Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement door bin shelf for refrigerator doors. Installs on the inside door to hold condiments and bottles. Replace if cracked, broken, or missing.
The bar retainers just snapped in and the door handle can be replaced with three screws. Took about 5 minutes total. Read more
Seals the refrigerator door to prevent cold air loss and maintain efficiency. Replace if torn, cracked, or not sealing properly. Verify fit by model.
This door gasket presses into slot around door pull off old and press in new a five minute repair Read more
Replacement door shelf bar retainer for refrigerator doors. Snaps into door liner to secure bins and shelves. Replace if cracked, broken, or warped.
Glass insert for refrigerator crisper pan cover. Replaces cracked, shattered, or broken glass that sits in the crisper frame above vegetable bins.
Part arrived in two days from order placement. Opened package , replaced glass insert in refrig. Took about 30 seconds. Thank you for the prompt service. Read more
Refrigerator not cooling but freezer icing up? The defrost timer controls the defrost cycle. Most DIYers replace it in 5-15 minutes with our video guide.
My problem first showed up as varying temperature in both sections of my old mid 1970’s Frigidaire model FPCI-170T-7 refrigerator, which is not listed on most appliance repair databases. Running on the warm side from time to time, as well as sudden fan noise (probably the fan blade hitting ice build-up on the evaporator coil) alerted me to a possible defrost system problem, since the compressor was cooling. The evaporator fan eventually failed after a day or so, and a major repair was... Read more
Freezer frost buildup? Defrost thermostat regulates defrost cycles to prevent ice accumulation. DIY repair takes 15-30 minutes with basic tools.
This was a 2000 model so rather than just replace the defrost timer which was visibly burnt on the terminals, we just did everything. The cold control, defrost timer, thermostat, defrost heater and the compressor capacitor were all replaced. I had the same issue on my older unit and tore it apart replacing one item at a time over a three month period so on an older one i suggest do it all while it is apart. Read more
White door handle for top-mount refrigerators. Replace your cracked, broken, or missing handle. Mounts with screws at top and bottom. Measures 17x1 inches.
Ordered a new handle. Unscrewed two screws took the old handle off and put the new one on put the screws back in. It works great!! Read more
Refrigerator not cooling or compressor won't start? A failed run capacitor prevents the compressor from running. DIY repair in 10-15 minutes with video guide.
In short - I replaced the evaporator fan motor and the evaporator fan blade. The Appliance Parts Pros website was extremely helpful to me. Here's how. 1. The site helped me identify that even though my Freezer says it's a Frigidaire, it's actually an Electrolux. 2. The site identified the potential screech causing parts. (I didn't take a chance, I bought all three) It was a worthwhile investment. My freezer is 20 years old so it deserved some help. 3. The site provided guidance videos (not... Read more
Seals freezer door to prevent warm air entry and cold air loss. Replace if you notice frost buildup, poor sealing, or rising temps. Confirm fit with model.
Easy : Pulled off old damaged gasket and pushed on new ones. No tools needed Read more
Freezer cold but fridge warm? This evaporator fan motor circulates air over coils to cool both compartments. DIY-friendly 30-minute repair with video guide.
Fan motor went bad. Fixed the fridge for less than it would have cost me just to have someone come out and look at it. Read more
Replacement door rack support for refrigerators. Secures bins and shelves on the refrigerator door. Replace when cracked, broken, or missing.
Put racks to together and put into fridge Read more
Replacement door rack support for refrigerator door bins. Snaps into place to secure door shelves. Needed when original support is cracked or broken.
Illuminates your oven interior so you can monitor cooking without opening the door. Replace when burned out or dimming. Verify fit with your model number.
Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old... Read more
White refrigerator door bar that snaps into door rack supports for organizing bottles and jars. Replace if cracked, broken, or missing. Easy install.
Refrigerator making loud noises or not cooling? A worn evaporator fan blade often causes these issues. DIY-friendly repair typically takes 30 minutes.
1. After hearing a loud noise on the freezer side of unit about halfway up, I started investigating what it could be? My conclusion was evaporator motor or evaporator fan blade. One of the signs of this issue was a distinct change in sound when I opened the freezer door. I ordered a new motor and blade, not knowing exactly what it was. 2. I couldn't get water to dispense, so I changed the filter and that wasn't the problem. I ordered a water valve and crossed my fingers. These parts arrived... Read more
Replace your cracked, broken, or damaged refrigerator meat pan. This drawer installs in the fresh food section to store meats and perishables separately.
I removed the meat drawer and shelving unit. I unscrewed the Philips head screws on either side of the shelf brackets. I cleaned the old surfaces and fitted the new plastic hangers in place. I screwed the new hangers in place with the screws I had from the old ones. It was very easy, except the holes in the plastic hanger are not quiet big enough for the screws. I had to push very hard with the screwdriver, and started to strip the head of the screw as well at the screwdriver itself. I did... Read more