Admiral Circuit Breaker Wok Parts

Best Seller

Genuine Whirlpool part

Admiral Flame Sensor

By: Whirlpool

Part Number: WP338906

The Flame Sensor is an OEM replacement part for Whirlpool gas dryers. This component plays a critical safety role by monitoring the presence of the gas burner flame during the drying cycle.

Causes of needing to replace the flame sensor can include normal wear and tear over extended use, exposure to high temperatures or corrosion, or physical damage to the sensor itself.

Symptoms that may indicate a faulty flame sensor include:

The dryer not heating or producing heat properly
Error codes related to the gas system or ignition failure
The dryer shutting off unexpectedly during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models.

This part fixes the following symptoms

Shuts off too soon
No heat or not enough heat
Takes too long to dry

Do-It-Yourself Stories from Customers like You 11 year old kenmore elite gas drye stopped working initial diagnosis: burner would light but would shut off in 3 or 4 minutes Jay W. • Dallas , TX • April 05, 2015

I used Fixya as an initial source describing my problem. I got two responses which were very helpful. One that the "coils" were probably the problem. Two, that the problem could be the thermostat or a thermistor in the dryer. I verified that AC was coming from the timing control, that both the two terminal and three terminal coils,the igniter and shut off thermostat all had continuity. I then applied AC directly to the coils: the two terminal coil ""clanked" and I interpreted that as the coil... Read more

$34.95

Compare At:: $41.59
You Save:: $6.64

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Hi-Limit Thermostat

4.9 (104)

By: Whirlpool

Part Number: WP303396

The Hi-Limit Thermostat is an OEM replacement part for Whirlpool gas dryers. As a safety device, it monitors internal drum temperatures during cycles to prevent overheating. If the temperature rises to 200 degrees Fahrenheit, the heating element will cut off. It will resume operation once the temperature drops to 170 degrees Fahrenheit. Featuring two (2) male 1/4" terminals, this thermostat is designed for flush mount installation. Its electric dryer hi-limit thermostat is rated at L200-30F

Causes of a bad hi-limit thermostat can include exposure to excessive temperatures over an extended period. Failure to safely vent moist air outside may cause thermal expansion cutting off electrical control.

Symptoms of a bad hi-limit thermostat include:

Inability to complete dryer cycles or premature shutoffs
Flashing error codes or indicators related to heat
Sudden lack of heat even when dryer functions normally
Tripping of household circuit breakers during drying

This OEM part is also compatible with brands like Maytag, Amana, and Kenmore models. Replace yours to ensure thermal safety.

This part fixes the following symptoms

Too hot
No heat or not enough heat
Takes too long to dry

Do-It-Yourself Stories from Customers like You Dryer was functional but not heating up John M. • Pompton Lakes , NJ • September 10, 2016

Replaced the thermostat and fuse it could have been either of them that was causing the issue - and now it works like a charm. Read more

$29.95

Compare At:: $40.86
You Save:: $10.91

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Thermal Fuse

5.0 (21)

By: Whirlpool

Part Number: WP307473

The Thermal Fuse is an OEM part for Whirlpool dryers. This safety device protects the dryer from overheating by cutting off power if the dryer exceeds a certain temperature. It is crucial for maintaining safe operation and preventing potential fire hazards. This thermal fuse has 1/4-inch terminals and operates around 243 degrees F.

Causes of a bad thermal fuse include lint buildup causing overheating, blocked ventilation, or a malfunctioning thermostat. These issues can lead to the fuse blowing to prevent further damage or risk.

Symptoms of a bad thermal fuse include:

Dryer not starting
No heat in the dryer
Dryer shutting off mid-cycle
The dryer running but not heating

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Catastrophic failure of the dryer cycling thermostat in a maytag neptune super stack Richard M. • Cornish , NH • October 19, 2020

Through 15 years of vibration, the Cycling Thermostat evidently had degraded to the point where one electrical connection or more came loose and caused a short. There is also a possibility that the Bakelite section of the Dryer Cycling Thermostat body separated from the metal base, simultaneously exposing all four connections to a short. The thermostat literally exploded into chunks and dust. There was a heavy arcing and then, thankfully, the thermal fuse blew and shut down power to the short... Read more

$47.95

Compare At:: $56.58
You Save:: $8.63

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Thermal Fuse

4.9 (15)

By: Whirlpool

Part Number: WP306604

The Thermal Fuse is an OEM replacement part for Whirlpool dryers. This safety device monitors and protects heating elements inside the dryer. If temperatures rise too high due to a blockage or other issue, the fuse automatically opens the electrical circuit to cease further heating.

Symptoms of a bad thermal fuse include:

Dryer failing to heat or stay warm during cycles
Fluctuating or inconsistent heat levels
Tripped circuit breakers after drying

Causes of failure involve wear or damage from years of high heat exposure. Over time, components become brittle and less responsive.

This OEM Whirlpool replacement is also compatible with some Kenmore, Admiral, Roper, and Estate dryer models.

This part fixes the following symptoms

Won't start
No heat or not enough heat

Do-It-Yourself Stories from Customers like You Maytag gas dryer was not heating Christopher P. • Los Angeles , CA • October 04, 2014

Did some dryer repair research (dryer not heating) on the internet. Bought an ohm meter, opened up the dryer and tested the cut-off-T, high limit thermostat, dryer igniter, flame sensor, cycling thermostat for continuity. The igniter was bad, the other parts tested ok. Went online to AppliancePartsPros.com searched for a new igniter for my specific dryer model, found the right replacement igniter and watched the video on how to replace the igniter. Because my dryer is old (15+ years) and I... Read more

$28.95

Compare At:: $34.45
You Save:: $5.50

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Internal-Bias Thermostat (Dryer)

5.0 (6)

By: Whirlpool

Part Number: WP3387137

This internal-bias thermostat regulates dryer drum temperature by cycling the heat on and off, helping maintain consistent drying performance and protect against overheating.

Controls the cycling temperature of the heating circuit to prevent underheating or overheating
Helps resolve symptoms like no heat, not enough heat, long dry times, or temperature swings
A faulty thermostat may cause overheating that can trip the thermal fuse
Located on the blower housing on many models

What's included: 1 internal-bias thermostat Install notes:

Disconnect power and shut off gas (for gas dryers) before servicing
Access the blower housing; note wire positions and transfer one at a time
Mount the thermostat flush to the housing for proper sensing
After installation, run a test cycle to verify proper heating

This part fixes the following symptoms

Too hot

Do-It-Yourself Stories from Customers like You Thermal fuse blew John P. • Palm Coast , FL • January 02, 2016

Cleaned exhaust duct, but only from the dryer/laundry room side. Replaced thermal fuse. Unit worked for about two loads and thermal fuse blew again. This time I cleaned the exhaust vent on the roof of my 2-story house. It was found to be partially obstructed and I was able to remove a significant amount of lint from it. Also, I researched the problem and followed someone's advice to replace the cycling thermostat together with the thermal fuse if the thermal fuse blows. So far it has been... Read more

$56.40

Compare At:: $67.12
You Save:: $10.72

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Admiral Glass Cooktop Scraper

4.5 (2)

By: Whirlpool

Part Number: WA906B

Razor blade scraper.

Do-It-Yourself Stories from Customers like You Cracked glass top on our cooktop David H. • Yorktown , VA • April 30, 2017

Remove unit, remove about 12 screw holding the top to the unit switch the tops reverse steps and done Read more

$8.95

Compare At:: $10.65
You Save:: $1.70

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Admiral Fuse (250V, 1A)

5.0 (2)

By: Whirlpool

Part Number: WP22001555

This 250V, 1A fuse protects your washer's control circuit from overcurrent. Replacing it can restore control power once the root cause is corrected.

Opens to protect electronics when current exceeds its 1A rating
Check this part if the washer has no power, the control panel is dead, or it won't start
A blown fuse will test open for continuity
Repeated failure points to an underlying short or component fault that must be fixed

What's included: 1 fuse

Disconnect power before servicing
Access the fuse at the control board or fuse holder
Replace only with the same rating: 1A, 250V
Inspect wiring/components and correct any short before restoring power

Do-It-Yourself Stories from Customers like You Lid switch washer Michael D. • Ambler , PA • November 03, 2014

Lid switch problem. Easy to fix, not so easy to diagnose. First thing to look at if something goes wrong and there does not appear to overtly be mechanical issue like pump, etc. Read more

$21.77

Compare At:: $25.91
You Save:: $4.14

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Admiral Fuse (15A, 250V)

By: Whirlpool

Part Number: WPY01050009

This 15 amp, 250 volt replacement fuse protects your appliance's electrical circuits by interrupting power when a fault or overload occurs. It restores safe operation once the underlying issue is fixed and the fuse is replaced. What it does:

Acts as an overcurrent protection device for circuits rated up to 15 A and 250 V
Prevents damage to wiring and components by opening the circuit during an overload or short
Common symptom: appliance has no power or specific functions stop working after a sudden failure
Replacing a blown fuse can resolve intermittent power loss or complete power failure tied to a single blown element

What's included: One 15A 250V fuse (single unit) Install notes:

Disconnect power to the appliance before inspecting or replacing the fuse
Replace only with a fuse of the same amperage and voltage rating to maintain safety and proper protection
Use insulated tools and avoid touching live terminals; internal access may require disassembly, follow OEM service instructions
If fuses blow repeatedly, stop using the appliance.

$12.72

Compare At:: $15.01
You Save:: $2.29

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Admiral High-Limit Thermostat (Hi-Limit Switch)

4.0 (1)

By: Whirlpool

Part Number: WP7403P316-60

This high-limit thermostat (hi-limit switch) is a temperature safety device that stops the heating circuit if the appliance overheats, helping protect the unit and restore proper heat control when replaced. What it does:

Opens the heating circuit if internal temperature exceeds safe limits to prevent overheating.
Controls whether the heater/element receives power based on temperature.
When faulty, common symptoms include no heat or intermittent heating and repeated thermal cutouts.
Can be tested for continuity to confirm electrical function.

What's included:

One high-limit thermostat (hi-limit switch).

Install notes:

Disconnect power before inspecting or replacing; risk of shock or injury if energized.
Note and label wire locations or take a photo before removal for correct reassembly.
Verify part compatibility with your model before installing; confirm continuity after installation.

Do-It-Yourself Stories from Customers like You Older maytag oven would not heat up past 250 degrees John T. • American Fork , UT • March 17, 2020

The same thing happened about two years ago and when I took off the back cover, the high limit switch was melted and crumbling, so I replaced it and it's worked fine until a couple of weeks ago. We smelled a stinky electrical burning smell a couple of times and then it stopped heating past 250 degrees. Turns out the high limit switch was crumbling again. This time I replaced both the high limit switch and the bottom element and it heats up again like it should to any temperature. One of the... Read more

$99.95