Loose Band Wire Connection Parts

This control box wiring harness routes power and signals between the appliance control board and other components to restore reliable control operation and electrical connectivity. It helps resolve intermittent controls and lost function caused by damaged wiring. What it does:

• Connects the control board to switches, sensors and motors to enable normal control functions.
• Replaces damaged or frayed wiring that can cause intermittent operation or unresponsive controls.
• Addresses symptoms such as control panel not responding, random shutdowns, or error codes tied to wiring faults.
• Restores proper signal and power routing when connector damage or wire breaks interrupt circuits.

• Disconnect all power to the appliance before beginning any service.
• Compare the new harness to the original and follow factory connector positions and routing to avoid pin miswiring or chafing.
• Handle connectors gently and ensure all terminals fully seat; inspect mating connectors for damage before reconnecting.

This clip is a small plastic retainer designed to secure trim and lightweight panels so they stay in place and reduce rattling or gaps. It restores proper fit and helps keep parts aligned for a finished look. What it does:

• Secures trim pieces, panels, or grill components to the appliance frame
• Prevents loose or rattling parts that can cause noise or misalignment
• Holds components in correct position so doors and panels close properly
• Replaces worn or broken clips that no longer grip reliably

• Remove power or disconnect the appliance before servicing when applicable
• Clip installs by snapping into pre-existing mounting hole or slot; no special tools usually required
• Inspect mating surfaces and replace any additional damaged fasteners for best fit

This is a replacement single electrical harness that restores the factory wiring connection between components. It provides a like-for-like connection to help return affected functions to normal operation when wiring is damaged. What it does:

• Carries electrical signals/power between components and the appliance control circuits
• Replaces frayed, melted, or broken wiring that can cause intermittent or complete function failure
• Commonly used when a component has no power, a circuit is open, or functions stop responding
• Helps eliminate loose connector issues that cause intermittent operation or error codes

• One (1) single electrical harness (part 6877ER3003C)

• Always disconnect power (unplug or shut off breaker) before inspecting or replacing wiring
• Match connector shapes and pin counts; do not force connectors—verify secure seating
• Route and secure the harness per factory paths and clips to prevent chafing or heat exposure
• If you see melted connectors, burned insulation, or repeated failures,

The thermostat bulb clip is an OEM component specifically designed for Whirlpool drop-in electric ranges, securely fastening the thermostat sensor bulb. This clip features corrosion-resistant spring coils and precision tips.  

Symptoms of a bad thermostat bulb clip include:  

• Dangling thermostat bulb
• Temperatures inside oven might be incorrect because sensor bulb is not mounted correctly.

Causes of failure involve metal fatigue weakening the thermostat bulb clip over years of expansion and contraction during heating, worn surfaces losing grip, or damaged barbs failing to anchor the thermostat bulb.

Replace yours today with this genuine OEM Whirlpool clip. Compatible with Jenn-Air, GE, and select Kenmore appliances, reinforced coils maintain constant tension assuring safety. Reliable glass retention enhances interior illumination for tasks.

This controller assembly is the main electronic control board that manages your appliance's cycles and user interface, restoring normal control when the original board fails. It replaces a faulty control module to help the unit operate reliably. What it does:

• Controls timing, cycles, and functions per user commands and sensor inputs
• Replaces malfunctioning or unresponsive control electronics that cause erratic operation
• Can resolve symptoms such as no power to controls, unresponsive buttons, or incorrect cycle behavior
• Works with existing wiring harnesses and display components when compatible

• Disconnect power before beginning work to prevent shock or damage
• Verify connector locations and orientation before removing the old board
• Handle the board by edges and avoid contact with circuitry to prevent static damage

The Refrigerator Sensor Mounting Clip is essential for securely attaching the sensor in your Samsung refrigerator. This genuine OEM part ensures your refrigerator's sensor remains firmly in place, promoting accurate temperature regulation and optimal performance. Crafted with durability in mind, the mounting clip provides a reliable solution for maintaining your appliance's functionality. Compatible with a wide range of Samsung refrigerator models, it allows for easy installation and seamless integration. Its sturdy design prevents sensor displacement caused by vibrations or frequent door openings, ensuring consistent operation. If your original sensor mount is worn, damaged, or missing, the Refrigerator Sensor Mounting Clip offers a straightforward replacement to keep your fridge operating smoothly and efficiently.

This wire harness routes power and control signals between the appliance control and components to restore reliable electrical connectivity. It replaces damaged or burned wiring to help resolve intermittent operation and loss of function. What it does:

• Provides organized, insulated wiring to connect the control board to heaters, motors, sensors and switches.
• Restores continuity where frayed, pinched or burned wires cause faults or shorts.
• Common symptoms this can address: control panel unresponsive, appliance won't start, intermittent power or components not operating.
• Designed to follow factory routing and connector positions for correct fit and electrical function.

• Disconnect all power before replacing any wiring; verify power is removed at the breaker or unplug the appliance.
• Take photos or mark connector positions before removal to ensure correct reconnection.
• Avoid pulling on individual wires; remove and install at the connector housings to prevent terminal damage.
• If wiring is severely corroded or connectors damaged, inspect adjoining components and replace per service manual.

This replacement power cord restores electrical connection to compatible Whirlpool appliances, providing a safe physical replacement for a damaged or worn cord. It lets the appliance receive power so it can operate normally. What it does:

• Replaces a damaged, frayed or broken power cord to restore appliance power
• Provides a secure, standard electrical connection at the appliance inlet
• Helps eliminate intermittent power loss, arcing at the plug, or exposed wiring concerns
• Used when the original cord shows visible wear or electrical faults

• One replacement power cord as shown

• Disconnect power at the breaker or unplug the appliance before starting
• Follow the appliance service manual for cord routing and strain relief attachment
• Use basic hand tools; ensure all connections are secure and insulated

High-voltage harness routes power between high-voltage components in a microwave oven, restoring safe electrical connections and preventing intermittent operation or arcing when replacing a damaged or burned wiring assembly. What it does:

• Connects the microwave's high-voltage components to maintain proper power flow.
• Failing or damaged harnesses can cause no-heat, intermittent heating, arcing, burning smell, or blown fuses.
• Replaces frayed, melted, or corroded high-voltage wiring that risks shorting or unsafe operation.
• Designed to restore original electrical routing and secure connector fit for reliable operation.

• Disconnect power and unplug the appliance before servicing. Ensure the high-voltage capacitor is properly discharged—do not attempt service without this step.
• Inspect connectors, insulation, and routing; replace damaged clips or retainers and secure wiring away from sharp edges and moving parts.
• Follow the wiring diagram for correct connections.
• Never operate the appliance with covers or safety panels removed.

This harness burner box is the wired ignition assembly that routes spark and power to a cooktop's burner valves and igniters, restoring reliable ignition and consistent burner operation. What it does

• Delivers spark and electrical connection to surface burner igniters and gas valve controls.
• Replaces damaged or frayed wiring that can prevent burners from sparking or lighting.
• Restores proper routing and secure connections to reduce intermittent ignition failures.
• Intended for use with compatible gas range cooktops that use a burner-box ignition harness.

• Designed for experienced DIYers; disconnect power and shut off gas before starting.
• Inspect mating connectors, igniters and valves while installing; replace any visibly damaged components.

This harness connects the burner box wiring to the cooktop's controls and safety devices, ensuring reliable ignition and proper sensor/valve communication. Replaces a damaged or worn burner-box harness to restore safe burner operation. What it does:

• Carries power and signals between igniters, flame sensors/thermocouples, and gas valves
• Supports ignition; failure can cause burners to not light or spark inconsistently
• Prevents intermittent operation caused by frayed wires, loose connectors, or heat damage
• Helps maintain correct sensor feedback for safe gas shutoff

• One burner box wiring harness

• Disconnect power and shut off gas supply before starting any repair
• Match connector styles and routing to the original harness; inspect nearby components for heat damage
• Use proper strain relief and secure fasteners to prevent contact with hot surfaces

This clip cover is a small snap-in plastic trim piece that protects and secures appliance panels or trim, giving a finished look and hiding fasteners. Replaces broken or missing covers to restore appearance and retention. What it does:

• Snaps into place to conceal screws or clip anchors on trim and panels
• Helps hold lightweight trim pieces securely to the cabinet or frame
• Prevents exposed fasteners and reduces snagging or sharp edges
• Useful when cracked, worn or lost covers cause loose or rattling trim

• One clip cover

• Disconnect power or unplug the appliance before accessing panels or trim
• Push the clip cover onto the mating clip or anchor until it snaps fully into place
• Use a small flat tool only to remove; avoid prying on surrounding trim to prevent damage
• Replace any damaged mounting clips before installing the cover for a secure fit

This clamp secures hoses, tubing or wiring to the appliance frame to help prevent rubbing, vibration and routing issues. It restores a solid attachment point so lines stay in place during normal use. What it does:

• Holds a hose, tubing or wire bundle in place to prevent chafing and abrasion
• Keeps components routed away from moving parts and hot surfaces
• Reduces rattling or vibration caused by loose lines
• Helps maintain safe, reliable connections by preventing strain on fittings

• Disconnect power and shut off water before servicing
• Use basic hand tools; avoid over-tightening which can pinch hoses or wires
• Inspect adjacent hoses/wires for wear and replace if damaged
• Take photos before removal to ensure correct reinstallation

The Refrigerator Clip-Fitting Lock is essential for maintaining the integrity of your refrigerator's door seal. This genuine OEM part ensures a secure and tight fit, preventing cold air from escaping and keeping your food fresh longer. Designed specifically for Samsung refrigerators, the Clip-Fitting Lock provides reliable performance and durability. Installing this lock is straightforward, allowing you to effortlessly restore your refrigerator's functionality without the need for professional assistance. The sturdy construction of the Refrigerator Clip-Fitting Lock helps to minimize energy loss, contributing to more efficient cooling and lower energy bills. By replacing a worn or damaged lock with this genuine OEM part, you can enhance the overall performance of your appliance. Its compatibility with a range of Samsung refrigerator models guarantees a perfect fit and seamless integration. Whether youGÇÖre dealing with a loose door or ensuring a proper seal, the Refrigerator Clip-Fitting Lock is the ideal solution for maintaining your refrigerator's optimal operation and extending its lifespan.

This wire harness routes power and signals between an appliance's control and electrical components to restore reliable connections and operation. Use it to replace a damaged or frayed harness that is causing power or control issues. What it does:

• Re-establishes secure electrical connections between controls, motors, switches and sensors
• Routes and organizes multiple wires to prevent shorts and chafing
• Replaces burned, frayed or broken wiring that can cause intermittent operation
• Helps resolve symptoms like no power to controls, unit not starting, or inconsistent function

• Disconnect all power (unplug or switch off circuit breaker) before servicing
• Label or photograph connector locations before removal to ensure correct reassembly
• Route harness to avoid pinch points and secure with original clips or ties
• Replace the harness and inspect mating components if you see melted connectors or damaged terminals

This harness burner box is the wiring assembly that routes power and ignition signals to a gas range's burner box, restoring reliable electrical connections for safe burner ignition and consistent operation. What it does:

• Routes power and ignition signals between the control valve, igniters and burner box components
• Provides factory-style connector interfaces to maintain correct electrical paths
• Helps resolve intermittent or no-ignition issues caused by damaged or loose wiring
• Reduces risk of arcing or shorting from frayed or burned harness wiring

• Always disconnect electrical power and shut off the gas supply before servicing
• Handle connectors gently and seat each connector fully to avoid loose connections
• Inspect surrounding insulation and connectors for heat or burn damage and replace if needed