing trim
• Handle glass shelf carefully; support it on a flat surface during installation
• Align trim clips with the shelf edge and press until it snaps into place
• No electrical disconnection required; follow OEM instructions for safe handling

This shelf trim is a replacement trim piece that restores the front edge/finish of a refrigerator door shelf, keeping items secure and improving appearance. It snaps into the shelf to cover and protect the exposed edge. What it does:

• Replaces a cracked, chipped, or missing front shelf edge to prevent items from sliding out
• Restores a flush, finished look to a refrigerator door shelf
• Helps maintain proper containment of bottles and smaller items on the door
• Fits into the shelf channel and holds the shelf liner edge in place

• Remove the door shelf or bin per the refrigerator manual before replacing the trim
• Align the trim with the shelf channel and press firmly until it snaps into place
• Do not force parts; inspect clips or mounting features for damage and replace shelf if necessary
• Disconnect power or follow manufacturer safety guidance if working near electrical components

This clear outer control cover protects and finishes the appliance's user control area while keeping buttons and displays visible. It restores a clean, finished look and shields controls from spills, dust, and everyday wear. What it does:

• Protects the appliance control panel from spills, dust, and light impact
• Keeps buttons and display readable while preventing direct contact and grime buildup
• Replaces cracked, fogged, or missing covers that can trap debris or expose internal components
• Helps maintain a finished appearance and smooth button operation

• One clear outer control cover

• Disconnect power before starting any repair to avoid shock or injury
• Typically removed/replaced from the front/control panel—may require removing a trim or screws
• Handle carefully to avoid scratching or cracking the clear plastic during installation

A small retainer clip that secures panels, hoses or wiring to keep components in place and reduce noise from loose parts. Replacing a worn or broken clip restores proper fit and helps prevent intermittent contact or rattling. What it does

• Secures trim, panels, hoses or wire harnesses to mounting points to prevent movement.
• Keeps components aligned so switches and seals engage correctly.
• Stops rattling or vibrating noises caused by loose parts.
• Helps prevent abrasion or chafing of wires and hoses by holding them away from edges.

• Install by snapping or sliding the clip into the factory mounting slot; use needle-nose pliers if needed.
• Power off and unplug the appliance before accessing internal parts.
• Inspect surrounding mounts and mating tabs for damage; replace if worn for a secure fit.
• If removal is difficult, apply a small amount of penetrating lubricant and work carefully to avoid breaking adjacent plastic.