Zif36nm Parts

This actuator arm connects to the fresh-food air damper to move the damper door and help direct cold air into the refrigerator compartment. Replaces a worn or broken arm to restore damper movement and airflow control. What it does:

• Moves the fresh-food air damper door when the damper motor or actuator rotates
• Helps regulate airflow into the refrigerator compartment for proper cooling distribution
• Commonly replaces cracked, broken, or detached arms that cause stuck or misaligned dampers
• Works with the existing damper assembly and actuator motor to transfer motion

• One actuator arm for the fresh-food damper

• High-level replacement: access the damper assembly inside the refrigerator, remove fasteners/clips, swap the arm, and reassemble
• Verify power is disconnected before starting work to avoid electrical shock or motor activation
• Handle plastic parts gently to avoid cracking; confirm alignment of the arm on the actuator shaft before securing
• If damper motor or gears are damaged, replace those components as needed—this arm only restores the mechanical link

The Condenser Coil is an OEM part for GE refrigerators. It is a part of the refrigeration system responsible for releasing heat from the refrigerator.

A bad condenser coil can occur due to factors such as dirt and debris buildup, damage to the coils, or a malfunctioning condenser fan. If you notice symptoms such as inadequate cooling, excessive heat on the back of the refrigerator, or the condenser fan not running, it may indicate a faulty or malfunctioning condenser coil.

Symptoms of a bad condenser coil include:

• Inadequate cooling or inconsistent temperature control
• Excessive heat on the back of the refrigerator
• Condenser fan not running or running intermittently

Restore your refrigerator by replacing the faulty condenser coil with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This inlet water valve controls water flow into the appliance, allowing the dispenser and ice/water systems to fill on demand. Replaces a worn or failed valve to restore water delivery. What it does:

• Opens and closes water flow when the dispenser or ice maker calls for water
• Helps maintain proper fill for ice makers and dispenser systems
• Commonly used when dispenser or ice maker does not fill, fills slowly, or runs continuously
• Can leak or drip when internal seals or solenoids fail

• One inlet water valve assembly

• Disconnect power and shut off the water supply before starting work
• Relieve water pressure and have a towel or small container ready for residual water
• Tighten fittings to manufacturer torque; check for leaks after reconnecting water

This fill tube delivers water from the refrigerator supply to the icemaker so trays fill properly for ice production. Made to match OEM fit and restore normal ice maker water fill operation. What it does:

• Directs water from the supply line to the icemaker fill cup so each cycle fills the ice tray.
• Commonly replaced when the tube is cracked, frozen shut, or damaged and ice trays do not fill.
• Helps prevent unwanted water leaks in the freezer compartment when intact and properly installed.
• Works with the icemaker fill system; does not include water valve or tubing.

• One fill tube.

• Disconnect power and shut off the water supply before starting any repair.
• Remove freezer liners/evaporator cover as needed to access and replace the tube; follow manufacturer disassembly steps.
• Handle the tube carefully to avoid kinks or damage; ensure secure connection to the water inlet and icemaker.
• If you see continued filling issues after replacement, check the water valve, inlet line, and icemaker assembly for faults.

This small replacement wire retainer secures heater and sensor wiring to the evaporator area, preventing wire contact with sharp edges and maintaining proper routing for reliable defrost operation and safe airflow. What it does:

• Holds heater and thermostat/sensor wires in place near the evaporator assembly
• Prevents chafing, pinching, or accidental contact with moving or hot components
• Helps maintain correct wire routing for consistent defrost performance and temperature sensing
• Reduces risk of intermittent connections or short circuits caused by loose wiring

• Designed for a simple clip-in or screw-mount installation; inspect mounting point for clips or fasteners before replacing
• Disconnect power to the appliance before accessing the evaporator compartment
• Handle wiring gently and ensure secure seating of wires in the retainer before reassembling panels
• If any wiring or insulation is damaged, replace or repair the wiring harness per manufacturer guidance