Hook Parts

The Dryer Door Catch Lever Assembly is an essential component for maintaining the functionality of your Samsung dryer. This genuine OEM part ensures that your dryer door closes securely every time, preventing unwanted openings and maintaining optimal drying performance. Crafted with high-quality materials, the assembly holder lever is designed for durability and long-lasting use, effectively withstanding the daily wear and tear of appliance operation. Installing the Dryer Door Catch Lever Assembly is straightforward, allowing you to quickly restore your dryerGÇÖs performance without the need for professional assistance. This part is specifically compatible with a range of Samsung dryer models, ensuring a perfect fit and seamless integration with your existing appliance. By choosing this genuine OEM part, you can be confident in the reliability and performance of your dryer, enhancing its overall efficiency and extending its lifespan. Whether replacing a broken or malfunctioning door catch, the Dryer Door Catch Lever Assembly provides a dependable solution to keep your laundry routine running smoothly.

This latch secures the door closed and signals the control that it's safe to run. Replace a worn or broken latch to restore solid door engagement and reliable operation.

• Engages the strike to keep the door firmly closed during use
• Provides the "door closed" signal to allow cycles to start
• Common symptoms: door won't latch or pops open; must hold door shut to run; "door open" message or won't start with door closed
• Helps ensure safe, consistent operation by maintaining proper door engagement

• Disconnect power before servicing; the appliance is fully de-energized
• Access the latch from the door/console area; note fastener and wiring locations for reassembly
• Inspect/align the door strike so the latch engages smoothly
• After installation, close the door and run a short cycle to confirm proper engagement and operation

The Whirlpool Dryer Door Catch is an OEM part for Whirlpool dryers. It secures the dryer door closed during operation, ensuring the safety and proper functioning of the appliance. This component engages with the door latch to hold the door shut, allowing the dryer to operate without interruption.

Causes of a bad dryer door catch can include normal wear and tear from frequent use, accidental damage, or deformation of the catch or latch that prevents proper engagement. Over time, the door catch can become loose or break, necessitating replacement to maintain the dryer's performance and safety.

Symptoms of a bad dryer door catch include:

• The dryer door not staying closed during cycles
• Difficulty closing the door securely
• The dryer stopping mid-cycle due to the door opening

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This door catch assembly secures the door by engaging the mating latch or strike, keeping it firmly closed for proper operation and safety. Replace a worn or broken catch to restore reliable door closure and consistent performance. What it does

• Engages the door latch/strike to hold the door closed during use
• Helps maintain proper door alignment and contact with seals/interlocks
• Restores a positive latch feel and consistent closure
• Common signs of wear: door won't latch or pops open, must be slammed to close, visible damage to catch tabs

• One door catch assembly

• Unplug the appliance or switch off power at the breaker before servicing; for gas appliances, shut off the gas supply
• Open the door, access the catch at the cabinet/frame, and remove retaining screws or clips
• Transfer any reusable hardware from the original part and install the new catch
• Verify smooth latch engagement and door alignment before restoring power

The Dryer Door Lever Assembly is essential for maintaining the functionality of your dryer. This genuine OEM part ensures a perfect fit and reliable performance, mirroring the quality of your original component. Designed specifically for Samsung dryers, the lever allows for smooth opening and closing of the dryer door, enhancing your overall user experience. Its durable construction provides long-lasting support, reducing the need for frequent replacements and saving you time and money. Installing the Dryer Door Lever Assembly is straightforward, helping you restore your dryer's convenience quickly and efficiently. By choosing this genuine OEM part, you ensure optimal performance and maintain the integrity of your appliance. Whether the original lever is worn out or broken, this Dryer Door Lever Assembly is the perfect solution to keep your dryer operating smoothly and effectively.

This Door Catch Bezel, in white, is an OEM part for Whirlpool dryers. It secures the dryer door, making sure it remains closed during operation. Crafted precisely to fit compatible dryer models, this bezel guarantees a secure and snug fit.

What causes a bad part:
The Door Catch Bezel might deteriorate due to frequent use, exposure to heat, or physical strain during the opening and closing of the dryer door. Additionally, prolonged exposure to cleaning agents or moisture can contribute to its degradation.

Symptoms for a bad part:

• Difficulty in securely closing the dryer door
• Loose or shaky door closure
• Visible damage or cracks on the bezel

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This bezel is a trim piece that finishes and protects the opening around a control or feature on the appliance's panel. Replacing a cracked or missing bezel restores a clean look and helps the mating control sit securely and operate properly.

• Frames the control or opening and covers raw edges for a finished appearance
• Helps keep the associated knob/button or trim aligned and seated
• Shields internal components from dust, splashes, and minor impacts
• Replace if cracked, warped, loose, or missing; symptoms can include a wobbly control, visible gaps, or cosmetic damage

• Disconnect power at the breaker before servicing; allow any hot surfaces to cool
• If applicable, pull off the knob or remove adjacent trim to access the bezel
• Release locking tabs or remove mounting screws carefully to avoid scratching the panel
• Align the new bezel with tabs/orientation marks and snap or fasten into place; reinstall parts and test

This lock cam is a small actuator that drives the appliance's door-lock mechanism. It translates the lock actuator's movement into a positive latch, helping the door lock securely when required and release correctly so cycles start and finish properly.

• Interfaces with the lock actuator and latch to engage and release the lock
• Wear, cracking, or rounding can cause the lock not to engage or to stick
• Common symptoms include a door/lid that won't lock or unlock, loose lock lever, clicking without latching, or door/lock-related error messages
• Restores proper linkage travel and switch actuation when the original cam is worn or damaged

• Disconnect power to the appliance before servicing
• Access the lock mechanism per your model; note the cam's orientation and any springs/linkages
• Install the new cam fully seated and ensure it engages the actuator and latch smoothly
• Reassemble, restore power, and test lock operation

Sturdy metal door strike that mates with the latch/lock on your machine's cabinet. It keeps the door closed and engages the door switch so cycles can start and run without nuisance stops.

• Interfaces with the door latch/lock mechanism to secure closure
• Engages the door switch/interlock so the appliance can start and continue running
• Restores proper door alignment and latch feel after wear or bending
• Typical symptoms: door won't latch or pops open; unit won't start/run; intermittent stopping mid-cycle; visible damage to the strike

• Unplug the appliance (and shut off gas to gas dryers) before servicing
• Remove the existing strike and retain mounting hardware; note orientation
• Install the new strike in the same position; tighten screws and verify alignment
• Close the door to confirm smooth latching and proper operation

This in the male piece on the front panel. For the female piece on the door order WPW10111905.

The Washer Lid Strike is an OEM part for Whirlpool washing machines. It is a metal bracket that secures the washer lid in a closed position during cycles. The lid strike has a spring-loaded arm that catches the lid tab, providing a tight seal and secure closure. 

Causes of a bad lid strike can include normal wear and tear over many cycles, damage from repeated impact or mishandling of the lid, or deterioration of components like the springs.

Symptoms of a defective lid strike include:

• The washer lid not latching properly or staying securely closed  
• Water leaks around the lid seam
• Error codes related to the lid not locking
• Difficulty opening the lid fully after cycles  

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washers. 

The Door Strike is an OEM replacement part for Whirlpool dryers. This component ensures the dryer door securely latches, enabling the appliance to operate and preventing it from running with the door ajar. It works in conjunction with the door catch to maintain a proper seal during drying cycles.

Symptoms of a bad Door Strike include:

• The dryer door not latching or staying closed
• The dryer not starting due to the door remaining open
• The door popping open during operation
• Visible wear, bending, or damage to the strike

Causes of a failing Door Strike can include regular wear and tear, misalignment from improper use, or damage from slamming the door. Replacing a faulty strike ensures the dryer operates safely and efficiently.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: metallic. Measures about 1 inch high by 2 inches deep.

This door lever actuates the latch/switch when the door closes. If it's worn or broken, the appliance may not sense a closed door and won't start. Replacing it restores proper door engagement and safe, reliable operation. What it does:

• Engages the door latch/switch mechanism so the control knows the door is closed
• Helps ensure the unit only runs with the door fully shut
• Replaces cracked, bent, or missing levers that prevent proper door sensing
• Common symptoms: won't start, must hold/push door to run, "door open" indicator stays on

• 1 door lever

• Disconnect power before servicing
• Access the latch/switch area; note the original lever's orientation and any spring
• Transfer and reuse existing hardware if needed; install the new lever in the same position
• Close the door and test for proper start/stop operation

A replacement lid lock striker for top-load washers that engages the lid lock assembly so the washer lid stays securely closed during cycles. Restores safe lid latching and reliable cycle operation when the striker is worn or damaged. What it does:

• Engages with the washer's lid lock to hold the lid closed during wash and spin cycles.
• Prevents the lid from popping open mid-cycle and related cycle-interruption symptoms.
• Helps maintain proper lid alignment to reduce rattling and uneven lid movement.
• Commonly replaced when the lid won't latch, the washer won't start, or the lid rubs against the cabinet.

• Disconnect power to the appliance before attempting any service.
• Access and replacement typically require removing or opening the washer top or access panel; use basic hand tools.
• Align the striker with the lid lock mechanism and secure fasteners snugly; verify smooth engagement before final reassembly.
• If the mating lid lock assembly is damaged or worn, replace the lock and striker as needed for reliable operation.

This lid switch actuator engages the washer's safety switch when the lid is closed so cycles can start and spin as designed. Replace a broken or missing actuator to restore proper lid switch engagement and reliable operation.

• Engages the lid switch when the lid is closed to enable agitation and spin
• A worn, cracked, or missing actuator can cause the washer not to start or to stop before spin
• Intermittent operation that changes when pressing on the lid often indicates misalignment
• Lack of an audible "click" from the lid switch can point to a faulty actuator or alignment

• Disconnect power before servicing; do not work on a live appliance
• Access the lid/switch area per your model's service procedure
• Remove the damaged actuator and install the new part, securing as designed
• Before reassembly, close the lid to ensure the switch clicks and engages properly