Er36dsch Parts

This temperature sensor monitors the appliance's internal temperature and relays accurate readings to the control, helping maintain the set temperature. Replacing a failed sensor can resolve temperature-related errors and restore consistent, reliable heating performance.

• Senses cavity temperature and sends a signal to the control to regulate heat output
• Helps maintain target temperature during cooking cycles
• Common failure symptoms: inaccurate temperatures, won't reach or overshoots set temp, intermittent heating, or temperature-related error codes
• Can cause long heat-up times or premature shutdown when failing

• Disconnect power at the breaker/fuse and allow the unit to cool completely
• Access location varies by model; the sensor is typically mounted to the cavity wall or accessible from the rear panel
• Remove mounting screw(s), unplug the connector, and install the new sensor; transfer any bracket/seal if present
• Route leads clear of hot or moving parts and do not overtighten the mounting screw

The 12 Volt Halogen Bulb is an OEM replacement part for Samsung ranges and wall ovens. It is a specialized lighting component designed to illuminate the oven cavity, providing clear visibility and ensuring accurate monitoring of the cooking process.

Causes of a bad halogen bulb can include normal burnout over time, exposure to moisture, or damage due to impact. Electrical surges can also shorten the lifespan of the bulb.

Symptoms of a bad 12 Volt Halogen Bulb include:

• The light not turning on
• Flickering or dim light
• Intermittent lighting issues
• Blackened or broken bulb

This OEM Samsung part ensures compatibility and reliable performance for your appliance.

This re-ignition module controls spark for gas surface burners and automatically re-sparks if the flame goes out, helping burners ignite consistently and stay lit when the original module has failed. What it does:

• Sends high-voltage pulses to the burner igniters to light gas
• Provides re-ignition if a burner flame is extinguished
• Distributes spark output to multiple burners as designed
• Common failure symptoms: no spark on all or most burners, continuous clicking, or intermittent ignition across burners

• 1 re-ignition module

• Disconnect electrical power at the breaker and shut off gas supply before servicing
• Access location varies by model; remove rear cover or top as required
• Label and transfer each wire one at a time; mount the module securely and route wires away from heat
• After installation, test each burner for proper ignition and that clicking stops once flame is established

This LED socket assembly restores the high-intensity indicator lighting used on select cooktops to show an active cooking zone. Replace a failed module to bring back clear, consistent illumination. What it does:

• Provides bright LED illumination for a cooking zone indicator
• Restores visual feedback that a burner/zone is in use
• Replaces a failed or damaged LED socket/module
• Common symptoms: no light, dim or flickering light, intermittent operation, or physical damage

• One LED socket assembly

• Disconnect power at the breaker before servicing
• Allow the appliance to cool and protect the glass surface while working
• Access the module from beneath the cooktop; match connector orientation and mounting position
• Test illumination before final reassembly

This O-ring seals the igniter assembly to prevent gas or air leaks and help ensure reliable ignition performance. It's a small replacement seal used when the original is worn, cracked, or missing. What it does:

• Creates a tight seal around the igniter assembly to reduce leaks
• Helps maintain proper ignition performance by keeping components sealed
• Commonly replaced if brittle, cracked, flattened, or after igniter service
• Small, inexpensive part that protects nearby components from gas or moisture exposure

• One O-ring (igniter) as pictured

• Turn off gas and power to the appliance before servicing
• Replace only with the exact O-ring size for your igniter to ensure a proper seal
• Inspect surrounding gaskets and components and replace if damaged

This is a bake igniter assembly used to light the oven's gas burner so the oven can reach and maintain set temperatures. It replaces a worn or failed igniter to restore reliable baking and roasting performance. What it does:

• Provides the heat source to ignite the oven's bake burner so the oven can heat properly
• Allows the oven to reach set temperatures; a weak or failed igniter can cause slow heating or no heat
• Helps establish a consistent flame for stable oven operation
• Works as the replacement assembly for the oven's bake ignition system

• Disconnect power and gas supply before attempting service
• Handle the igniter carefully; the element is fragile and can be damaged by rough handling
• Use proper tools and follow the oven manufacturer's service instructions for safe installation

The Oven Igniter is an OEM part for Samsung ranges. It is responsible for igniting the gas to create a flame that heats the oven cavity for cooking.

A bad oven igniter can be caused by wear and tear over time, electrical issues, or damage. When the igniter malfunctions, it can result in a range of problems, such as the oven not reaching the desired temperature, uneven heating, or the inability to ignite the gas.

Symptoms of a bad oven igniter include:

• Oven not reaching the desired temperature
• Uneven heating of food
• Gas smell without ignition
• Igniter glowing but no flame

Replace your faulty oven igniter with this genuine OEM part to restore your range oven. This Samsung part can also be used on Kenmore/Sears appliances.

The Riding Mower Halogen Light Transformer is essential for maintaining the lighting system of your rear-engine riding mower. This genuine OEM part ensures your mower's halogen lights receive consistent and reliable power, providing bright illumination for safer operation during early mornings or late evenings. Designed specifically for compatibility with a variety of rear-engine riding mower models, this transformer guarantees a secure fit and straightforward installation process. Using the Riding Mower Halogen Light Transformer means you can easily replace a faulty or damaged transformer, restoring the full functionality of your mowerGÇÖs lighting system. This not only enhances visibility but also contributes to the overall safety and efficiency of your mowing tasks. By choosing this genuine OEM part, you ensure the highest quality and durability, reflecting SamsungGÇÖs commitment to reliable performance. Keep your riding mower in top condition and enjoy a better mowing experience with this dependable halogen light transformer.

This inner burner cap for an 18K burner sits over the burner head to shape the flame and shield the ports. Replacing a worn or missing cap restores stable flames, reliable ignition, and consistent cooking performance. What it does

• Positions over the 18K burner head to concentrate and stabilize the flame
• Helps protect burner ports from spills and debris
• Proper seating supports quick, consistent ignition
• Common symptoms of a bad or misaligned cap include uneven or yellow flames, poor simmering, or continuous clicking without ignition

• One inner burner cap

• Turn off gas and power; allow the cooktop to cool completely
• Remove the old cap; clean and dry the burner head and ports
• Set the new inner cap flat and centered on the burner; do not force
• Test ignition and adjust cap position if the flame is uneven or noisy

This outer surface burner cap replaces a damaged or missing cap to protect the burner head and help restore proper flame distribution for consistent cooking. Designed for the outer burner position on compatible Samsung gas ranges and cooktops. What it does:

• Covers the burner head to help shape the flame and protect internal burner components.
• Restores more even heating when the outer cap is cracked, chipped, warped, or missing.
• Helps keep food, grease and spills out of the burner head and igniter area.
• Reduces uneven flames and intermittent ignition caused by a poorly seated or damaged cap.

• Turn off the appliance and gas supply and allow all parts to cool completely before handling.
• Lift the old cap straight up from the burner head; place the replacement cap aligned over the burner post until it sits flat.
• No special tools typically required; inspect the burner head and igniter for debris and clean if needed.

This service door hinge kit replaces a worn or damaged refrigerator/freezer door hinge to restore smooth door operation and proper alignment. It helps stop sagging, rubbing, or noisy movement so the door seals correctly. What it does:

• Replaces the door hinge assembly that supports and guides the door pivot
• Restores proper door alignment to improve sealing and cooling performance
• Stops sagging, binding, or noisy door movement caused by a worn hinge
• Helps maintain consistent door operation after repeated use

• Disconnect power to the appliance before starting any repair
• Support the door during removal and installation to avoid injury or damage
• Tighten fasteners securely but avoid over-torquing to prevent stripping

This service door window pack replaces a damaged or worn microwave/oven door window to restore visibility and proper sealing. It provides the visible glass assembly used in the appliance door for safe operation and viewing. What it does:

• Replaces cracked, scratched, foggy or broken door window glass
• Restores clear viewing of the cooking cavity for monitoring food
• Helps maintain the door seal and proper operation when installed correctly
• Prevents potential heat/light leakage caused by damaged window components

• One door window service pack

• Disconnect power before beginning any door repairs to avoid shock or injury
• Handle glass components with care and wear cut-resistant gloves
• Ensure all retained clips/gaskets are reinstalled and the window is seated per OEM alignment

This service burner gasket seals the burner assembly to the cooktop, restoring a proper seal to help stabilize flames and improve ignition reliability. Use it to replace worn or damaged gaskets on compatible Samsung gas cooktops. What it does:

• Seals the burner-to-cooktop gap to help prevent gas leaks and keep burner components aligned.
• Helps maintain consistent flame shape and heat for more even cooking.
• Can reduce symptoms like sputtering or uneven flames, difficulty igniting, or visible gaps around the burner.
• Fits the specified burner assembly and restores intended burner performance when the existing gasket is cracked, torn, or compressed.

• Turn off the appliance and shut off the gas supply before attempting any service.
• Remove the burner cap and head per the appliance's service instructions; seat the gasket fully around the burner base.
• Inspect surrounding components (burner head, screws, mounting surface) and replace any damaged parts.

This wafer-head Phillips screw (#8 x 3/8 in) is a factory fastener used to secure panels, brackets, and covers in compatible appliances. Replace a missing or damaged screw to restore a tight, properly aligned fit. What it does:

• Secures sheet-metal or plastic components to the appliance chassis or subassemblies
• Helps maintain proper alignment and reduce vibration or rattling
• Replaces lost, stripped, or corroded screws of the same size and type
• Used at panel, bracket, and cover mounting points designed for this fastener

• One wafer-head Phillips screw (#8 x 3/8 in)

• Disconnect power (and gas, if applicable) before servicing
• Start threads by hand to avoid cross-threading; use a #2 Phillips driver
• Do not overtighten, especially into plastic or thin sheet metal
• Replace only with the same size/type fastener removed to ensure proper fit

This illuminated service knob replaces a worn or damaged control knob to restore a visible, easy-to-use control point on your appliance. It provides the same look and basic control function as the original part. What it does:

• Replaces a damaged or faded control knob so settings can be selected and seen clearly
• Illuminated design improves visibility in low light and matches factory appearance
• Fits the original control shaft and detents for reliable selection feel
• Helps address symptoms like loose, cracked, non-illuminating, or cosmetically worn knobs

• 1 illuminated service knob

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Pull the old knob straight off the control shaft; push the replacement knob onto the shaft until it seats
• If illumination does not work after replacement, verify lamp/LED and wiring with the model-specific service instructions