Ziss42odrcs Parts

This compressor overload protects the refrigerator's compressor by interrupting power when it overheats or draws excessive current. Replacing a weak or failed overload can stop repeated click/no-start symptoms and help restore normal cooling performance.

• Opens the circuit to protect the compressor during overheat or over-current conditions
• Automatically resets after cooling to prevent sustained damage
• Symptoms include: compressor won't start, rapid clicking from the compressor area, starts then stops, and a warm refrigerator/freezer
• Helps prevent motor and wiring damage caused by repeated overload events

• Disconnect power before servicing; wear appropriate PPE
• Access the rear machine compartment and remove the compressor/start device cover
• Note wire positions; pull the old overload straight off the compressor terminal and push the new one on fully seated; reconnect wiring and covers
• If the overload trips again after replacement, further diagnosis of the start relay, run capacitor, or compressor may be required

Includes 12 washers.

This light reflector directs and protects the appliance lamp, improving illumination and preventing direct bulb contact. It restores proper light focus so interior areas are evenly lit and bulbs remain securely positioned. What it does:

• Reflects and directs light from the lamp for better interior visibility
• Shields the bulb from contact with food or components
• Helps maintain consistent light output and coverage
• Commonly replaced when light appears dim, uneven, or the reflector is cracked or missing

• Disconnect power to the appliance before servicing to avoid electric shock
• Remove the bulb before installing the reflector; handle bulbs and reflector with care to avoid damage
• Use only compatible replacement parts and follow the appliance manufacturer's instructions

This dispenser housing shield replaces the plastic housing that protects and supports the refrigerator dispenser assembly, restoring a clean, secure dispenser opening and helping prevent leaks or damage. Ideal for cracked, warped, or broken dispenser trim. What it does

• Covers and protects the dispenser opening and internal dispenser components
• Provides a stable mount for dispenser controls and actuators
• Helps prevent water from leaking into the cabinet around the dispenser
• Restores appearance and function when the dispenser trim is cracked, split, or warped

• Disconnect power and water supply before starting any work
• Remove the dispenser bezel or door trim to access the housing; keep fasteners for reassembly
• Handle plastic parts gently to avoid cracking; use appropriate trim tools if needed

This toe kick skirt is the lower front trim panel that covers the refrigerator's toe space, restoring finished appearance and helping keep dust and debris out from under the cabinet. It replaces damaged, cracked, or missing toe-kick trim to improve looks and fit. What it does:

• Covers the refrigerator toe space and provides a finished front trim at the base.
• Hides gaps and mounting hardware while helping limit debris buildup under the appliance.
• Restores proper alignment and appearance after impacts, cracks, or missing trim.
• Designed to match the appliance's original lower front profile and mounting locations.

• For safety, disconnect power to the appliance before removing lower panels or working near components.
• Removal typically requires pulling out the lower drawer/vent and releasing clips or screws; keep original hardware for reinstallation.
• Align the skirt with mounting locations and secure with the original clips or screws; do not force into position.

This base shaft is the support shaft that helps the washer's tub or drum stay aligned and rotate smoothly. Replacing a worn shaft restores proper drum support and reduces noise, wobble, and uneven operation. What it does:

• Provides a stable pivot and support for the tub/drum during operation
• Transfers rotational force from the drive components to the drum assembly
• Prevents excessive wobble, vibration, and metal-on-metal contact when intact
• Worn or damaged shafts can cause noise, drum misalignment, or premature bearing wear

• Disconnect power and water supply before servicing; follow all safety precautions
• Replacement typically requires removing the cabinet and drum assembly for access
• Inspect adjacent bearings, seals, and mounting hardware and replace if worn
• Use appropriate tools and follow the OEM service manual

This main board standoff provides a secure mounting point for the appliance control (main) board, keeping the board elevated and insulated to prevent shorts and vibration-related damage. Use it to restore proper board clearance and support. What it does:

• Secures the main control board to the chassis to keep connectors aligned and stable.
• Creates an insulated gap between the board and metal surfaces to reduce risk of electrical shorts.
• Reduces board movement and vibration that can cause intermittent electrical or connection issues.
• Commonly used when a board is loose, improperly seated, or rubbing against the cabinet.

• One main board standoff.

• Disconnect power before accessing internal parts to avoid shock or component damage.
• Handle the control board by its edges and avoid touching circuitry; use anti-static precautions if available.
• Install the standoff in the OEM mounting location and secure the board without over-tightening to prevent damage.
• If multiple standoffs are required, replace any missing or damaged mounts.

This pack contains twelve replacement screws used to fasten appliance panels, trim, and components. They restore secure mounting and help stop rattling, loose panels, and gaps for a safer, quieter appliance. What it does:

• Secures exterior and interior panels, brackets, and trim pieces
• Restores proper fit where missing or stripped screws cause movement or noise
• Helps maintain appliance alignment and prevents parts from vibrating loose
• Used for general-purpose repairs on compatible GE appliances

• Disconnect power or unplug the appliance before performing any internal repairs
• Use the correct screwdriver bit and avoid overtightening to prevent stripping threads
• Keep remaining screws in a labeled container for future service
• If a screw does not seat easily, stop and verify correct fit to avoid damage

This dairy bin is the removable refrigerator door shelf used to hold butter, small dairy items and condiments; it restores secure storage and organized door shelving. Fits the 42" wide door shelf position. What it does:

• Replaces a cracked, chipped or broken door dairy bin so items stay contained
• Restores proper storage on the refrigerator door to prevent spills and shifting
• Allows the door shelf to close and seal without obstruction from a damaged bin
• Provides an easily removable container for cleaning and loading small items

• One dairy bin

• Empty the door shelf and remove any previous bin before installing
• Align the bin tabs with the door shelf tracks and snap into place until secure
• Handle carefully to avoid chipping; do not force—if it won't seat smoothly, recheck alignment
• No special tools required; refer to your refrigerator manual for detailed removal/installation instructions