Prg4810 Parts

The Whirlpool screw is an OEM replacement part responsible for securely fastening various components and parts within Whirlpool appliances. These screws are essential for maintaining the structural integrity and safe operation of the appliance. These screws hold together critical components like panels, brackets, handles, and internal parts.

This part fixes the following symptoms:

• Loose or wobbly handles on refrigerators, ovens, or other appliances
• Vibrations or rattling noises during appliance operation
• Inability to assemble or disassemble parts during appliance repair or maintenance

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Oven Light Assembly is an OEM part for Whirlpool ranges. This part lights up the interior of the oven, allowing you to monitor the cooking process without opening the oven door. 

Over time, the oven light assembly can fail due to normal wear and tear, exposure to extreme heat, or electrical issues. 

Symptoms of a bad oven light assembly include:

• The light not turning on when the oven door is opened or when the light switch is activated
• Flickering or dim lighting inside the oven
• A broken or missing protective cover

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This factory fastener secures appliance panels, brackets, and internal components. Replacing a missing, stripped, or corroded screw restores proper fit and stability, helping reduce vibration, rattling, and wear during everyday operation.

• Secures covers, brackets, and assemblies to the cabinet or frame
• Restores alignment to reduce gaps, looseness, and vibration
• Replaces lost, damaged, corroded, or stripped hardware
• Matches the original fastener for correct fit and retention

• Disconnect power and shut off water or gas before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Tighten snugly—do not overtighten to prevent thread or plastic damage
• Inspect receiving threads or clips; repair/replace if stripped or broken

This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.

• Fastens brackets, panels, trim, or components to the appliance chassis
• Helps correct loose or missing hardware after vibration or service
• Replaces stripped, rusted, or broken screws
• Can reduce rattling noises or misaligned parts caused by missing fasteners

• Disconnect power; for gas appliances, also shut off the gas supply
• Support the part being fastened; start threads by hand to avoid cross-threading
• Use the correct driver size; tighten snugly without overtightening
• Replace hardware with the exact part number to ensure proper fit

Ignitor with spring and clip

A replacement igniter switch that restores spark control for gas ranges and ovens so burners or the oven igniter can light reliably. Designed to replace a faulty spark switch and help resolve intermittent or absent ignition. What it does:

• Sends the ignition/spark signal to the appliance's igniter or spark electrode.
• Commonly replaces a switch that causes clicking without ignition or burners that won't light.
• Works as the electrical control point between the user controls and the igniter circuit.

• Disconnect power to the appliance and shut off gas supply before beginning any repair.
• Note wiring locations or take a photo, then remove and reconnect wires one at a time to ensure correct placement.
• Wear safety gloves and follow all appliance-specific instructions from the manufacturer.

This reignition module controls and directs the spark to a cooktop's surface burners so they ignite reliably and re-spark if a flame goes out. It restores burner ignition performance and reduces persistent sparking. What it does:

• Sends high-voltage spark to the burner ignitors to light the gas flow
• Attempts automatic re-ignition when a flame is extinguished (safe, intermittent sparking)
• Stops sending spark when the burner control is off
• Commonly linked to symptoms like burners not lighting, constant clicking, or no spark at ignition

• Turn off electrical power and gas supply before servicing.
• Handle wiring and connector pins carefully; match connectors to avoid miswiring.
• Follow OEM instructions for removal and replacement.

This grate foot cushions and stabilizes a burner grate on your cooktop. Replacing worn or missing feet helps keep the grate level and protects the surface from scratches, rattling, and metal-on-porcelain contact during cooking.

• Provides a protective cushion between the grate and cooktop surface
• Helps keep cookware level by stabilizing the grate
• Reduces noise and vibration during burner operation
• Replace if feet are missing, flattened, cracked, or the grate rocks

• Turn off power/gas and allow the cooktop and grates to cool completely
• Remove the grate; clean the foot recess and any old adhesive or residue
• Press the new foot firmly into place; if your model uses adhesive, apply a manufacturer-approved high-temperature adhesive and allow it to cure as directed
• Reinstall the grate and verify it sits flat and stable before use

This burner valve controls gas flow to the oven/burner, restoring proper ignition and flame control when the valve fails. It replaces a worn or leaking valve to improve burner performance and safety. What it does:

• Regulates gas supply to the burner so the flame ignites and maintains correctly
• Commonly replaced when burners won't light, have weak or uneven flames, or shut off unexpectedly
• Stops or reduces gas leakage from a faulty valve when operating normally
• Works as the mechanical control actuated by the appliance's control system to start/stop fuel flow

• One burner valve

• Turn off gas supply and electrical power to the appliance before beginning any repair
• Replace with the exact part and tighten fittings per manufacturer torque guidelines to prevent leaks
• After installation, check all connections for leaks using a safe leak-detection method (soapy water test or approved detector)

This lower heat shield protects the appliance's cabinet and nearby components from excess heat, helping maintain safe operating temperatures and prevent heat-related damage. It fits into the heater assembly area as the original lower protective panel. What it does:

• Deflects and dissipates heat away from sensitive parts to reduce risk of heat damage
• Helps prevent melted insulation or discoloration of nearby surfaces
• Can reduce heat transfer that may contribute to high-surface temperatures or odors
• Restores the appliance's factory heat containment for safer operation

• Disconnect power (and gas if applicable) and allow the appliance to fully cool before servicing
• Use proper hand tools and retain all mounting hardware; follow OEM instructions for placement
• Inspect surrounding components and insulation; replace any damaged parts when reinstalling the shield