Lws3063st Parts

The Thermistor is an OEM replacement part for LG gas ranges. It serves as a highly sensitive temperature sensor mounted inside the oven cavity. 

Symptoms of a bad thermistor include:  

• Inability to select certain cooking modes like bake or convection that involve temperature control
• Fluctuating or inaccurate temperature readouts on oven displays
• Irregular cooking outcomes like hot/cold spots inside the oven
• Repeated error codes regarding temperature sensing issues

Causes can be attributed to prolonged exposures to heat and intermittent combustion byproducts inside the oven. Over a decade of use, these conditions may degrade the thermal and electrical properties of sensor components. 

This genuine LG replacement thermistor installs effortlessly. Installing a new thermistor restores temperature monitoring required for reliable gas oven performance. 

Replacement window glass that restores a clear viewing area in the appliance door and helps maintain a clean, sealed surface. Ideal for replacing cracked, chipped, or cloudy glass to improve visibility and safety. What it does:

• Provides a transparent viewing window so you can monitor cycles without opening the door.
• Replaces cracked, chipped, or fogged glass to restore appearance and function.
• Serves as the door's viewing surface and works with the door assembly and trim.
• Inspect surrounding gaskets, trim, and fasteners when replacing the glass to ensure a proper fit.

• Disconnect power (and water, if applicable) before attempting any repair.
• Wear cut-resistant gloves and eye protection when handling or removing glass.
• Door disassembly and removal of trim or retaining clips is commonly required.
• If the glass is shattered, remove broken pieces carefully and dispose of them per local regulations.

The Thermostat is an OEM part for LG wall ovens. It is a temperature-sensitive cut-off switch located near the oven's heating elements that monitors interior temperatures and prevents overheating within the appliance.

Causes of a bad safety thermostat can be related to prolonged exposure to excessive heat inside the oven cavity, defects in the thermostat's microchip or coil components, or damage from corrosion or physical impact over time.

Symptoms of a failed hi-limit thermostat include:

• The oven's main thermostat clicking repeatedly but no temperature rise inside the cavity
• Unexpected shutdowns of the oven during heating cycles
• Smoking or burning smells coming from the oven area
• Tripped circuit breakers obstructing normal oven operation

This OEM LG part is also compatible with some Kenmore models.

This blower motor housing mounts and aligns the microwave's cooling/vent fan motor and wheel to keep airflow moving through the oven and vent path. Replacing a damaged housing can restore proper airflow and reduce vibration and noise. What it does:

• Holds the blower motor and fan wheel in the correct position
• Directs cooling and exhaust air across components and out the vent path
• Maintains alignment to prevent fan wheel rubbing and vibration
• Typical symptoms: loud rattling/scraping near the vent area, weak venting, unit running hot or shutting off during use, visible cracks/warping of the housing

• 1 motor housing

• Disconnect power; for over-the-range units, remove the microwave from the wall to access the blower compartment
• Discharge the high-voltage capacitor before servicing internal components
• Transfer the blower motor and fan wheel to the new housing; match the original vent orientation
• Use care around sharp metal edges; retain and reuse the original mounting hardware

This small, board-mounted tactile push-button switch is used on the control panel. It registers a momentary press so the control board can accept your selection. Replacing a worn switch restores reliable button response and consistent operation.

• Mounts to the user interface board and provides momentary contact when a button is pressed
• Sends a low-voltage signal to the control, enabling cycle or option selection
• Typical failure symptoms: unresponsive or intermittent buttons, needing extra force to register, stuck/always-on input, or unintended beeps/changes
• Helps restore consistent user-interface input when an individual button switch has failed

• Disconnect power to the appliance before servicing; shut off gas/water if applicable
• Access the control panel to reach the user interface board
• This is a board-level repair; note switch orientation. Replacement may require desoldering/soldering per OEM procedure
• Use ESD precautions and avoid overheating PCB pads; test button function before reassembly

Replace a burned-out microwave cooktop light with this halogen bulb. It restores bright, reliable illumination under your over-the-range microwave so you can see your cookware and workspace while cooking or as a night-light.

• Provides lighting for the cooktop/work area beneath the microwave
• Restores illumination when the original bulb is burned out, dim, or flickering
• Operates with the microwave's light switch/settings
• Common symptoms: no light or intermittent/flickering light

• Disconnect power at the breaker and allow the old bulb to cool before servicing
• Access the lamp from the bottom of the microwave; remove the lens/cover as designed
• Avoid touching the glass with bare hands—use gloves or a clean tissue
• Test the light before reinstalling the cover; inspect the socket or switch; do not access internal components due to stored high voltage

The Heating Element is an OEM part for LG electric ranges. It serves a critical cooking function by using electric current to generate heat energy that cooks food inside the oven cavity. The heating element is constructed from flame-resistant and durable materials precisely designed to withstand high temperatures in a clean efficient manner.  

Causes of a bad heating element can include mineral deposits on coils, cracks from overheating, or general wear over extended use.

Replacing a faulty element restores dependable oven performance. 

Symptoms of a bad element include:

• Inefficient or uneven cooking temperatures
• Longer baking and cooking times 
• Cracking or sagging coils affecting heat output
• Potential safety issues if damage exposes live wires

This element also fits the heating designs used in Jenn-Air and Frigidaire electric ovens.

This replacement shelf assembly restores a sturdy, level storage surface inside your refrigerator, helping you organize items and regain lost space when a shelf is cracked, missing, or no longer sits properly in its supports.

• Supports food containers and keeps items level within the compartment
• Slides into the side supports/rails for stable placement
• Replace if cracked, bowed, or unable to lock into position
• Common symptoms: broken or missing shelf, uneven seating, reduced storage capacity

• Remove items from the shelf area; lift out the damaged shelf
• Insert the new shelf into the side slots/rails and slide back until fully seated
• Ensure the shelf is level and locked into place before reloading items
• Handle edges carefully; avoid impact to prevent damage

This power transformer converts household AC to the correct output for the appliance's control circuitry. Replacing a failed unit restores power to the display and controls so the appliance can start and run reliably. What it does:

• Steps and isolates line voltage to the specified output for control and user-interface circuits
• Supplies low-voltage power to the control board, relays, and sensors
• Typical failure symptoms: no power or blank display, won't start, intermittent power loss, repeatedly blown fuse, or signs of overheating/burnt odor near the transformer

• 1 power transformer

• Disconnect power before servicing; capacitors can retain a charge
• Photograph and label wiring, then move each lead to the matching terminals; secure the transformer with original hardware
• Keep wiring clear of sharp edges and hot components; insulate any splices as originally designed
• Verify input/output with a multimeter using model-specific service information

Restore proper operation with this main control board. As the refrigerator's power PCB, it distributes power and coordinates the compressor, fans, defrost, and other systems so temperatures stay consistent and core functions work as designed.

• Manages power to the compressor, evaporator/condenser fans, and defrost system
• Processes inputs from temperature sensors and switches to control cooling cycles
• Supplies power and communication to other controls and components
• Failure may present as: unit won't run or is dead, not cooling, fans or lights not working, intermittent operation, clicking/chattering, or error codes

• Disconnect power to the refrigerator before servicing to avoid shock
• Handle the PCB by the edges and use ESD protection
• Photograph wiring and transfer connectors one at a time to matching terminals
• Location varies by model; ensure connectors are fully seated and covers reinstalled before restoring power

The Heating Element is an OEM part for LG ranges. It is responsible for providing heat to the oven cavity, allowing for proper cooking and baking. 

The heating element is exposed to high temperatures with each use and over time can become brittle or defective. Causes of a bad heating element can include cracks in the coils, burn marks, or faulty electrical connections. 

Symptoms of a bad heating element include: 

• The oven not heating up or heating unevenly
• Diminished cooking power 
• Burning or burning smell from the oven
• Tripped circuit breaker or blown fuse

Replace yours today with this genuine LG heating element and restore your oven's full cooking capabilities. This OEM LG part is also compatible with Sears/Kenmore.

This hinge assembly is the door's pivot mechanism. It supports and aligns the door so it opens smoothly and closes securely, helping restore proper sealing and everyday performance when the original hinge is bent, worn, or broken.

• Provides the pivot point and structural support for the door
• Maintains alignment so the door closes flush and seals correctly
• Restores smooth opening/closing when the old hinge binds or seizes
• Replace if you see sagging, rubbing, squeaking, poor closure, or visible damage

• Disconnect power before servicing
• Support the door during removal and installation to prevent damage or injury
• Transfer any model-specific covers, spacers, bushings, or screws from the old hinge as needed
• After installation, verify door alignment and gasket contact; adjust per the service manual

This vacuum fluorescent display (VFD) is the control-panel display module that shows time, status icons and cycle information so you can read settings and monitor operation. Restores clear numeric/character readout and indicators. What it does:

• Displays time, cycle status, and function icons on the appliance control panel
• Illuminates characters and icons so settings and messages are visible
• Replaces a display that is dim, flickering, blank, or showing garbled/missing characters
• Works with the control-panel circuit to communicate user selections to the appliance electronics

• Disconnect power to the appliance before starting any repair to prevent shock or damage
• Handle the display/module carefully and avoid touching connector pins or display surface
• Installation typically requires removing the control panel to access the display connector; inspect connectors for proper seating after installation

This vent directs and channels airflow for proper ventilation in the appliance, restoring reliable exhaust or intake flow and helping prevent overheating or airflow-related performance issues. What it does:

• Channels exhaust or intake air where the appliance design requires
• Restores proper airflow to reduce overheating and improve performance
• Replaces cracked, deformed, or clogged vents that cause restricted airflow
• Can reduce unusual air-related noises caused by damaged venting

• One vent assembly

• Disconnect power (and water if applicable) before beginning any service
• Inspect surrounding ducting and seals; replace damaged gaskets or clamps for best results
• Secure the vent with the original fasteners; do not force or overtighten plastic tabs

Replacement fan motor assembly that restores airflow and ventilation inside the appliance. Swapping a worn or failed fan reduces noise and helps maintain proper temperature and component cooling by restoring consistent air movement. What it does:

• Circulates air to maintain proper internal airflow and ventilation.
• Reduces or eliminates abnormal noises such as grinding, rattling, or squealing from a failing fan.
• Helps prevent component overheating by moving air across electronics or cooling surfaces.
• Can resolve symptoms like weak or no airflow and inconsistent cooling/venting performance.

• Disconnect power (unplug or shut off breaker) before accessing the appliance.
• Installation typically requires removing access panels; keep track of screws and mounting hardware.
• Handle electrical connectors carefully and reconnect wires to the original terminals; inspect harnesses for damage.
• After installation, restore power and verify the fan runs smoothly and quietly before reassembling all panels.

This customized screw secures appliance components where a standard fastener won't fit, helping keep panels, brackets and small assemblies stable. It's a direct-fit replacement when the original specialized screw is missing or damaged. What it does:

• Fastens and holds appliance panels, brackets or small parts in place
• Prevents rattling, loose trim or misaligned components caused by a missing or stripped screw
• Matches the OEM fit and thread pattern for proper engagement and alignment
• Used in locations that require a non-standard or customized fastener

• Disconnect power and water before servicing the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten securely but do not overtighten; overtightening can strip threads or crack parts
• Keep removed hardware organized so you can reinstall in the original location