Wzf34x18dw08 Parts

This evaporator fan motor drives the fan that circulates chilled air across the evaporator coils and through the cabinet, helping maintain even, stable temperatures and consistent cooling performance.

• Moves air across the evaporator coils and through the vents for uniform cooling
• Helps the refrigerator recover temperature after door openings
• Common symptoms of a failing motor: fresh food section warmer than the freezer, little or no airflow from vents, fan not running with the door switch pressed, or loud/abnormal fan noise
• Supports overall system efficiency by keeping air moving around stored items

• Disconnect power to the appliance before servicing
• Transfer and reuse the original fan blade, bracket, grommets, and screws if your model uses them
• Clear any frost or obstructions from the fan shroud and surrounding area before reassembly
• After reassembly, restore power and press the door switch to confirm the fan runs and airflow is present

The Evaporator Coil is an OEM part for Whirlpool refrigerators. It is responsible for absorbing heat from the refrigerator interior as refrigerant passes through its fine tubes and fins. Cool air is then circulated through convection to maintain consistent temperatures.

Causes of a bad evaporator coil can include mineral deposits or frozen moisture clogging fins over time, physical damage to tubes, or corrosion of metal surfaces.

Symptoms of a bad evaporator coil include:  

• Inability to decrease interior temperatures sufficiently  
• High energy bills due to inefficient heat transfer
• Abnormal ice buildup inside due to poor airflow
• Warm or lukewarm areas inside the refrigerator compartment

This OEM Whirlpool part is also compatible with Maytag, Jenn-Air, KitchenAid, and some GE models.

This outer decorative door trim restores the finished edge and appearance of a refrigerator/freezer door, covering gaps and protecting the door edge from damage. It helps maintain a clean, sealed look and improves door aesthetics. What it does:

• Replaces damaged, cracked, or missing outer door trim for a finished appearance
• Covers and protects the door edge from nicks and wear
• Helps keep the door gasket sitting properly at the edge to reduce visible gaps
• Commonly needed when trim is broken, warped, or cosmetically worn

• Disconnect power to the appliance before beginning any repair to avoid injury.
• Installation typically requires removing the door or inner components; keep fasteners and parts organized.
• Use gentle prying to release clips or trim retainer; avoid forcing to prevent damage to surrounding surfaces.

The Drain Tube is an OEM part for Whirlpool-brand French door refrigerator water dispensers and ice makers. It channels excess water away during the icemaking process. 

Causes of a bad drain tube can include mineral buildup clogging the narrow opening over time or cracks developing from rigid ice contact every cycle.

Symptoms of a bad drain tube include:

• Water failing to properly drain away from the ice maker
• Puddles or leaks appearing near the freezer floor   
• Ice production deteriorating due to water backup
• Mineral scale deposits accumulating around connections

Replacing it with this OEM tube restores full water ejection to produce clean ice. Also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerators.

This wire harness is a factory-style wiring assembly designed to restore reliable electrical connections between major appliance components. It helps ensure consistent power and signal routing for proper operation and safety. What it does:

• Routes power and control signals between components to enable normal appliance functions
• Replaces damaged, burned or frayed wiring that can cause intermittent operation
• Can resolve symptoms such as components not powering, controls not responding, or cycles failing to start
• Provides original-style connector ends and wire routing for a plug-and-play fit when installed correctly

• Disconnect power (and gas if applicable) before beginning any repair
• Compare the new harness to the old one to confirm connector types and lengths before installing
• Route and secure the harness following original cable paths and mounting points to avoid chafing or heat exposure
• If wiring or connector damage is extensive, inspect associated components and replace as needed.

This genuine replacement door hinge restores proper door alignment and smooth pivoting on compatible refrigerators, helping doors close fully and maintain an even seal for optimal cooling. What it does:

• Supports and pivots the refrigerator door so it opens and closes smoothly
• Keeps door aligned to prevent sagging, rubbing, or uneven gaps
• Helps maintain a tight seal to reduce cold air loss and improve efficiency
• Stops door from binding or catching when opening

• Disconnect power to the appliance and empty or support the door before beginning.
• Use proper tools and support the door while removing/installing the hinge to avoid injury or damage.
• Tighten mounting hardware securely but do not overtighten; follow OEM torque guidance if available.

This OEM wiring harness connects the appliance's electrical components to restore reliable power and signal paths. Replaces a damaged or burnt harness to help stop intermittent operation and wiring-related error codes. What it does:

• Carries power and control signals between components to enable normal operation.
• Replaces frayed, melted, or broken wiring that can cause intermittent power or failures.
• Helps resolve symptoms such as no power to modules, lights, or motors and erratic component behavior.
• Restores factory routing and connector fit for reliable connections.

• Always disconnect the appliance from power (unplug or shut off breaker) before servicing.
• Follow the OEM wiring diagram and secure harness routing to avoid pinching or contact with moving parts.
• Match connectors and colors; do not splice unless using proper connectors and techniques.

This heat shield protects nearby components from high oven temperatures, helping prevent heat damage and maintain safe operation. It's a direct-fit replacement designed to restore proper thermal protection. What it does

• Deflects and shields adjacent parts from radiant heat generated by the oven cavity.
• Helps prevent discoloration, warping, or premature failure of nearby panels and wiring.
• Can stop heat-related smells or scorching around the oven interior or cabinet.
• Restores intended oven airflow and thermal clearance when the original shield is damaged or missing.

• One replacement heat shield

• Disconnect electrical power (and shut off gas for gas ranges) before starting any repair.
• Handle carefully — edges may be sharp; wear gloves and eye protection.
• Verify correct mounting orientation and fasteners; reuse original screws if in good condition or replace with OEM-specified hardware.

This replacement control switch completes the appliance's electrical circuit so controls and functions respond correctly. It restores user input and on/off signaling for reliable operation of the affected control or latch assembly. What it does:

• Acts as the electrical contact that opens or closes a control circuit when pressed or actuated
• Restores control-panel or door/lid signaling so cycles can start and stop as intended
• Common symptom fixes: appliance won't start, intermittent or no response from a button or control, or a stuck/non-responsive switch
• Fits into the original switch housing and mates with factory wiring harnesses when the correct part is used

• One replacement control switch

• Disconnect power (unplug or switch off breaker) before attempting replacement
• Handle electrical connectors gently and avoid forcing terminals; replace any damaged wiring or connectors