Control Knob Parts

This replacement surface burner control knob attaches to the valve stem on a gas range or cooktop, letting you select and adjust flame levels. Replacing a worn or missing knob restores positive feel and accurate control of your burners.

• Mounts to the burner valve stem to turn from OFF to LITE/HI/LO and regulate flame height
• Restores proper control when the original knob is cracked, stripped, loose, or missing
• May help when the knob spins without moving the valve or won't stay on the stem
• Helps ensure consistent heat settings for cooking

• Ensure all burner controls are OFF and the appliance is cool before starting
• Pull the old knob straight off the valve stem; avoid prying or twisting sideways
• Align the new knob with the OFF position and press straight on until fully seated
• If the knob won't seat securely, inspect the valve stem for wear or damage

This control knob replaces a worn or missing dial so you can reliably select settings on your appliance. It restores a secure fit on the control stem and smooth turning for accurate adjustments.

• Interfaces with the control stem to set temperatures, cycles, or power levels
• Replaces cracked, stripped, loose, or missing knobs that wobble or won't stay on
• Helps restore smooth turning and a firm, accurate feel
• Common symptoms: knob broken, spins freely, hard to turn, or falls off

• Disconnect power and, if applicable, shut off gas before servicing
• Pull the old knob straight off the control stem; avoid prying sideways
• Align the new knob with the stem shape and press until fully seated; if your design uses a set screw, tighten gently
• If the knob won't fit or stay on, inspect the control stem for damage

This thermostat knob fits onto the oven's temperature control shaft so you can select and read the cooking temperature. Replacing a cracked or missing knob restores smooth adjustment and a clean, factory look on the control panel.

• Interfaces with the oven thermostat to set cooking temperature
• Pointer aligns with panel markings for clear, repeatable selection
• Common reasons to replace: cracked hub, stripped insert, missing or loose knob
• Symptoms include wobbling, slipping, not staying on, or unreadable markings

• Disconnect power and allow the oven to cool before servicing
• Pull the old knob straight off the thermostat shaft
• Align the new knob with the shaft and press firmly until fully seated
• Check pointer alignment with the panel markings after installation

Gas valve burner control knob. Color: Black. Measures about 2 inches in diameter. For white order WP74011408.

Color: Black   simmer knob.

Color: white. Measures about 2 inches in Diameter.

Color: White

Gas range and cooktop surface burner knob. Color: Black. It measures about 2 inches in diameter. For white order WP3181305. For almond order WP3181306.

The Burner Control Knob is an OEM replacement part for Whirlpool cooktops and ranges. This knob allows the user to adjust the flame or heat level of the burner by turning it to the desired setting. Designed for durability, it ensures smooth and accurate control over the cooking process.

Causes of a bad Burner Control Knob can include wear from frequent use, cracking or breaking due to excessive force, or damage from exposure to high heat. Improper cleaning methods or accidental impacts can also lead to failure.

Symptoms of a bad Burner Control Knob include:

• Difficulty turning or adjusting the burner flame
• The knob feeling loose or not engaging properly with the control shaft
• Visible cracks, warping, or other damage

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For black order WP71001641.

This replacement control knob restores easy, accurate selection of settings when your original is cracked, stripped, or missing. It attaches to the control shaft so you can adjust temperatures and functions as intended.

• Attaches to the control shaft to adjust heat, time, or function settings
• Replaces knobs that are cracked, loose, missing, or spin without engaging
• Helps when settings are hard to select or the indicator no longer lines up
• Restores a secure grip and consistent feel during operation

• Disconnect power before servicing; also shut off the gas supply
• Remove the old knob; if a set screw is present on your model, loosen it before pulling off
• Align the new knob with the shaft and press firmly until fully seated
• Verify smooth operation and correct indicator alignment after installation

This replacement control knob restores smooth, reliable operation of a range surface burner. It mounts on the valve stem so you can turn the burner on/off and select heat levels with a secure grip. What it does:

• Attaches to the burner valve stem to control flame/heat
• Replaces knobs that are cracked, stripped, wobbly, or missing
• Helps prevent slipping or free-spinning on the stem
• Common symptoms: knob won't turn, falls off, or is melted/damaged

• Includes 1 knob assembly

• Turn all burners off, allow the surface to cool, and disconnect power before beginning
• Pull the old knob straight off the stem; no tools are usually required
• Align the flat side of the stem with the new knob and press firmly until seated
• If it won't seat, stop and inspect the stem for damage or misalignment

This black control knob replaces a worn or missing knob on your cooking appliance, restoring smooth, accurate selection of burner or oven settings and a clean, consistent appearance.

• Attaches to the control valve or switch shaft to set heat levels
• Common fix for cracked, stripped, wobbly, or missing knobs
• Restores proper pointer alignment and positive feel when turning
• Helps ensure you can reliably return the control to OFF

• Allow the appliance to cool; disconnect power before servicing controls
• Pull the old knob straight off the shaft—do not pry against the panel
• Align the flat side of the insert with the shaft and press on firmly until fully seated
• The pointer aligns with OFF and turns smoothly; do not force if the shaft is damaged

LF, LR, RR Black

Color: Black

Color: black. Measures about 2 inches in diameter.

Color: black. Measures about 2 inches in diameter.