Ecb Parts

This timer assembly controls the wash cycle sequence and timing so the machine advances through fill, agitate, drain and spin steps. Replaces a worn or non-advancing control to restore proper cycle sequencing. What it does:

• Selects and advances washer cycles (fill, agitate, drain, spin) based on timer position
• Restores cycle advancement when the dial won't move or the washer is stuck on one cycle
• Stops erratic or intermittent cycle changes caused by a failing timer
• Works with mechanical timer-driven cycle controls

• One timer assembly

• Disconnect power before starting; this part requires handling internal controls
• Remove the control panel or console to access and replace the timer; retain alignment of the dial and actuator
• Note and reconnect all wiring to the same terminals; avoid forcing connectors
• After installation, test multiple cycles to ensure proper advancement

This washer timer replaces the machine's cycle control knob assembly to restore accurate cycle sequencing and timing. It helps return your washer's ability to advance through wash, rinse and spin selections. What it does:

• Advances washer cycles and controls the sequence of wash, rinse and spin operations
• Sends signals to valves, motor and other controls so selected cycles run properly
• Common symptom: washer won't advance through cycles or stays stuck on one cycle
• Common symptom: controls are unresponsive, or cycles stop before completion

• Disconnect power before servicing to avoid shock — for gas units also shut off gas if applicable
• Verify wiring connections and knob alignment before final assembly; note or photo wires before disconnecting
• Mounts with screws and connects to the washer's factory wiring harness; no universal modifications recommended

This control base assembly is the molded housing that holds the appliance's user-interface components. Replacing a damaged base restores proper alignment and secure mounting of the control board, switches, and display for dependable operation.

• Provides structural support and mounting points for the control board, switches, and display in the control area
• Keeps buttons/knobs aligned for smooth, consistent actuation
• Helps protect and organize wiring within the control panel
• Typical symptoms: cracked or broken housing, loose or sunken controls, buttons sticking or not lining up, rattling/vibration from the control area

• Disconnect power to the appliance before servicing
• Remove the control panel/console to access the base; retain screws and clips for reuse
• Transfer existing control components and wiring to the new base in the same positions
• Avoid overtightening screws into plastic; verify button travel and alignment before reassembly

This main control PWB is the appliance's primary electronic control board that manages user inputs and cycle functions, restoring normal control when a faulty board causes operational issues. What it does:

• Receives user commands and runs appliance control algorithms
• Powers and updates the touchpad/display and indicator lights
• Manages timing, relay switching, and communication with sensors
• Common symptom: appliance won't start, has a blank or erratic display, or shows control-related error codes
• Helps correct unresponsive buttons, intermittent operation, or unexpected cycle behavior when board failure is confirmed

• Disconnect power (unplug or shut off breaker) before accessing the control board
• Handle the PWB by its edges and avoid static discharge; use ESD protection if available
• Refer to the appliance wiring diagram and service manual for proper connector placement and safety procedures

This electronic control module manages a range of oven/cooktop functions so the appliance responds correctly to front-panel commands and control inputs. Replacing a failed module restores normal control and display operation. What it does:

• Receives input from touchpads/knobs and sends signals to heating elements, relays, and sensors
• Controls oven timing, temperature setpoints, and cycle sequencing
• Powers or drives the display and indicator lights when working properly
• A failed module can cause unresponsive controls, blank or erratic displays, or interrupted heating cycles

• Disconnect all power to the appliance before starting work to avoid shock or damage
• Handle the board by its edges and avoid static discharge; wear a grounded wrist strap if available
• Verify connector orientation and seating; do not force connectors or components

This electronic control board manages the appliance's functions and timing, restoring proper operation to controls and cycles when the original board fails. Replaces a failed or unresponsive control module to help the appliance run correctly. What it does:

• Regulates user inputs, cycles, and timing signals for the appliance's functions
• Communicates with sensors and relays to start and stop motors, valves, and heaters
• Can resolve symptoms like unresponsive controls, incorrect cycles, or intermittent operation
• Helps stop erratic behavior caused by damaged or shorted circuit components

• One electronic control board

• Disconnect power before accessing the control board to avoid shock or damage
• Handle the board by its edges and avoid touching components or connector pins
• Verify wiring harness connectors match and are fully seated before restoring power

This is a genuine OEM manufactured controller for ovens and ranges that has been sourced directly from the manufacturer. This part is made by Frigidaire and is intended to replace a controller that has been broken or rendered ineffective. In order to safely and properly work the oven, the controller needs to be in working order, as it controls the temperature and oven settings. Over time, the user may find the controller becomes worn, warped, corroded, cracked, or otherwise broken, requiring replacement. When undergoing any sort of repair work, the power supply should always be entirely disconnected. It is highly recommended that work gloves are worn for protection.This controller is sold individually and is made from high-quality, durable, non-corrosive materials. It is an authentic replacement part and is suitable for use on a wide variety of ovens and ranges that have been manufactured by Frigidaire, Electrolux, Kelvinator, Westinghouse, and other brands.

This electronic control board replaces the oven's primary control module to restore timing, display, and bake/broil cycle control. It fixes issues where the range won't start, displays errors, or has unresponsive touch controls. What it does:

• Manages oven temperature settings, timed bake cycles, and user interface commands
• Controls relays and sends signals to heating elements and sensors
• Helps stop incorrect displays, unresponsive buttons, or intermittent operation
• Works with safety interlocks and diagnostics to maintain normal oven functions

• One electronic control board as shown

• Disconnect power at the breaker before accessing the control panel to avoid shock
• Handle the board by edges and avoid touching components to prevent ESD damage
• Confirm connector locations match before installing; secure mounting screws and connectors

This electronic clock timer assembly controls the oven clock and timed cooking functions so you can set, monitor, and use countdown or delay-start features from the range control panel. It restores visible time display and timer operation. What it does:

• Displays oven clock time and enables countdown/stopwatch-style timer functions
• Allows delayed start and timed cooking features controlled from the front control panel
• Restores audible timer alerts and on-screen time readout when the original clock fails
• Common symptom: blank or flickering clock display, non-working timer, or no audible timer alerts

• Disconnect power to the appliance before servicing to avoid shock.
• Access typically requires removing the control panel; handle the display lens and ribbon cables carefully.
• Verify harness connector orientation before removing the old unit; avoid pulling on wires.
• Follow the appliance's owner manual for clock/time setup.

This electronic control board replaces the refrigerator's main user interface control, restoring reliable temperature management and cycle sequencing. It lets the appliance receive user inputs and run timed defrost, compressor, and fan operations. What it does:

• Houses the control circuitry that manages cooling cycles, defrost timing and fan/compressor operation
• Responds to user input from the front control panel and translates commands to the appliance systems
• Can stop or reset erratic cycling, display control errors, or fix non-responsive controls when the board is faulty
• Common symptom: unresponsive control panel, incorrect temperatures, or failure to start compressor or defrost cycle

• High-level replacement only — disconnect power before accessing electrical components
• Handle the board by its edges and avoid static discharge; use an anti-static wrist strap if available
• Verify connectors are fully seated and wiring matches original locations before restoring power

This mechanical selector timer controls the wash cycle sequence and timing, restoring reliable cycle advancement and automatic transitions. It replaces a worn or non-advancing control to bring consistent cycle timing back to the appliance. What it does:

• Advances washer cycles and engages appropriate motor and valve circuits at set intervals
• Ensures timed transitions between fill, agitate, drain and spin stages
• Commonly needed when cycles won't advance, stop mid-cycle, or settings don't change
• Works as the electro-mechanical clock/controller that coordinates cycle operations

• One mechanical timer assembly

• Disconnect power before attempting service to avoid shock or injury
• Removal typically requires access to the control panel and disconnecting wiring harnesses; note wire locations or take a photo before removing
• Handle the timer gently; install only if identical to the original and fully secured before restoring power

This electronic main control board manages a fridge's user inputs and core functions so the appliance responds correctly to commands and cycles. Replacing a faulty control board restores reliable control and display operation. What it does:

• Receives signals from the user interface and sends commands to compressors, fans and other subsystems
• Manages timing and basic operational logic for cooling and accessory functions
• Restores display and front-panel responsiveness when the board is the failure point
• Stops or prevents erratic or intermittent appliance behavior caused by a failed control module

• One control board

• Disconnect power to the appliance before beginning work
• Handle the board by the edges and avoid static discharge; use a grounding strap if available
• Document connector locations/arrow orientations before unplugging; reconnect all harnesses firmly

This main electronic control board manages the appliance's user interface and core functions, restoring responsive controls and proper operation when the original board fails. What it does:

• Receives and processes commands from the control panel so buttons and displays respond correctly
• Communicates with sensors and other modules to manage temperature, timing, and cycle functions
• Powers relays and outputs that control motors, heaters, valves, or compressors depending on appliance type
• Replaces a failed or intermittent board that causes error codes, an unresponsive display, or inconsistent operation

• Disconnect power to the appliance before starting work to avoid electric shock
• Handle the board carefully; avoid touching components and use anti-static precautions
• Verify the part number on the existing board and the appliance wiring harness match before installation

This PCB assembly is the appliance's main control board that manages electronic functions and user-interface signals, restoring proper control and communication between sensors, motors, and the display so the appliance operates as intended. What it does:

• Routes power and control signals to motors, valves, sensors and the user interface
• Interprets inputs from buttons, dials or touch controls and runs selected cycles
• Helps prevent incorrect operation caused by faulty electronics
• Common symptoms: no power to controls or display, unresponsive buttons, error codes, or intermittent operation

• Disconnect power before servicing to avoid shock or damage
• Handle by the edges and avoid touching components; observe ESD precautions
• Confirm correct board PN and orientation before installing; some boards require bracket or connector transfer
• If symptoms persist after replacement, check wiring, connectors and related sensors

This electronic oven control is the console module that manages the oven's clock, timer, bake/broil functions and user interface. Replacing a faulty control restores reliable temperature control and timed cooking functions. What it does:

• Controls oven bake and broil cycles and interprets user commands from the front console
• Manages clock, delay start, timers and other electronic oven functions
• Can stop oven heating or display error codes when the original control fails
• Commonly replaced when display is blank, touchpad/keys don't respond, or oven won't heat

• Disconnect power at the breaker before starting any work to avoid shock
• Access typically requires removing the oven console or control panel; retain all screws and connectors
• Handle the module and display carefully to avoid static or physical damage