Dr30gs/Ng Parts

This temperature sensor monitors the appliance's internal temperature and relays accurate readings to the control, helping maintain the set temperature. Replacing a failed sensor can resolve temperature-related errors and restore consistent, reliable heating performance.

• Senses cavity temperature and sends a signal to the control to regulate heat output
• Helps maintain target temperature during cooking cycles
• Common failure symptoms: inaccurate temperatures, won't reach or overshoots set temp, intermittent heating, or temperature-related error codes
• Can cause long heat-up times or premature shutdown when failing

• Disconnect power at the breaker/fuse and allow the unit to cool completely
• Access location varies by model; the sensor is typically mounted to the cavity wall or accessible from the rear panel
• Remove mounting screw(s), unplug the connector, and install the new sensor; transfer any bracket/seal if present
• Route leads clear of hot or moving parts and do not overtighten the mounting screw

The 12 Volt Halogen Bulb is an OEM replacement part for Samsung ranges and wall ovens. It is a specialized lighting component designed to illuminate the oven cavity, providing clear visibility and ensuring accurate monitoring of the cooking process.

Causes of a bad halogen bulb can include normal burnout over time, exposure to moisture, or damage due to impact. Electrical surges can also shorten the lifespan of the bulb.

Symptoms of a bad 12 Volt Halogen Bulb include:

• The light not turning on
• Flickering or dim light
• Intermittent lighting issues
• Blackened or broken bulb

This OEM Samsung part ensures compatibility and reliable performance for your appliance.

This re-ignition module controls spark for gas surface burners and automatically re-sparks if the flame goes out, helping burners ignite consistently and stay lit when the original module has failed. What it does:

• Sends high-voltage pulses to the burner igniters to light gas
• Provides re-ignition if a burner flame is extinguished
• Distributes spark output to multiple burners as designed
• Common failure symptoms: no spark on all or most burners, continuous clicking, or intermittent ignition across burners

• 1 re-ignition module

• Disconnect electrical power at the breaker and shut off gas supply before servicing
• Access location varies by model; remove rear cover or top as required
• Label and transfer each wire one at a time; mount the module securely and route wires away from heat
• After installation, test each burner for proper ignition and that clicking stops once flame is established

This is a replacement cooling fan assembly designed to restore airflow in the refrigerator condenser/vent area for stable temperatures and improved efficiency. Fits service replacement applications where the original fan is damaged or fails. What it does:

• Circulates air across condenser/evaporator components to help maintain proper cooling
• Reduces overheating by improving airflow through heat-exchange areas
• Stops symptoms such as weak cooling, warm spots, or a non-spinning fan
• Helps eliminate abnormal fan noise when the motor or blades are failing

• Disconnect power to the appliance before any service to avoid shock or injury
• Access may require removing panels or shelving; keep fasteners and clips for reassembly
• Handle the fan blades and motor carefully to avoid bending or damage
• If wiring connectors or mounts are worn, replace or secure them during installation

This O-ring seals the igniter assembly to prevent gas or air leaks and help ensure reliable ignition performance. It's a small replacement seal used when the original is worn, cracked, or missing. What it does:

• Creates a tight seal around the igniter assembly to reduce leaks
• Helps maintain proper ignition performance by keeping components sealed
• Commonly replaced if brittle, cracked, flattened, or after igniter service
• Small, inexpensive part that protects nearby components from gas or moisture exposure

• One O-ring (igniter) as pictured

• Turn off gas and power to the appliance before servicing
• Replace only with the exact O-ring size for your igniter to ensure a proper seal
• Inspect surrounding gaskets and components and replace if damaged

The Riding Mower Halogen Light Transformer is essential for maintaining the lighting system of your rear-engine riding mower. This genuine OEM part ensures your mower's halogen lights receive consistent and reliable power, providing bright illumination for safer operation during early mornings or late evenings. Designed specifically for compatibility with a variety of rear-engine riding mower models, this transformer guarantees a secure fit and straightforward installation process. Using the Riding Mower Halogen Light Transformer means you can easily replace a faulty or damaged transformer, restoring the full functionality of your mowerGÇÖs lighting system. This not only enhances visibility but also contributes to the overall safety and efficiency of your mowing tasks. By choosing this genuine OEM part, you ensure the highest quality and durability, reflecting SamsungGÇÖs commitment to reliable performance. Keep your riding mower in top condition and enjoy a better mowing experience with this dependable halogen light transformer.

This blue indicator light restores the appliance's status illumination in the control area. Replace it if the original light is dim, flickering, or no longer illuminates so you can quickly see when a function is active.

• Provides a blue visual indication of operation/status on the control panel
• Helps at a glance when a feature is on
• Common fix for a light that won't turn on, is dim, flickers, or is physically damaged
• Direct-fit service part designed to connect to the original wiring and mounting points

• Disconnect power at the breaker or unplug the appliance before service
• Allow nearby surfaces and components to cool
• Access the indicator light from the control area; remove panels as needed
• Move connectors one at a time and route wiring as originally installed; test before reassembly

This convection element kit replaces the oven's convection heating element to restore even heat for baking and roasting. Use it when the convection system no longer produces consistent hot air or the oven bakes unevenly. What it does:

• Heats air for the oven's convection cooking mode so the fan can circulate consistent temperature.
• Restores even browning and predictable bake/roast results when the convection element has failed.
• Common symptom indicator: uneven baking or roasting, or visible damage to the element.
• Can be part of repairs when the oven does not reach expected results in convection mode.

• Disconnect power at the breaker before starting any repair — electric shock hazard.
• Access typically requires removing the oven cavity back panel or inner rear panel; use proper tools and follow OEM instructions.
• Inspect wiring terminals and insulation; replace connectors that are corroded or damaged.

This thermal cut-off switch is a high-temperature safety device that interrupts power if the appliance overheats. Replacing a failed cutout restores proper overheat protection and can help address no-heat or shutdown issues caused by an open safety circuit.

• Monitors temperature at its mounting location and opens the circuit if temperatures exceed a safe limit
• A failed/open cutout can cause no heat, intermittent heating, or the unit shutting off during use
• Helps protect components from damage due to overheating
• Location varies by model; typically mounted to a bracket or surface near a heat source

• Disconnect power at the breaker or unplug the appliance before servicing
• Note wire orientation and transfer leads one at a time to the new switch
• Mount in the original position with firm, flush contact for accurate temperature sensing
• After replacement, inspect airflow/venting and nearby fans/filters to address any underlying overheating causes

The Halogen Light Assembly is an OEM part for Samsung ovens. It provides illumination within the oven cavity, allowing you to easily monitor the cooking progress of your dishes.

A bad halogen light assembly can be caused by electrical issues, component failure, or damage to the bulb or socket. When the light assembly malfunctions, it can result in a range of problems, such as no light being emitted, flickering light, or the bulb not turning on at all.

Symptoms of a bad halogen light assembly include:

• No light emitted from the oven cavity
• Flickering light or poor illumination
• Bulb not turning on when the oven is in use
• Error codes displayed on the control panel

Replace your faulty halogen light assembly with this genuine OEM part to restore your oven. This Samsung part can also be used on Kenmore/Sears appliances. 
 

This outer surface burner cap replaces a damaged or missing cap to protect the burner head and help restore proper flame distribution for consistent cooking. Designed for the outer burner position on compatible Samsung gas ranges and cooktops. What it does:

• Covers the burner head to help shape the flame and protect internal burner components.
• Restores more even heating when the outer cap is cracked, chipped, warped, or missing.
• Helps keep food, grease and spills out of the burner head and igniter area.
• Reduces uneven flames and intermittent ignition caused by a poorly seated or damaged cap.

• Turn off the appliance and gas supply and allow all parts to cool completely before handling.
• Lift the old cap straight up from the burner head; place the replacement cap aligned over the burner post until it sits flat.
• No special tools typically required; inspect the burner head and igniter for debris and clean if needed.

This replacement burner cap fits the 15K burner to restore proper flame shape and help even heat distribution on compatible Samsung gas ranges. It replaces a damaged or missing cap to improve ignition and burner performance. What it does:

• Covers the burner head and helps direct the gas flow for a stable, even flame.
• Protects burner ports from food debris and corrosion that can disrupt ignition.
• Helps reduce uneven cooking and noisy or sputtering flames caused by a damaged cap.
• Use when the cap is cracked, warped, missing, or no longer seats correctly on the burner head.

• Turn off the stove and allow all components to fully cool before servicing.
• Remove the grates and lift the old cap straight off the burner; seat the new cap squarely over the burner head.
• No special tools are typically required, but avoid forcing the cap into place.

This wafer head screw secures panels, brackets, and other components inside your appliance. Replacing worn or missing hardware restores a tight fit, reduces vibration and rattles, and keeps assemblies properly aligned for reliable performance.

• Fastens panels, brackets, or trim with a low-profile wafer head for even clamping
• Replaces stripped, corroded, or missing hardware (#8 x 3/8)
• Helps maintain alignment and reduce vibration or rattling noises
• Restores secure mounting for safe, stable operation

• Disconnect power; also shut off gas before servicing
• Support the panel or component while removing/installing hardware
• Hand-start threads to avoid cross-threading; tighten snugly without overtightening
• Replace screws one at a time to maintain alignment

This replacement burner cap restores the protective top for a gas cooktop burner, helping maintain proper flame shape and more consistent heat distribution for everyday cooking. Use when a cap is cracked, chipped, or missing. What it does:

• Sits on the burner head to protect the burner and shape the flame for even heat
• Helps promote reliable ignition and steady flame performance
• Replace if the cap is warped, cracked, or causing the flame to burn unevenly
• Matches the OEM service part designed for direct replacement on compatible gas ranges

• Turn off the appliance power and gas supply before servicing.
• Remove grates and lift off the old cap; set the new cap flat on the burner head so it seats evenly.

This broil element is the heating element that provides high-heat broiling at the top of the oven cavity, restoring even browning and broil performance. Replace a damaged element to regain consistent broiling and oven heat. What it does:

• Generates the high, direct heat used for broiling foods near the top of the oven
• Heats quickly to produce browned, crisped surfaces for broiling and finishing
• Commonly replacement for ovens that fail to broil or produce weak/no top-heat
• Helps eliminate uneven cooking when the element is visibly burned, broken, or showing hotspots

• One broil element (3100W)

• Disconnect power to the range before service to avoid shock hazard
• Wear gloves to protect hands from sharp edges; handle the element carefully
• Installation typically requires removing the oven back or top panel to access element terminals
• Verify electrical connections are secure and that the element is the correct fit for your oven before final reassembly

This service burner gasket seals the burner assembly to the cooktop, restoring a proper seal to help stabilize flames and improve ignition reliability. Use it to replace worn or damaged gaskets on compatible Samsung gas cooktops. What it does:

• Seals the burner-to-cooktop gap to help prevent gas leaks and keep burner components aligned.
• Helps maintain consistent flame shape and heat for more even cooking.
• Can reduce symptoms like sputtering or uneven flames, difficulty igniting, or visible gaps around the burner.
• Fits the specified burner assembly and restores intended burner performance when the existing gasket is cracked, torn, or compressed.

• Turn off the appliance and shut off the gas supply before attempting any service.
• Remove the burner cap and head per the appliance's service instructions; seat the gasket fully around the burner base.
• Inspect surrounding components (burner head, screws, mounting surface) and replace any damaged parts.