Thermador Door Full Closing Parts

The Base Panel is an OEM part for Bosch dishwashers. It serves as a protective cover for the bottom of the dishwasher, shielding internal components from debris, moisture, and damage while also contributing to the appliance's structural stability.

Causes of a bad base panel can include physical damage from impacts, corrosion due to prolonged exposure to moisture, or general wear and tear over time. A compromised base panel can lead to further issues by allowing dirt and water to infiltrate sensitive components.

Symptoms of a bad Base Panel include:

• Visible cracks or holes in the panel
• Water leaking from the bottom of the dishwasher
• Increased noise during operation
• Loose or misaligned panel

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Mullion Heater is an OEM part for Bosch refrigerators. It is designed to prevent condensation from forming on the refrigerator door mullion, the vertical divider between the doors. This heater ensures that the mullion stays warm enough to stop moisture from condensing and causing potential water damage or mold growth.

Causes of a bad mullion heater can include electrical failures, wear and tear from continuous use, or manufacturing defects.  

Symptoms of a bad mullion heater include:

• Visible condensation or frost on the door mullion
• Water pooling or dripping around the door area
• Increased humidity inside the refrigerator
• Mold or mildew developing near the door seal

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This is a replacement glass panel for the appliance's front panel. It restores a clean, durable surface and helps protect the components behind it when the original glass is cracked, chipped, or shattered.

• Forms the exterior glass surface on the appliance's front panel
• Helps shield underlying components from spills and impacts
• Restores proper fit and appearance when the original glass is damaged
• Common symptoms: visible cracks/chips, shattered glass, loose or rattling panel, missing glass

• Disconnect power; also shut off gas before servicing
• Wear cut-resistant gloves and eye protection; handle glass carefully
• Support the door or front panel during removal to prevent stress or drops
• Transfer and reuse existing trim, logos, gaskets, and hardware as designed; do not overtighten fasteners

This outer door is the dishwasher's exterior front panel that restores the appliance's appearance and protects internal components from damage. It provides a finished look and replaces dented, scratched, or corroded panels. What it does

• Covers and protects the inner door assembly, controls, and insulation from impact and moisture.
• Restores the dishwasher's exterior finish and alignment for proper sealing.
• Helps prevent further cosmetic damage and exposure-related corrosion.
• Resolves issues where visible dents, deep scratches, or rust affect the door surface.

• One outer door panel only.

• Disconnect power and water supply before starting any repair.
• Door panels can be heavy or awkward—have a second person assist to avoid dropping or bending the panel.
• Follow the manufacturer's service manual for correct removal/reinstallation steps and torque specifications.
• If trim, latch, or control components are attached, verify whether they must be transferred from the old door.

This inner door glass panel replaces the interior glass pane in the door assembly. It restores a clear, heat-resistant barrier so your appliance can retain heat and operate safely after the original pane cracks or shatters.

• Serves as the interior glass pane of the door facing the cavity
• Helps insulate the cavity to maintain stable cooking temperatures
• Direct replacement for cracked, shattered, or missing inner glass
• Can help address heat loss and unsafe door conditions

• Disconnect power at the breaker and allow the appliance to cool completely before starting
• Remove the door per your model's service instructions and place it on a padded work surface
• Wear cut-resistant gloves and eye protection; handle glass by the edges
• Transfer any brackets/clips in the original order and tighten fasteners snugly without overtightening

This inner door glass is the replacement glass panel that fits inside the appliance door and restores a clear, intact viewing surface. Replacing a damaged inner glass helps maintain door integrity and normal operation. What it does:

• Replaces cracked, chipped, or broken inner door glass to restore a safe viewing window
• Prevents loose glass shards and helps the door close and seal properly
• Restores a clean, clear view into the appliance cavity without affecting exterior trim
• Matches the OEM inner glass design for proper fit and alignment

• 1 inner door glass panel

• Recommended for experienced DIYers; handle glass carefully to avoid cuts
• Remove power and follow manufacturer door-disassembly steps before replacing the inner glass
• Use appropriate fasteners and gaskets from the original assembly; do not force-fit the glass
• Inspect surrounding door parts (brackets, clips, seals) and replace any damaged pieces to ensure proper reassembly

This outer door panel is the exterior panel that restores the appliance's front appearance and protects internal door components. Replacing a damaged or dented outer panel brings back a flush, sealed door and improves the unit's look. What it does

• Covers and protects inner door components from impact, moisture, and wear
• Restores proper door alignment and helps maintain the cabinet seal
• Improves cosmetic appearance when the original panel is dented, scratched, or corroded
• Helps prevent debris from entering the door cavity and affecting internal parts

• One outer door panel

• Designed for compatibility with specific OEM door assemblies; fit for your model before ordering
• Handle and trim may need transfer from the old panel; your model's parts diagram
• Use appropriate fasteners and avoid overtightening to prevent panel distortion
• Disconnect power and water (if applicable) and follow general safety precautions before servicing