Wtw8420 Parts

This nozzle assembly directs fresh water for the refrigerator's fresh-fill function, restoring controlled filling and helping prevent leaks and drips. Replace a damaged nozzle to restore reliable water dispensing. What it does:

• Directs and meters fresh water flow during the refrigerator's fill cycle.
• Helps prevent water from spraying or dripping away from the intended fill area.
• Common symptoms for replacement: visible leaks, dripping after fills, inconsistent or no water during fill cycles.
• Interfaces with the fridge water tubing and fill valve to deliver proper flow.

• Disconnect power to the appliance before starting any repair.
• Shut off the water supply and drain residual water to avoid spills.
• Replace using basic hand tools; ensure proper seating and secure connections to avoid leaks.

The wire harness is an OEM part for Whirlpool washing machines. This harness is a network of color-coded wires that connect the machine's electrical control module to other components. It allows for the transmission of power and data necessary for operating wash cycle functions.

Causes stem from normal wear over time as wires endure constant motion during every cycle. Accidental cuts or exposed wires from damage can also cause failures.

Symptoms of a bad wire harness include:

• The washer not starting or only partially functioning
• Error codes displaying or cycles not completing properly
• Corrosion or physical damage seen on wire connectors

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Color: White

This impeller cap fits over the dishwasher's wash pump impeller to secure it in place and help maintain proper water flow and spray pressure for effective cleaning. Replacing a cracked or missing cap can reduce noise and restore consistent performance.

• Secures the wash pump impeller and helps prevent wobble or rubbing
• Helps maintain proper water circulation to the spray arms
• Common symptoms of a failed/missing cap: poor cleaning, unusual grinding/rattling noises, or visible damage in the pump area
• Designed for the specific pump/sump design used on select models

• Disconnect power and turn off water supply before servicing
• Access the pump from inside the tub; remove the lower rack, spray arm, and filter/cover as required
• Note cap orientation; press or twist-lock fully onto the impeller (reuse any existing fastener if your model uses one)
• Inspect the impeller and seals while accessible; replace worn parts as needed

Size: 8 foot long. This external washer drain hose is needed when there is more distance between the washer and the drain. Note: comes with 1.5" diameter clamp but hose is 1.25" in diameter; therefore you may need to order the 1.25" diameter clamp separately: WP356138

Size: 29 1/4 inches x 31 1/4 inches. This universal washer drip tray is large enough for duet washers and sits under the washer to protect your floors from scuffs, spill, etc. Includes a PVC drain fitting.

The RING-TUB Top Loading Washer is an OEM component specifically designed for Whirlpool top-loading washers. The ring tub is cylindrical and houses the inner tub that holds water during the wash cycle. It allows for proper spinning of the tub during the drain and spin cycles to remove water from fabrics. 

The ring-tub is subjected to rotational forces and vibrations during each cycle. Causes of a bad ring-tub include cracks, chips, or other damage due to stress and wear over time. Loose fasteners, broken mounting tabs, or a misshapen structure are also signs it needs replacement. 

Symptoms of a bad ring-tub include:

• Water leaking from the tub during spin cycles 
• Excessive noise or vibration
• Slow or inadequate draining of water
• The washer becomes imbalanced and off-center when spinning

This OEM Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Used from harness to top.

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components.  Proper installation is critical for the washer's structural integrity.

Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time. 

Symptoms of a bad screw include:

• Rear panel detaching from frame opening gaps
• Increased noise and vibrations from a compromised seal  
• Stress on other connections from improper mounting points
• Potential leak paths from openings near hoses or tub areas

This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Lid Hinge (left) is an OEM replacement part for Whirlpool brand top-load washing machines. It is the hinge mechanism attached to the left side of the washer door assembly.

Symptoms of a bad hinge include: 

• Looseness, wobbling, or inability to securely support the weight of the washer door
• Strange noises or difficulty smoothly operating the door 
• Failure to keep the door fully open or closed
• Potential safety hazards if the door cannot be properly positioned

Causes involve wear and tear from repeated opening and closing of the washer door over many cycles, as well as damage from excessive weight loads placed on the door over time.

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, and select Kenmore models.

This replacement filter captures airborne grease and cooking particles from the vent system. It helps protect the blower and ducting and keeps airflow efficient so your hood or microwave-hood can clear smoke and odors more effectively. What it does:

• Traps grease and food particles to reduce buildup inside the vent path
• Helps maintain proper airflow and ventilation performance
• Replace when torn, warped, heavily saturated, or won't stay seated
• Common symptoms: lingering odors or smoke, greasy residue near the cooktop, visible damage to the filter

• 1 filter

• Disconnect power and allow the appliance and filters to cool before servicing
• Release the retaining tabs or latch and remove the old filter
• Seat the new filter fully and secure per your user guide
• Do not operate the appliance without all required filters installed

The Hose is an OEM part for Whirlpool washing machines. This hose connects the drain pump to the outer drain hose, allowing water to empty from the washer.

Flexible yet durable, the drain hose withstands pressure during spin cycles without risk of bursting or kinking. Consistent drainage is vital for fully removing water after each cycle.

Causes of a bad hose can include cracks from extended use, mineral or soap buildup restricting flow, or stressed connections that have weakened over time.

Symptoms of a bad drain hose include:

• Incomplete drainage of water at the end of cycles
• Puddles or leaks near the pump or drain area
• Sloshing sounds of retained water inside the machine
• Enlarged hose diameter from constant pressure

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This factory-style screw secures panels, brackets, and internal components in your appliance. It replaces a missing or damaged fastener to restore a tight, aligned, rattle-free fit.

• Provides the correct #6-32 machine thread to match original tapped holes
• Secures covers, control housings, brackets, or trim in place
• Helps reduce vibration or rattling from loose panels
• Common signs you need this fastener: missing screw, stripped/damaged screw, loose or misaligned component

• Disconnect power and shut off water/gas before service
• Match length and head style to the original location before installing
• Start threads by hand to avoid cross-threading; tighten only until snug
• Use the correct driver or nut driver specified for your model's fastener head

This replacement hinge supports and guides the appliance door for smooth opening and closing, restoring proper alignment and helping the door seal correctly. Ideal when a worn hinge causes sagging, noise, or improper latching. What it does:

• Provides a secure pivot point so the door opens and closes smoothly.
• Keeps the door aligned to maintain a proper seal and prevent gaps.
• Reduces hinge noise, scraping, or binding during door movement.
• Common symptom indicators: door sagging, door doesn't stay closed, uneven gap, or noisy operation.

• Disconnect power (and water, if applicable) before starting any repair.
• Support the door while removing or installing the hinge to prevent the door from falling.
• Use the correct hand tools; snug fasteners securely but avoid overtightening.

A replacement water pump that removes water from the washer during drain cycles, helping restore proper draining and reducing standing water that can prevent the washer from completing drain or spin cycles. What it does:

• Pumps water from the wash tub to the household drain during drain and spin cycles.
• Common symptom: washer won't drain or leaves standing water in the drum.
• Common symptom: pump hums, makes loud/grinding noises, or leaks when the pump is failing or blocked.
• Replacing a worn or damaged pump can resolve drain-related error codes and interrupted cycles.

• Disconnect power and shut off water supply before servicing the appliance.
• Drain excess water and place towels/a shallow pan before removing the old pump to avoid spills.
• Inspect and, if needed, replace associated hoses and clamps to ensure a reliable seal.

The Water Valve and Fill Housing Assembly is an OEM component specifically designed for Whirlpool washing machines. This assembly includes both the water valve and housing that holds it, which work together to control water flow into the washer during operation. 

Over time, the valve and housing can experience wear or become corroded due to chemical exposure, reducing efficiency. 

Symptoms of a bad water valve and fill housing include:

• Slow or improper water fill 
• Leaks or water drips from the valve area
• Abnormal squealing or whining noises
• Inability to select certain water levels

This OEM Whirlpool replacement part is also compatible with KitchenAid, Roper, Estate, Amana, Crosley, and some Kenmore models.