Inlet Valve Parts

This small check ball helps control water flow inside the refrigerator's water/ice system to prevent backflow and ensure proper filling. It restores reliable water seating where valves or distributor ports use a ball-style check. What it does:

• Acts as a one-way seal to stop water from flowing backward into the supply line or valve bore
• Helps the ice maker and dispenser fill correctly by allowing water in but not back out
• Common symptom: intermittent or incomplete ice maker fills
• Common symptom: slow or continuous dripping from dispenser or valve area

• Shut off water supply and unplug the appliance before starting
• Small part — handle carefully and note orientation/seat before removal
• Inspect valve bores and seals for debris; clean area before installing new check ball

This guide assembly is the track that supports and directs a dishwasher rack as it slides in and out. Replace a worn or damaged guide to restore smooth rack movement, alignment, and reliable loading. What it does:

• Provides the sliding path that supports and guides the dishrack
• Maintains rack alignment to prevent derailment
• Helps the rack extend and retract smoothly without binding
• Common symptoms: rack hard to slide, tilts or falls off track, scraping/grinding noises, visible cracks or broken tabs on the guide

• 1 guide assembly

• Disconnect power and shut off water before servicing the dishwasher
• Pull the rack out and remove any end caps or stops to access the guide
• Release locking tabs or screws, note orientation, and swap the old guide with the new one
• Reinstall stops/end caps and test rack travel for smooth operation

This replacement water inlet valve controls the flow of water to the appliance's dispenser and ice-making components, restoring normal fill and preventing supply interruptions when a valve fails. What it does

• Opens and closes to allow water into the dispenser and ice maker on demand
• Restores water flow if the dispenser or ice maker won't fill
• Stops water supply when closed to help prevent overfilling or continuous flow
• Common replacement for intermittent flow, no-water, or leaking symptoms

• Turn off power and shut off the water supply before starting any work
• Inspect fittings, hoses, and seals and replace any damaged components to prevent leaks
• Use basic hand tools; hand-tighten fittings and check for leaks after reconnecting water

Made by Whirlpool. Fits most Whirlpool, Kenmore, Estate and Roper belt driven washing machines.

Replacement water inlet valve that controls water flow into the refrigerator's dispenser and ice maker, restoring proper filling and preventing overflows. Direct-fit design replaces the original valve on compatible Whirlpool refrigerators. What it does:

• Regulates water flow from the household supply to the refrigerator dispenser and ice maker.
• Opens when the dispenser or ice maker calls for water and closes to stop flow and prevent overfilling.
• Common symptoms: no water from the dispenser, slow/weak fill, ice maker not filling, or water leaking at the valve.
• Designed to match the original valve's function and plumbing connections for straightforward replacement.

• Disconnect power to the appliance and shut off the water supply before starting any work.
• Use basic hand tools to remove and reinstall mounting screws and water line fittings; support lines to avoid stress on fittings.
• Inspect and replace any damaged O-rings or supply tubing; tighten fittings securely but avoid overtightening.
• After installation, turn water on slowly, check all connections for leaks, then restore power and verify dispenser/ice maker operation.

This water inlet valve controls water flow into the appliance, allowing the correct amount of water to enter during fill cycles so the machine can wash properly and drain when commanded. Reliable operation helps prevent no-fill or overfill symptoms. What it does:

• Opens and closes to allow water into the washer during fill cycles.
• Enables correct water level and filling timing when signaled by the control board.
• Commonly replaces failing valves that cause no-fill, slow-fill, continuous filling, or leaking at the valve.
• Works with standard inlet hoses and connector fittings used on compatible washers.

• Disconnect power and shut off the water supply before servicing.
• Note hose and electrical connector locations before removal to ensure correct reinstallation.
• Tighten water connections securely and check for leaks after restoring water and power.

The Valve is an OEM part for Whirlpool refrigerators. As a critical ice maker component, the valve controls the flow of water to fill the mold and release ice cubes. 

Causes of a bad valve can include mineral buildup disrupting water passages over time, worn internal seals, or damage from freezing.

Symptoms of a bad valve are:  

• Irregular or incomplete ice filling in the mold
• Ice cubes sticking or failing to eject properly
• Water leaks inside or outside the ice maker
• Pressure issues preventing the ice maker from operating

This OEM Whirlpool part is also compatible with Maytag, Jenn-Air, KitchenAid, and some Kenmore models.

Float that detects and communicates water level to the appliance control so the washer or dishwasher can fill and drain properly. Replaces a cracked, stuck, or worn float to restore reliable water sensing. What it does:

• Senses water level and relays position to the machine's control system.
• Helps prevent overfilling or unintended continuous filling when working correctly.
• Can resolve symptoms such as flooding, constant filling, no fill, or improper drain cycles.
• Works with the appliance's existing valve and switch components to re-establish normal fill/drain operation.

• Disconnect power (and water supply where applicable) before beginning service.
• Remove outer panels or tub shroud to access the float; use basic hand tools.
• Handle clips and fittings gently; do not force plastic tabs or connectors during removal/installation.
• After installation, restore power and run a test cycle to ensure correct fill and drain behavior.

This float dome positions and protects the float inside the tub so the appliance can sense water level correctly. Replacing a cracked or missing float dome helps restore reliable fill control and reduces overfill or erratic fill symptoms. What it does

• Houses and guides the float so the fill sensor detects water level accurately.
• Prevents the float from sticking or catching on the tub, which can cause overfilling.
• Helps stop intermittent or continuous fill problems caused by a broken or displaced float.
• Keeps debris away from the float area to reduce false water-level readings.

• Disconnect power and water supply before accessing the tub or removing panels.
• Remove the lower access panel or kickplate to reach the float area; handle plastic parts gently to avoid cracking.
• Inspect surrounding seals and the float itself; replace any damaged components for reliable operation.
• After installation, restore power and run a short fill/drain cycle to verify correct float movement and water-level control.

This inlet valve controls water flow into the appliance, restoring proper fill cycles and stopping leaks when a valve fails. Replace a faulty inlet valve to regain consistent, reliable water delivery. What it does

• Opens and closes to allow water into the appliance during fill cycles.
• Replaces a valve that can cause no water, slow fill, or intermittent filling.
• Stops unwanted water flow or continuous filling when internal seals fail.
• Prevents leaks caused by a cracked or worn valve body or seals.

• Disconnect power and shut off the water supply before starting any work.
• Relieve residual water pressure and place towels or a pan to catch drips.
• Basic hand tools required; follow OEM instructions.

This inlet valve assembly controls the flow of water into the washer so cycles fill correctly and on schedule. A direct-fit replacement that restores proper water delivery and helps prevent overfilling or no-fill conditions. What it does:

• Opens and closes to allow cold and hot water into the tub during fill cycles.
• Responds to the washer's control signals to deliver the correct water amount.
• Commonly replaces a valve that leaks, won't fill, fills slowly, or causes continuous filling.
• Helps resolve related error codes or fill/level issues when caused by a faulty valve.

• Disconnect power and shut off both water supply lines before starting work.
• Drain remaining water from hoses and use caution when handling connectors.
• Inspect inlet hoses and seals; replace damaged hoses or seals to prevent leaks.
• After installation, restore water and power, then run a short test cycle to check for proper fill and leaks.

This inlet valve controls the water flow into the appliance so it fills when needed. Replacing a faulty valve restores normal fill cycles and helps prevent water delivery problems. What it does:

• Opens and closes to allow water into the appliance during fill cycles
• Stops water flow when fill is complete to prevent overfilling
• Common symptom: appliance won't fill or has low/no water flow
• Common symptom: appliance fills continuously or intermittently

• Disconnect power and shut off the water supply before starting
• Use basic hand tools; avoid overtightening inlet fittings or damage to ports
• Inspect hoses and seals; replace damaged hoses or gaskets as needed
• After installation, restore power/water and run a test cycle to check for leaks and proper operation

This mixing valve controls and directs hot and cold water into the washer to produce the desired fill temperature for each cycle. Replaces a worn or leaking inlet control to restore correct water selection and filling behavior. What it does:

• Directs hot and cold water to create the set wash or rinse temperature
• Opens and closes water flow during fill cycles so the tub fills to the correct level
• Commonly replaced for leaking, no-fill, or incorrect-temperature symptoms
• Works as the washer's water inlet/mixing control within the water valve assembly

• One mixing valve assembly (single unit as shown)

• Disconnect power and shut off both hot and cold water supplies before servicing
• Handle gently; avoid bending or stressing inlet ports and electrical connectors
• Verify hose and connector condition when reinstalling; tighten fittings to prevent leaks

The Inlet Valve is an OEM component specifically designed for GE washing machines. It controls water entry into the washer tub during designated points in wash cycles.

Symptoms of a bad inlet valve include: 

• Inability to fill with water or short fills during wash steps  
• Leaks or water constantly running from the inlet area of the washer
• Odd sounds, banging or skipping when the filling mechanism engages

Causes involve mineral buildup, corrosion, or stripped valve internals preventing proper closure after years of use. 

This GE OEM replacement inlet valve ensures precise water fill levels. Compatible with some Hotpoint, RCA, and Kenmore models as well, it maintains optimal cycle functioning. 

This secondary water valve assembly controls water flow to the appliance's secondary water circuit, restoring proper water delivery for dispensers or ice makers. Replacing a faulty valve helps stop leaks and restore reliable filling. What it does:

• Opens and closes the secondary water path to allow water to the dispenser or ice maker
• Stops water flow when the appliance signals shutoff, preventing overfilling
• Commonly used when no water reaches the dispenser or ice maker
• Can be replaced to resolve intermittent flow, continuous filling, or valve leaks

• Disconnect power and shut off the water supply before beginning work
• Turn off and relieve pressure in the water line, then disconnect supply and outlet fittings
• Inspect and replace any damaged inlet hoses or seals; tighten fittings to manufacturer torque specs
• After installation, restore water and power, check for leaks and verify proper operation