Tube Parts

This standpipe adapter connects the washer's drain hose to a household standpipe for a secure, stable fit. It helps ensure proper drainage and reduce leaks or hose movement during operation when installing or refreshing the drain connection.

• Adapts the washer's drain hose for standpipe installations
• Helps keep the hose seated to minimize leaks, kinks, or pull-outs
• Supports a proper air gap to reduce siphoning when installed correctly
• Common symptoms: water at the standpipe, hose popping out, drain-back after a cycle, or improper draining

• Disconnect power and turn off water before working behind the unit.
• Place a towel to catch residual water from the drain hose.
• Slide the adapter onto the hose end, insert into the standpipe, and secure per the manufacturer's instructions.
• Ensure the hose isn't kinked and test a drain/spin cycle to check for leaks.

The Tube Lead is an OEM part for GE refrigerators. It is responsible for routing water through the unit.

Causes of a bad tube lead can include mineral accumulation restricting flow, loosened compression fittings, or cracked/split tubing exposing water to air.

Symptoms of an issue with the water line tube lead include:

• Slow or inconsistent water and ice production
• Water pressure or temperature fluctuations at the dispenser
• Leaks in the refrigerator's exterior bottom panel

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

This drain tube carries defrost water from the evaporator down to the drain pan, helping prevent puddles, leaks, and ice buildup. Replace a cracked, clogged, or missing tube to restore proper drainage and reduce recurring water issues.

• Routes defrost water from the evaporator drain to the drain pan
• Helps prevent water under drawers, on shelves, or on the floor
• Can address ice sheets on the freezer floor from a backed-up drain
• Replace if the tube is split, brittle, kinked, or obstructed

• Unplug the refrigerator and move it to access the rear; remove any back cover as needed
• Clear the drain opening and flush with warm water to remove ice/debris before installing
• Seat the tube fully on the drain outlet and route into the pan; avoid kinks and ensure free flow
• Restore power and check that water drains correctly into the pan

The Drain Hose is an OEM part for Whirlpool dishwashers. It serves as the connection that allows dirty water to exit the dishwasher tub and flow into the water drain system after each wash cycle. The hose transports wastewater from inside the dishwasher out through the standpipe.

Causes of a bad drain hose can include mineral or food debris buildup blocking water flow within the hose, cracks or breaks in the plastic material from repeated bending, or a loose or damaged hose clamp connection.

Symptoms of a drain hose failure include:

• Standing water remaining in the bottom of the tub after a cycle
• Puddles or leaks developing near or underneath the dishwasher
• Water failing to properly drain during the designated drain portion of cycles
• Kinks or sagging appearing in the hose affecting water drainage

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Size: 1/4 inch. Nut for plastic water line.

2 clamps included.

The Dishwasher Duct Assembly is designed to enhance the performance of your Samsung dishwasher. This genuine OEM part ensures a precise fit and reliable functionality, maintaining optimal airflow within your appliance. By replacing a worn or damaged duct assembly, you can restore efficient drying cycles, leading to spotless dishes every time. Crafted from durable materials, this assembly withstands the demands of daily use, providing long-lasting performance. Compatible with a range of Samsung dishwasher models, it guarantees easy installation and seamless integration. Upgrading to this genuine OEM part helps maintain your dishwasherGÇÖs effectiveness, saving you time and ensuring a better cleaning experience. Trust the Dishwasher Duct Assembly to keep your appliance running smoothly and efficiently, delivering the high standards you expect from your Samsung dishwasher.

The Faucet Adapter is an OEM part for GE dishwashers. This adapter connects the dishwasher’s water supply hose to a standard kitchen faucet, allowing the dishwasher to draw water for the wash cycles.  

Causes of a bad faucet adapter can include regular wear and tear, damage from frequent attachment and detachment, or cracks and leaks from improper handling.  

Symptoms of a bad faucet adapter include:

• Water leaking from the connection point
• Difficulty attaching the adapter to the faucet
• Reduced water flow to the dishwasher
• The dishwasher not filling with water properly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Ice maker water line: 1/4x 8ft.

Water line from water valve up to icemaker fill tube.

This water outlet tube routes water within the appliance's water system, maintaining a secure, leak-resistant path to its outlet. Replace a cracked, kinked, or leaking tube to restore proper water flow and prevent leaks. What it does:

• Directs water from internal plumbing to the designated outlet/assembly
• Maintains a sealed connection to help prevent drips and leaks
• Typical failure symptoms: water leaking inside or onto the floor; weak or no water flow; visible cracks, kinks, or a loose fit at connections

• 1 water outlet tube

• Disconnect power and shut off the water supply before servicing
• Note tube routing and connection points; remove any clips/fasteners as needed and pull the old tube free
• Fully seat the new tube into each port; ensure any existing seals or clips are positioned correctly
• Run a short test cycle and check all joints for leaks

This refrigerator water tube carries fresh water between the valve, reservoir, dispenser, and/or ice maker. Replacing a cracked or kinked tube restores proper water flow and helps stop leaks inside or behind the refrigerator.

• Directs pressurized water between components in the refrigerator's water system
• Common failure signs: leaks, visible cracking, kinks, or pinhole sprays
• May cause no or slow dispenser flow, or an ice maker that doesn't fill
• Restores correct routing after tubing becomes brittle or damaged with age

• Unplug the refrigerator and shut off the household water supply before servicing
• Place a towel under connections and dispense water to relieve line pressure
• Depress quick-connect collars or loosen clamps to remove the old tube; route the new tube exactly like the original
• Fully seat tubing in fittings, perform a gentle tug test, restore water, check for leaks, and flush several cups to clear air

This drain hose carries water away from your appliance during draining to help prevent backups and leaks. Replace a cracked, clogged, or kinked hose to restore reliable water removal and protect surrounding floors and cabinets. What it does:

• Directs drain water from the outlet or pump to the designated discharge point
• Maintains proper flow; kinks or blockages can cause slow or no draining
• Helps prevent leaks from splits, pinholes, or loose connections
• Common signs: standing water, water under/around the unit, drain-related error codes, or odors

• Includes 1 drain hose

• Disconnect power and shut off water supply before servicing
• Place towels or a shallow pan to catch residual water when removing the old hose
• Note the original routing; seat connections fully, secure with clamps, and avoid sharp bends or kinks
• Run a brief drain/rinse and check all joints for leaks

This refrigerator water leakage repair kit improves defrost drain heat transfer and routing so meltwater can flow to the drain tube. It helps reduce water pooling or ice sheets in the fresh food section from a frozen or restricted drain. What it does:

• Directs heat toward the drain opening to help prevent ice buildup that blocks drainage
• Promotes proper meltwater flow from the evaporator area into the drain tube
• Often installed to address water/ice on the bottom of the refrigerator compartment or puddles on the floor after defrost
• Helps reduce recurring defrost drain freeze-ups and overflows

• One water leakage repair kit

• Disconnect power and turn off the water supply before servicing
• Empty the compartment and remove shelves/drawers, then take off the rear evaporator cover to access the drain
• Clear all ice and debris from the drain and drain tube before installing the kit
• Install components exactly as directed for your model and water drains freely before reassembly

This hose connector joins an appliance hose to its mating port for a secure, leak-resistant connection. Replace a cracked or loose connector to stop drips at the joint and restore reliable flow through the line.

• Provides a secure coupling between a hose and an appliance fitting or another hose
• Helps maintain a tight seal to prevent leaks at the connection point
• Supports proper flow during fill, circulation, or drain operations
• Helps resolve issues such as dripping at the joint, a hose that won't stay attached, visible cracking, or intermittent fill/drain performance

• Disconnect power and, if applicable, shut off the water supply before servicing
• Place towels to catch residual liquid and relieve line pressure
• Transfer and tighten clamps or O-rings per your model; seat hoses fully on the connector
• Run a short test and inspect for leaks before returning the appliance to service

The Manifold is an OEM part for Whirlpool dishwashers. It is responsible for providing water supply to the spray arms during the wash and rinse cycles. It provides proper distribution of water throughout the dishwasher, allowing for thorough cleaning of your dishes. It connects the main water supply line to various parts within the dishwasher, ensuring a consistent flow of water.

A bad manifold can occur due to wear and tear, clogs, or damage to the tubing. If you notice symptoms such as reduced water flow, leaks, or improper cleaning results, it may be time to replace the water supply tube manifold.

Symptoms of a bad manifold include:

• Reduced water flow during the wash cycle
• Leaks or drips from the manifold area
• Improper cleaning or rinsing results

Repair your dishwasher by replacing the faulty or worn-out water supply tube manifold with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.