Zdp304npss Parts

The Door Hinge (Left) is an OEM part for GE gas ranges. This hinge is responsible for securely and smoothly mounting the oven door to allow easy access to the cooking cavity. 

Causes of a bad hinge include normal wear and tear from years of opening and closing the heavy oven door. The repeated motion can cause hinge mechanisms to loosen, fail to properly support the door weight, or become misaligned over time.

Symptoms of a bad hinge (left) include: 

• The oven door sagging or unable to stay open on its own  
• Difficulty smoothly opening and closing the door
• Noisy or gritty motion from the hinge when in use
• Improper alignment that impacts sealing of the door

This genuine GE replacement hinge is compatible with some Hotpoint and RCA models as well. 

This oven bezel assembly is the front trim piece that restores the oven's look and protects the control area. It replaces a cracked, dented or worn bezel to return your oven's finished appearance and safeguard components. What it does:

• Covers and protects the oven control area and edges from spills, heat, and wear
• Restores a clean, factory appearance after cosmetic damage or corrosion
• Helps keep control switches and display area free from debris
• Commonly used when the front trim is bent, cracked or loose

• One oven bezel assembly

• Disconnect power to the appliance before starting any work
• Remove oven door or control panel fasteners as needed to access mounting screws
• Handle carefully to avoid scratching the finish or chipping nearby glass

Replacement knob assembly for the grill/broil thermostat — restores reliable temperature control and a secure grip. Easy to swap, it gets your grill control working smoothly so you can set heat levels with confidence. What it does:

• Restores positive engagement for the grill/broil thermostat when the original knob is cracked, missing, loose, or spins freely
• Allows accurate selection of grill temperature settings and repeatable control feel
• Direct-fit control knob designed to match the OEM spline and dial orientation for proper operation
• Durable construction made for regular oven use

• Disconnect power or unplug the appliance before beginning any repair
• Remove the old knob by pulling it straight off the control shaft; align the new knob with the control spline and push until fully seated
• No special tools typically required; if the knob is stuck, use gentle leverage and avoid metal prying that could damage the shaft
• Allow the appliance to cool before working near heating elements or hot surfaces

This 1/4-20 screw secures panels, brackets, and other assemblies in your appliance. It restores a tight, reliable hold when an original fastener is missing, stripped, or corroded.

• Fastens components that require a 1/4-20 threaded screw
• Helps keep panels and assemblies aligned and rattle-free
• Direct replacement for worn, rusted, or lost hardware
• Common symptoms: loose or vibrating parts, misaligned brackets, missing fastener

• Disconnect power; turn off gas supply before servicing
• Allow the appliance to cool; wear gloves and eye protection
• Start threads by hand to avoid cross-threading; use the correct driver/tool
• Tighten snugly—do not overtighten to prevent stripping or damage

This LED power supply powers and regulates the refrigerator's LED lighting, restoring reliable interior illumination. It replaces a failed driver to stop flicker and prevent LEDs from remaining dark or dim. What it does:

• Converts appliance line voltage to the proper low-voltage DC for LED strips
• Keeps LED lights stable and prevents flickering or intermittent operation
• Restores full brightness when a failed driver causes dim or no interior lighting
• Protects LEDs from irregular voltage that can shorten lamp life

• Disconnect power to the appliance before starting any work to avoid shock.
• Handle the board and connectors carefully to avoid static or physical damage.
• Basic hand tools and access to the light housing/panel are usually required.

This LED board is the refrigerator interior light assembly that restores bright, even illumination inside the fresh-food compartment for easier visibility and safer food access. What it does

• Powers and distributes LED light to illuminate the refrigerator interior
• Replaces a failed or dimming light board to stop flicker or complete loss of interior lighting
• Ensures even light coverage across the compartment for better visibility
• Works with the refrigerator's existing light housing and connectors to restore normal operation

• One LED board

• Disconnect power to the appliance before starting any work
• Handle the board by its edges and avoid touching LED components or circuitry
• Remove shelves and trim as needed to access the light housing; keep track of screws and retainers
• Reconnect all wiring and verify proper operation before reassembling the compartment

This hidden bake element provides the oven's primary lower heating source for baking and roasting. It restores consistent bake heat and is a direct-replacement part used in many GE electric ranges and wall ovens. What it does:

• Heats the oven cavity from the bottom for baking and roasting cycles
• Replaces a burnt-out or non-heating lower element to restore oven temperature
• Helps improve evenness of baking when the original element no longer reaches set temperature
• Commonly used when the oven won't bake or the lower area doesn't get hot

• One hidden bake heating element

• Disconnect power at the breaker or appliance plug before starting any work
• Allow the oven to cool completely and remove oven racks before accessing the element
• Element typically secures with mounting screws and two electrical terminals; support the element while removing/replacing to avoid stress on wires
• After installation, restore power and run a short bake cycle to verify operation

This clip retainer secures the oven door glass to the door frame to keep the glass stable during use and prevent rattling or separation. Simple replacement restores proper glass alignment and reduces vibration noise. What it does:

• Holds the inner door glass in position inside the oven door assembly.
• Prevents the glass from shifting, rattling, or contacting other door parts.
• Helps maintain a safe, stable door assembly after a cracked or missing clip.
• Commonly replaced when the glass feels loose or the door vibrates during operation.

• One clip retainer for door glass.

• Disconnect power to the appliance before starting and allow the door to cool completely.
• Remove the oven door per the manufacturer instructions and handle glass with care — support both pieces of glass when separating.
• Use basic hand tools; keep track of screws and any spacers removed.

This LED light assembly replaces a failed or damaged interior refrigerator light to restore bright, energy-efficient illumination inside the fresh-food compartment. It mounts in the light housing and connects to the factory wiring harness. What it does:

• Replaces burned-out or broken interior LED lighting
• Restores consistent, flicker-free illumination when the door is opened
• Helps you see foods and settings clearly on shelves and door bins
• Works with the factory light housing and wiring for a direct replacement

• Disconnect power to the appliance before beginning any work to avoid electric shock.
• Handle the LED assembly and connectors carefully; avoid touching LED surfaces or exposing contacts to moisture.
• Some installations require removing the light housing or interior trim; keep fasteners organized for reassembly.
• If mounting screws, brackets, or clips are not obvious, refer to the appliance's parts diagram or service manual to identify the correct removal order.

This anti-tip brace secures the range to the floor or wall to help prevent the appliance from tipping forward when a heavy load is on an open oven door or when pressure is applied to the top edge. It restores a key safety restraint and helps stabilize the appliance. What it does

• Anchors the range to reduce forward tipping when the oven door is open or heavy items are placed on the door
• Helps prevent accidents and appliance movement during normal use
• Works with the range's built-in leveling and mounting points to provide a secure attachment
• Commonly replaced after a move, installation, or if the original bracket is damaged or missing

• One anti-tip brace

• Follow the appliance installation manual for correct placement and mounting location
• Unplug the appliance (or shut off power) and remove access panels as needed before installing
• Use appropriate fasteners for your floor/wall material; secure to framing or floor as specified