Er-36D-C-5Ch Parts

This temperature sensor monitors the appliance's internal temperature and relays accurate readings to the control, helping maintain the set temperature. Replacing a failed sensor can resolve temperature-related errors and restore consistent, reliable heating performance.

• Senses cavity temperature and sends a signal to the control to regulate heat output
• Helps maintain target temperature during cooking cycles
• Common failure symptoms: inaccurate temperatures, won't reach or overshoots set temp, intermittent heating, or temperature-related error codes
• Can cause long heat-up times or premature shutdown when failing

• Disconnect power at the breaker/fuse and allow the unit to cool completely
• Access location varies by model; the sensor is typically mounted to the cavity wall or accessible from the rear panel
• Remove mounting screw(s), unplug the connector, and install the new sensor; transfer any bracket/seal if present
• Route leads clear of hot or moving parts and do not overtighten the mounting screw

The 12 Volt Halogen Bulb is an OEM replacement part for Samsung ranges and wall ovens. It is a specialized lighting component designed to illuminate the oven cavity, providing clear visibility and ensuring accurate monitoring of the cooking process.

Causes of a bad halogen bulb can include normal burnout over time, exposure to moisture, or damage due to impact. Electrical surges can also shorten the lifespan of the bulb.

Symptoms of a bad 12 Volt Halogen Bulb include:

• The light not turning on
• Flickering or dim light
• Intermittent lighting issues
• Blackened or broken bulb

This OEM Samsung part ensures compatibility and reliable performance for your appliance.

This LED socket assembly restores the high-intensity indicator lighting used on select cooktops to show an active cooking zone. Replace a failed module to bring back clear, consistent illumination. What it does:

• Provides bright LED illumination for a cooking zone indicator
• Restores visual feedback that a burner/zone is in use
• Replaces a failed or damaged LED socket/module
• Common symptoms: no light, dim or flickering light, intermittent operation, or physical damage

• One LED socket assembly

• Disconnect power at the breaker before servicing
• Allow the appliance to cool and protect the glass surface while working
• Access the module from beneath the cooktop; match connector orientation and mounting position
• Test illumination before final reassembly

This O-ring seals the igniter assembly to prevent gas or air leaks and help ensure reliable ignition performance. It's a small replacement seal used when the original is worn, cracked, or missing. What it does:

• Creates a tight seal around the igniter assembly to reduce leaks
• Helps maintain proper ignition performance by keeping components sealed
• Commonly replaced if brittle, cracked, flattened, or after igniter service
• Small, inexpensive part that protects nearby components from gas or moisture exposure

• One O-ring (igniter) as pictured

• Turn off gas and power to the appliance before servicing
• Replace only with the exact O-ring size for your igniter to ensure a proper seal
• Inspect surrounding gaskets and components and replace if damaged

This is a bake igniter assembly used to light the oven's gas burner so the oven can reach and maintain set temperatures. It replaces a worn or failed igniter to restore reliable baking and roasting performance. What it does:

• Provides the heat source to ignite the oven's bake burner so the oven can heat properly
• Allows the oven to reach set temperatures; a weak or failed igniter can cause slow heating or no heat
• Helps establish a consistent flame for stable oven operation
• Works as the replacement assembly for the oven's bake ignition system

• Disconnect power and gas supply before attempting service
• Handle the igniter carefully; the element is fragile and can be damaged by rough handling
• Use proper tools and follow the oven manufacturer's service instructions for safe installation

The Riding Mower Halogen Light Transformer is essential for maintaining the lighting system of your rear-engine riding mower. This genuine OEM part ensures your mower's halogen lights receive consistent and reliable power, providing bright illumination for safer operation during early mornings or late evenings. Designed specifically for compatibility with a variety of rear-engine riding mower models, this transformer guarantees a secure fit and straightforward installation process. Using the Riding Mower Halogen Light Transformer means you can easily replace a faulty or damaged transformer, restoring the full functionality of your mowerGÇÖs lighting system. This not only enhances visibility but also contributes to the overall safety and efficiency of your mowing tasks. By choosing this genuine OEM part, you ensure the highest quality and durability, reflecting SamsungGÇÖs commitment to reliable performance. Keep your riding mower in top condition and enjoy a better mowing experience with this dependable halogen light transformer.

This inner burner cap for an 18K burner sits over the burner head to shape the flame and shield the ports. Replacing a worn or missing cap restores stable flames, reliable ignition, and consistent cooking performance. What it does

• Positions over the 18K burner head to concentrate and stabilize the flame
• Helps protect burner ports from spills and debris
• Proper seating supports quick, consistent ignition
• Common symptoms of a bad or misaligned cap include uneven or yellow flames, poor simmering, or continuous clicking without ignition

• One inner burner cap

• Turn off gas and power; allow the cooktop to cool completely
• Remove the old cap; clean and dry the burner head and ports
• Set the new inner cap flat and centered on the burner; do not force
• Test ignition and adjust cap position if the flame is uneven or noisy

This outer surface burner cap replaces a damaged or missing cap to protect the burner head and help restore proper flame distribution for consistent cooking. Designed for the outer burner position on compatible Samsung gas ranges and cooktops. What it does:

• Covers the burner head to help shape the flame and protect internal burner components.
• Restores more even heating when the outer cap is cracked, chipped, warped, or missing.
• Helps keep food, grease and spills out of the burner head and igniter area.
• Reduces uneven flames and intermittent ignition caused by a poorly seated or damaged cap.

• Turn off the appliance and gas supply and allow all parts to cool completely before handling.
• Lift the old cap straight up from the burner head; place the replacement cap aligned over the burner post until it sits flat.
• No special tools typically required; inspect the burner head and igniter for debris and clean if needed.

This service door window pack replaces a damaged or worn microwave/oven door window to restore visibility and proper sealing. It provides the visible glass assembly used in the appliance door for safe operation and viewing. What it does:

• Replaces cracked, scratched, foggy or broken door window glass
• Restores clear viewing of the cooking cavity for monitoring food
• Helps maintain the door seal and proper operation when installed correctly
• Prevents potential heat/light leakage caused by damaged window components

• One door window service pack

• Disconnect power before beginning any door repairs to avoid shock or injury
• Handle glass components with care and wear cut-resistant gloves
• Ensure all retained clips/gaskets are reinstalled and the window is seated per OEM alignment

This wafer-head Phillips screw (#8 x 3/8 in) is a factory fastener used to secure panels, brackets, and covers in compatible appliances. Replace a missing or damaged screw to restore a tight, properly aligned fit. What it does:

• Secures sheet-metal or plastic components to the appliance chassis or subassemblies
• Helps maintain proper alignment and reduce vibration or rattling
• Replaces lost, stripped, or corroded screws of the same size and type
• Used at panel, bracket, and cover mounting points designed for this fastener

• One wafer-head Phillips screw (#8 x 3/8 in)

• Disconnect power (and gas, if applicable) before servicing
• Start threads by hand to avoid cross-threading; use a #2 Phillips driver
• Do not overtighten, especially into plastic or thin sheet metal
• Replace only with the same size/type fastener removed to ensure proper fit

A single aluminum low-pressure service valve that provides a sealed access point for refrigerant charging, evacuation and pressure checks. Designed to restore proper serviceability for refrigeration and sealed-system maintenance. What it does:

• Provides a dedicated, sealed port for connecting gauges and service equipment to the low-pressure side of the refrigeration system.
• Allows safe charging, evacuation and pressure testing during diagnostics and repairs.
• Helps isolate and reseal the system after service to prevent refrigerant leaks.
• Commonly used when a refrigerator or freezer needs refrigerant service or pressure verification.

• Intended for experienced technicians; refrigerant work should follow all local regulations and EPA/other certification requirements.
• Depressurize and recover refrigerant before removing or replacing the valve.
• Inspect and replace any sealing O-rings, fittings or gaskets as needed; torque to OEM specifications.
• Test for leaks and proper operation before returning the appliance to service.

This single aluminum service valve is a sealed-system access valve used on compatible refrigeration systems to allow safe service, pressure checks and refrigerant charging. It provides a reliable access point without replacing major components. What it does

• Provides a sealed access point for refrigerant charging, pressure testing and diagnostic service
• Helps isolate the refrigerant line during repairs or evacuation
• Reduces the need to disturb larger sealed-system components when performing service
• Commonly used when addressing pressure/charge-related symptoms or performing routine diagnostics

• One single aluminum service valve

• Follow all refrigerant-handling regulations and use proper recovery equipment
• Depressurize the system and verify zero pressure before removing or installing the valve
• Inspect fittings and gaskets for damage and replace as needed to ensure a proper seal

This convection oven motor drives the oven's convection fan to circulate hot air for even cooking. Designed as a direct replacement service motor to restore proper airflow and heating performance in compatible Samsung ovens. What it does:

• Spins the convection fan to circulate hot air for more even baking and roasting
• Helps maintain consistent oven temperature by improving air circulation
• Can address symptoms like uneven cooking, hot spots, or a noisy/non-spinning convection fan
• Matches OEM form and mounting for a straightforward replacement when compatible

• One convection oven service motor

• Disconnect power to the appliance before starting any repair
• Handle with care; verify connector and mounting orientation before final assembly
• Wear gloves and eye protection; avoid contact with sharp sheet metal and heating elements

The Electric Wall Oven Rubber Bumper is essential for maintaining the smooth operation of your Samsung electric wall oven. This genuine OEM part ensures a secure and quiet fit between the oven components, reducing vibrations and preventing wear over time. Crafted from durable materials, the rubber bumper effectively absorbs shocks, enhancing the longevity of your appliance. Installing this rubber bumper helps maintain the precise alignment of your oven door, ensuring it closes properly and operates efficiently. Designed specifically for Samsung electric wall ovens, this part guarantees a perfect fit and easy installation. By replacing a worn or damaged bumper with the Electric Wall Oven Rubber Bumper , you can restore your ovenGÇÖs functionality and enjoy a reliable cooking experience. Trust in this genuine OEM part to provide the quality and performance you expect from your Samsung appliance.

This Torx-head service screw replaces a missing or damaged #10-32 x 2 inch screw used to secure appliance panels and components, restoring proper fit and reducing noise from loose parts. What it does:

• Secures panels, brackets or service access covers to restore proper alignment
• Prevents rattling, vibration noise and movement caused by loose fasteners
• Replaces stripped, bent or missing service screws for safe operation
• Matches OEM thread size and length for a correct fit when listed for your model

• Use the correct Torx driver and proper-sized socket or bit to avoid cam-out
• Tighten until snug; do not overtighten to prevent stripping threads or damaging panels
• Disconnect power and follow manufacturer safety guidance before accessing internal components

This is a replacement service screw used to secure panels and small components in compatible Samsung appliances. It restores proper fastening where a worn, damaged, or missing screw leaves parts loose. What it does

• Replaces a missing or stripped M4 x 12 mm machine screw to secure panels, brackets, or assemblies
• Stops rattling or vibration caused by loose fasteners
• Helps maintain proper alignment of small service panels and components
• Suitable where an A2 (stainless) screw is required for corrosion resistance

• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent thread damage
• Disconnect power to the appliance before servicing nearby electrical components
• Keep small parts away from children and collect any dropped screws to avoid damage