18 Gear Parts

This tub wheel mounts on the dishwasher's tub wall to guide and support the rack as it slides in and out. Replacing a worn wheel restores smooth rack movement and helps prevent binding, noise, and derailments.

• Mounts to the tub to provide rolling support for the dish rack/rail
• Replaces cracked, flattened, or missing wheels that impede rack travel
• Helps fix racks that stick, bind, are hard to pull/push, or derail
• Reduces grinding or squeaking from the rack area

• Disconnect power at the breaker before servicing
• Open the door and pull the rack forward for access
• Release the old wheel from its retainer/axle per your model's design; install the new wheel in the same orientation
• Ensure the wheel spins freely and the rack slides smoothly before use

This customized pin is a precision fastener that serves as a pivot or locating point within your appliance. It helps keep mating parts aligned and moving smoothly. Replace a bent, worn, or missing pin to restore proper operation. What it does

• Acts as a pivot/axle or locating pin between connected parts
• Maintains alignment to reduce wobble and uneven movement
• Supports smooth opening/closing or rotation at the joint
• Common signs it's needed: looseness, sagging or misalignment, scraping/squeaking at the pivot, or a visibly worn/bent/missing pin

• One customized pin

• Disconnect power (and shut off water supply, if applicable) before servicing
• Support the door/panel/assembly to remove load from the pin during removal/installation
• Note the orientation and order of any spacers, bushings, or washers and transfer them to the new pin
• Apply a light lubricant and verify smooth movement before restoring power

Note: Roller only. Axle must be ordered separately by model.

This roller assembly supports the dryer drum and lets it turn smoothly to help clothes tumble evenly. Replacing a worn roller restores proper drum rotation and reduces noise and wobble during use. What it does:

• Supports the dryer drum on a stationary shaft so the drum spins freely
• Reduces squeaking, grinding, or scraping noises from a worn roller
• Helps prevent drum wobble and uneven tumbling that can affect drying
• Restores smooth rotation for improved operation and reduced wear on other components

• One roller assembly

• Disconnect power before starting and remove the dryer back panel to access the drum rollers
• Inspect adjacent parts (belt, glides, rear bearing) and replace if worn to avoid repeat failures
• Reinstall drum and panels carefully, ensuring the roller rides squarely on the shaft and the drum is aligned
• Test spin by hand before reconnecting power and running a short cycle to confirm quiet, smooth operation

The Refrigerator Gear Solenoid is an essential component for maintaining the smooth operation of your refrigerator. This genuine OEM part ensures precise control of the gear mechanism, enhancing the appliance's overall performance and reliability. Designed specifically for Samsung refrigerators, it guarantees a secure fit and easy installation. By replacing a worn or faulty gear solenoid with this high-quality part, you can restore your refrigerator's functionality and prevent further issues. The Refrigerator Gear Solenoid helps maintain optimal cooling efficiency, ensuring your food stays fresh longer. Trust in this reliable component to keep your Samsung refrigerator running smoothly and efficiently, providing you with peace of mind and a better user experience.

This is the rear wheel support for a dishwasher rack. It helps guide and support the rack as it slides in and out, restoring smooth movement and preventing the rack from binding or derailing.

• Supports and guides the rack at the rear during opening/closing
• Helps correct issues like a wobbly, sticking, or misaligned rack
• Can address noisy, rough rack travel caused by a worn support
• Maintains proper rack tracking to reduce derailment

• Disconnect power and water before servicing
• Pull rack forward to access the rear support area
• Depress locking tabs/retainer to remove the old support; press-fit the new support until secure
• Verify smooth rack travel before returning the appliance to service

Upper dishrack roller kit. 2 per package.

This drum roller supports the dryer drum so it spins smoothly and quietly. Replacing a worn roller restores stable drum rotation and helps reduce rubbing, scraping or thumping noises during operation. What it does:

• Supports and guides the dryer drum for even, stable rotation
• Reduces friction and drum wobble that can cause noisy operation
• Helps the drive belt track correctly and maintain proper drum alignment
• Common symptom: squeaking, thumping, or rubbing sounds and uneven spinning

• Disconnect power before starting any repair
• Remove the dryer drum or access panel to inspect and replace the roller; support the drum while removing/reinstalling
• Check other drum rollers, bearings and the drive belt for wear and replace as needed to prevent repeat failure
• Reassemble carefully and test with the dryer empty to ensure smooth, quiet rotation

A lower stud and roller assembly is a feature included in dishwashers. The primary function of this piece is to allow the dishwasher rack to slide in and out of the machine smoothly. When the lower stud and roller assembly is broken or missing, a replacement part is necessary to continue the efficient use of the appliance.If the lower dishrack in the dishwasher will no longer slide in and out easily, it's an indication that there is a problem with the lower stud and roller assembly. It's a simple repair to complete. Wear gloves and disconnect the appliance before starting. Slide the dishwasher rack completely out to gain access to the lower stud and roller assembly. Secure in place, and slide the rack back into position.This lower stud and roller assembly is an authentic OEM replacement part. It is sourced by the manufacturer. The component is sold as an individual unit. The lower stud and roller assembly is made of high-quality, durable materials. The part is compatible with several models of dishwashers. The piece can be installed in General Electric, Hotpoint, and RCA brand appliances.

This roller fits the cable bracket assembly and helps guide the cable smoothly to reduce binding and wear. It restores proper cable tracking so the mechanism moves more quietly and reliably. What it does:

• Guides and supports the cable within the bracket so the cable runs true
• Reduces rubbing, binding, and premature cable wear
• Helps eliminate squeaks or grinding where the cable contacts the bracket
• Restores smoother operation of the affected door/assembly movement

• One roller for the cable bracket (quantity: 1)

• Disconnect power before starting any repair and follow all safety guidelines
• Requires basic hand tools; access the bracket per your model's service instructions
• Inspect the cable and bracket for wear or damage and replace if necessary
• Test operation after installation to ensure proper cable routing and smooth movement

This hinge pin secures the appliance door to its hinge assembly, letting the door pivot smoothly and stay properly aligned. Replacing a worn pin restores correct door movement and helps prevent rubbing or sagging. What it does:

• Acts as the pivot point that holds the door to the hinge assembly.
• Restores smooth opening and closing when the original pin is worn or damaged.
• Helps correct door sag, uneven gaps, and contact between door and cabinet.
• Prevents excessive wear of hinge components when replaced promptly.

• One hinge pin

• Disconnect power (or unplug) and empty/remove the door or support it per your manual before starting.
• Support the door while removing the old pin to avoid injury or damage.
• Basic hand tools are typically required; avoid forcing parts and inspect hinge parts for additional wear.

This coupling connects the washer drive motor to the transmission to transfer power for agitation and spinning. Replacing a worn or broken coupling restores reliable drive engagement and reduces noise and slipping. What it does:

• Transfers motor rotation to the transmission so the drum agitates and spins
• Prevents metal-on-metal contact between motor and gearbox when intact
• Common symptom: washer won't agitate or spin, or slips under load
• Common symptom: loud grinding or clunking noises from the washer during cycle

• One coupling

• Disconnect power and water before servicing; follow the manufacturer's disconnection procedures
• Access may require removing the washer cabinet or front panel—refer to your model's service manual
• Inspect adjacent parts (motor mounts, shaft splines) for wear and replace as needed

This wheel and bearing assembly mounts to the upper dishrack, allowing it to glide smoothly in and out on the rail. Replacing a worn or broken wheel restores smooth operation and helps keep the rack securely on track.

• Supports and guides the upper rack along the side rails
• Restores smooth rolling and proper rack alignment
• Helps prevent the rack from binding or derailing
• Common symptoms: rack hard to slide, falls off track, wheel cracked/missing, squeaking or grinding as the rack moves

• Disconnect power before servicing; remove the upper rack from the rails by releasing the rack stops
• Release the old wheel/bearing from the rack tabs and remove
• Snap the new assembly into the rack mounting holes until it locks
• Reinstall the rack and verify smooth travel on both rails

This dishwasher tub wheel mounts to the inner side of the tub and supports the rack track as it moves. Replacing a worn wheel restores smooth glide and helps keep the rack aligned during loading and unloading.

• Supports the rack track on the tub wall
• Keeps the rack moving smoothly and aligned
• Reduces friction and noise during operation
• Failure signs: rack hard to slide, squeaking or grinding, rack tilting or coming off track, cracked/missing wheel

• Disconnect power and water supply before servicing
• Pull out the rack and remove track end caps or the rack, as needed, to access the wheel
• Remove the retaining screw/clip, install the new wheel, and verify it spins freely and seats fully
• Reassemble and test rack movement through full travel

This shaft for the float switch is the replacement shaft that secures and guides the dishwasher float to accurately detect water level, helping the appliance fill and shut off properly. Direct-fit design replaces the worn or broken float shaft. What it does

• Guides the float so the level-sensing switch can detect low or high water levels.
• Prevents overfilling by ensuring the float actuates the water-level switch reliably.
• Commonly replaces a cracked, bent or missing shaft that causes inconsistent fill, continuous filling, or water-level errors.

• One replacement float switch shaft.

• Disconnect power to the appliance before starting any repair.
• Remove the access panels and float assembly per your model's service instructions to reach the shaft.
• Inspect the float and switch for damage; replace only the failed components as needed.
• Reassemble carefully and test fill/stop operation before returning the appliance to service.