Wtw4855hw2 Parts

This wire shield is a molded protective cover that helps keep wiring routed and protected from heat, abrasion and moving parts. It prevents chafing and reduces the risk of shorts for a safer appliance operation. What it does:

• Covers and routes wiring to protect insulation from heat and friction
• Prevents wires from contacting sharp edges or moving components
• Helps stop intermittent shorts, arcing, or wiring damage that can cause odor or failures
• Maintains proper wire position to support consistent electrical connections

• One wire shield

• Disconnect power to the appliance before beginning any work
• Secure with existing clips or fasteners; do not force or modify the part
• If wiring insulation is melted or damaged, replace wiring/harness before reassembly

This wire harness routes power and control signals between the appliance's electrical components, restoring proper connectivity and operation when the original harness is damaged or faulty. It's a direct-fit electrical assembly designed for straightforward replacement. What it does:

• Provides the main electrical connections between control, power source, and other components
• Replaces damaged, frayed, or burned wiring that can cause intermittent or complete loss of function
• Helps eliminate symptoms like no power to controls, intermittent operation, or blown fuses/trips
• Maintains factory-style connector fit and routing to reduce vibration and wear

• One complete wire harness assembly

• Always disconnect power (unplug or shut off circuit breaker) before inspecting or replacing wiring
• Route harness and secure connectors per the appliance wiring diagram to avoid pinching or heat exposure

This electrical wire harness routes power and control signals between a unit's main controls and its components to restore reliable electrical connections and operation. It replaces a damaged or worn harness to help resolve intermittent or lost function. What it does:

• Carries power and control signals between the control board and components
• Restores lost or intermittent electrical connections
• Helps resolve symptoms like non-working controls, components that don't power on, or intermittent operation
• Protects multiple wires with a bundled routed assembly for correct installation

• Disconnect all power before beginning any repair to avoid shock or injury
• Handle connectors carefully; do not pull on individual wires
• Route and secure the harness to match original routing and strain reliefs
• Refer to your model's service manual or wiring diagram for connector locations and securement points

This cabinet is the main outer housing that supports and protects the appliance's internal components while giving the unit its finished exterior. It restores structural integrity and proper panel alignment for safe, reliable operation. What it does:

• Provides the structural frame and mounting surface for controls, panels, and internal components
• Protects internal parts from dust, moisture, and incidental contact
• Helps maintain proper airflow and component positioning to reduce vibration and noise
• Restores correct panel alignment and closure when the original cabinet is dented, cracked, or corroded

• One cabinet

• Disconnect power (and gas, if applicable) before beginning any repair
• Installing may require removing trim, controls, and internal components; keep fasteners organized
• Use proper lifting technique and a second person for heavy or bulky cabinets to avoid damage or injury

This wire harness is the main electrical connection assembly that links the appliance's control and power components, restoring reliable circuit continuity and proper operation. It replaces damaged or worn wiring to help eliminate intermittent power and control faults. What it does:

• Provides factory-style wiring connections between controls, switches, and power inputs
• Restores proper circuit continuity to address intermittent operation, loss of power, or non-responsive controls
• Ensures secure connector fit to prevent arcing or loose connections
• Matches OEM routing and terminal configurations for correct installation

• Always disconnect power before servicing the appliance to avoid shock or injury
• Compare the harness and connectors to the original part for correct fit before installation
• Route and secure wiring per the appliance wiring diagram; avoid pinching or contact with sharp edges or hot surfaces

The Control Board is an OEM part for Whirlpool washers. It is the 'brain' of the washer containing all the electrical components and circuitry that allow the appliance to function properly.

Causes of a bad control board can include failure due to extended use over time, exposure to water leaks or surges, or manufacturing defects. Modern circuitry must endure years of wash cycles operating motors, heating elements, and other systems.

Symptoms of a bad control board include:

• The washer failing to start or complete cycles  
• Flickering or non-responsive displays/buttons
• Strange sounds or failure of specific systems (fill, wash, spins)
• Troubleshooting lights or error codes appearing

This quality OEM Whirlpool control board replacement ensures smooth coordination of all washer functions. Dependable performance provides lasting value for your laundry room appliance. This part is also compatible with Maytag, Roper, Amana, Jenn-Air, and select Kenmore models.
 

The Inner Tub Ring Assembly is an OEM part for Whirlpool washers. This assembly serves as a protective barrier between the inner tub and the outer tub, providing support and stability during the washing process.

A bad inner tub ring assembly can be caused by damage, wear and tear, or improper installation. If you notice excessive movement or wobbling of the inner tub, water leakage, or unusual noises during the wash cycle, it may indicate a problem with the inner tub ring assembly.

Symptoms of a bad inner tub ring assembly include:

• Excessive movement or wobbling of the inner tub during operation
• Water leakage from the area where the inner tub and outer tub meet
• Unusual noises during the wash cycle
• Visible cracks or damage on the inner tub ring assembly

Replace your faulty inner tub ring assembly with this genuine OEM part to restore your washer. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Washplate is an OEM part for Whirlpool washers. Located inside the washer tub, the washplate works together with the basket to agitate clothes during wash cycles. 

Causes of a bad washplate can include cracks, mineral deposits that clog holes, or excessive wear over time.

Symptoms of a bad washplate include:

• Inefficient or ineffective agitation of clothes
• Long wash times even on light soil levels
• Standing water in the bottom of the tub after spins
• Reduced water pressure during fill cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Lid is an OEM replacement part for Whirlpool washing machines. It is the top cover of the washer that provides access to the interior drum and tub, allowing you to load and unload laundry. The lid is designed to be durable and secure, ensuring safe and proper operation of the washing machine.

Symptoms of a bad Lid include:

• Difficulty opening or closing the lid
• Lid not closing or latching properly
• Visible cracks or damage to the lid material
• Lid becoming detached or falling off

Causes of a bad lid can range from physical damage due to impact or mishandling, to wear and tear over time from repeated use. Exposure to excessive moisture or humidity can also contribute to the degradation of the lid material or mounting mechanisms.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models. 

This factory screw secures appliance panels and components, keeping them properly aligned and quiet during operation. Replace a stripped, corroded, or missing fastener to restore a snug fit and dependable performance in the original mounting location. What it does:

• Fastens brackets, panels, trim, or internal hardware to the cabinet/frame as specified by the manufacturer
• Helps maintain proper alignment and reduce rattling or vibration when a screw is worn or missing
• Direct replacement for damaged, stripped, or rusted hardware
• Used in various locations per the service diagram; match to the original position

• 1 screw

• Disconnect power (and shut off water or gas, if applicable) before servicing.
• Compare length and thread style to the original; install in the same location.
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten.
• Reinstall any brackets or panels in the correct order.

This clamp secures a washer or dryer hose to its connection to prevent leaks and keep the hose firmly in place during operation. It replaces worn or loose clamps that allow water to escape or hoses to detach. What it does:

• Holds a washer/dryer hose to a nipple, collar or fitting to maintain a sealed connection
• Prevents water leaks caused by loose or corroded clamps
• Stops hoses from slipping off during drain or fill cycles
• Restores proper hose retention and reduces risk of water damage

• Disconnect power and turn off the water supply before starting any repair
• Inspect hose and fitting for damage; replace hose if cracked or frayed
• Use appropriate pliers or a screwdriver for the clamp style; avoid overtightening to prevent hose damage
• Verify a leak-free connection after restoring power and water

This rubber pad cushions and protects appliance components from vibration and abrasion, reducing noise and wear. It's a small replacement part that restores proper contact and dampening where original pads have worn or fallen off. What it does

• Cushions panels or components to reduce vibration and rattling
• Prevents direct metal-to-metal contact that can cause scratching or wear
• Helps stabilize parts that have shifted due to a missing or damaged pad
• Commonly replaced when noisy operation or visible pad deterioration occurs

• One replacement pad

• Disconnect power before accessing interior panels or components
• Remove any retaining clips or panels that block the pad's location; pad typically presses into place
• Verify orientation and seating against the mating surface; replace any worn fasteners or retainers
• If adhesive was used on the original, use an OEM-recommended adhesive only.

This genuine replacement screw secures components in compatible Whirlpool appliances, restoring proper fit and preventing rattles or loose panels. Use it when original fasteners are missing, stripped, or damaged. What it does:

• Fastens panels, brackets or small components to maintain structural stability
• Replaces missing or worn screws that cause vibration, rattling, or loose parts
• Restores secure connections after repairs or part replacements
• Helps prevent further damage by keeping parts properly aligned

• Turn off and unplug the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and hand-start the screw to prevent cross-threading
• Keep small parts away from children and pets during installation