42 Belt Parts

This replacement drum belt wraps around the dryer drum and motor pulley to rotate the drum for normal drying. Replaces worn or broken belts to restore tumbling and help your dryer move loads evenly. What it does:

• Transfers motor power to the drum so clothing tumbles during the drying cycle
• Commonly used when the drum slips, won't turn, or makes a rubbing/squealing noise
• Helps maintain proper drum alignment and smooth rotation when in good condition

• Disconnect power before any service; follow the dryer's service manual for safe access
• Inspect idler pulley and motor shaft for wear when replacing the belt
• Re-tension and route the belt per the OEM diagram to avoid mis-tracking

This genuine OEM-style agitate and spin drive belt transfers motor power to the washer's transmission and tub, restoring normal agitation and spinning for effective wash and drain cycles. What it does:

• Wraps around motor pulley and transmission/tub pulley to drive both agitation and spin actions
• Replaces worn, glazed, cracked, or stretched belts that cause slipping or no spin
• Helps eliminate squealing or burning-rubber smells from a slipping belt
• Restores proper belt tension for consistent wash performance

• Disconnect power before starting any repairs to avoid shock or injury
• Inspect pulleys and idler/tensioner for wear and alignment; replace if damaged
• Route the belt per the washer's service diagram and verify proper tension before test running

Length 43", for most Admiral, Crosley, Norge, and Magic Chef washers

The drive belt is an OEM part for Frigidaire electric dryers. It acts as a link, transferring power from the dryer motor to turn the tumbling drum. During each drying cycle, the belt works diligently to rotate the drum and toss clothes in heated air.

Causes of belt failure involve normal wear and tear over time. Stretching, cracking, and dry rot are all contributors. Oiling or overloading the dryer can accelerate belt wear. 

Symptoms of a bad belt can include : 

• The dryer failing to start or stop 
• Excessive noise during operation
• Visible cracks or separation in the belt

This OEM replacement belt is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryers. 

This belt-drive is the replacement drive belt that turns the dryer drum so clothes tumble evenly during the cycle. It restores drum rotation when the original belt is worn, stretched, or broken. What it does:

• Wraps around the dryer drum and motor/idler assembly to transfer motor torque to the drum
• Restores normal drum rotation when the belt has failed or slipped
• Helps eliminate symptoms like a non-turning drum, rubbing or squealing noises, or intermittent tumbling
• Compatible with dryers that use a single continuous drum drive belt

• One (1) belt-drive

• Disconnect power (and gas supply for gas models) before servicing
• Access the dryer drum per your model's service instructions—usually from the front or rear—before removing the old belt
• Route the belt around the drum and idler/tensioner exactly as shown in the model's diagram; ensure proper tension and alignment
• If you encounter damaged pulleys, idler, or motor issues, inspect and replace those parts as needed

This drive chain connects a washer's motor/transmission to the agitator or drum, transferring rotational motion so the wash basket spins and agitates properly. Replaces a worn or broken chain to restore normal drive function. What it does:

• Transfers motor torque to the transmission/agitator so the tub spins and agitates
• Commonly replaced when the washer won't agitate or spin despite motor running
• Replaces stretched, rusted, or broken chain that causes slipping or unusual noise
• Works as a direct mechanical link—no electrical components involved

• Install with the appliance unplugged and water supply turned off; follow OEM service manual for alignment and tension
• May require partial disassembly of cabinet, pulley, or transmission; have basic hand tools ready
• Inspect sprockets, tensioners, and related components and replace if excessively worn

This Drive belt keeps the washer's transmission and tub turning by transferring motor power to the drum. Replaces a worn or broken belt to restore normal agitation and spinning performance. What it does:

• Transfers motor torque to the transmission/drum so the washer agitates and spins
• Stops slippage that can cause slow or no spin/agitate cycles
• Helps eliminate squealing or burning-rubber noises when the belt is worn
• Prevents further motor/drive damage from a broken or glazed belt

• Disconnect power and water supply before starting any repairs
• Remove access panels and shift the drum to relieve belt tension for removal
• Inspect pulleys, idler, and motor shaft for wear or debris before installing the new belt
• Route the belt according to the OEM diagram, then test run the machine

Replacement 4PH 2371 drive belt for residential dryers. Restores proper drum rotation and tumble so clothes dry evenly while reducing slipping, squealing, or burning-rubber odors caused by a worn or broken belt. What it does:

• Transfers motor power to rotate the dryer drum for normal tumbling.
• Replace if the drum won't turn, slips under load, squeals, or you notice a burning-rubber smell.
• For appliances that use a 4PH-2371 style drive belt—verify model fit before ordering.
• Helps prevent further wear to the drive system when installed with worn components inspected.

• Always disconnect electrical power (and gas supply if applicable) before starting service.
• Follow the appliance service manual for correct belt routing and proper tensioning.
• Inspect the idler pulley, motor shaft, drum glides, and support rollers; replace any worn parts while accessible.
• After installation, restore power and run a short test cycle to ensure smooth, even drum rotation.

This main drive belt transfers motor power to the appliance's drum/transmission so the tub spins reliably. It replaces a worn or broken belt to restore normal drum rotation and eliminate slipping. What it does:

• Wraps around the motor pulley and drum/transmission to convert motor torque into drum rotation
• Restores normal spin if the drum slips, won't turn, or makes a high-pitched squeal when starting
• Prevents further wear on motor and pulleys caused by a stretched or frayed belt
• Works with the appliance's existing pulleys and idlers to maintain correct tension

• One main drive belt

• Disconnect power (and water, if applicable) before beginning service
• Access panels and routing vary by model—refer to your service manual or belt routing diagram
• Inspect pulleys, idler(s), and drum seals for wear; replace any damaged parts to avoid repeat failure
• After installation, run a short cycle to confirm smooth, quiet operation

The Belt is an OEM part for GE dryers. This part is responsible for transferring power from the dryer's motor to the drum, enabling it to rotate and tumble your clothes during the drying cycle.

A bad drum drive belt can occur due to wear and tear, stretching, or snapping. If you notice symptoms such as the drum not spinning, unusual noises during operation, or clothes not drying properly, it may be time to replace this belt.

Symptoms of a bad drum drive belt include:

• Drum not spinning
• Unusual noises during operation
• Clothes not drying properly

Restore your GE dryer by replacing the faulty drum drive belt with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This V-type dryer belt powers the drum, transferring motor torque to rotate the drum for proper drying. Replaces worn or stretched belts to restore consistent drum rotation and improve drying performance. What it does:

• Wraps around the dryer drum and motor/idler to drive drum rotation
• Restores drum movement when original belt is broken, frayed, or slipped
• Helps eliminate noisy slipping or intermittent spinning caused by a loose belt
• Supports even tumbling so clothes dry more consistently

• Disconnect power (and shut off gas for gas dryers) before beginning any repair
• Observe belt routing around the drum, idler pulley, and motor pulley—refer to your model's diagram
• Inspect drum rollers, idler, and motor shaft for wear; replace if worn to prevent premature belt failure
• Use proper hand protection and avoid forcing parts

The Drum Drive Belt is an OEM part for GE electric dryers. It transmits rotational force from the motor to turn the dryer drum during operation.

Causes of a bad belt include cracks, breaks, or excessive stretching from repeated use over time. 

Symptoms include: 

• Drum fails to spin or rotates sluggishly during cycles
• Squealing, slipping, or grinding noises from the drive system  
• Burning rubber smell coming from inside dryer chamber

This GE OEM replacement belt helps optimize dry time and prevent damaged clothes from inefficient spinning. Compatible with some Hotpoint, RCA, and Kenmore models as well, it maintains smooth drum rotation. 

This V-shaped drive belt wraps around the dryer drum and motor pulley to transfer motor torque and rotate the drum for normal tumbling. It restores proper drum rotation and helps eliminate slipping or squealing. What it does:

• Transfers motor power to the drum so the dryer tumbles clothing evenly
• Maintains correct belt tension and alignment for smooth operation
• Worn or broken belts can cause the drum to stop turning, slip, or make squealing noises
• Replacing a damaged belt prevents further wear to pulleys and motor strain

• Disconnect power (unplug electric or shut off gas and electrical supply) before starting any repair
• Inspect the idler pulley and motor pulley for wear; replace if worn to prevent premature belt failure
• Route the belt around the drum and pulley per the dryer's belt routing
• After installation, run the dryer briefly to confirm proper tracking and noise-free operation