Maytag Dishwasher Silverware Tray Front Door Parts

The Silverware Basket Assembly is an OEM part for Whirlpool dishwashers. It provides an organized space for holding and separating silverware and small utensils during the dishwashing cycle, ensuring they are properly cleaned and dried. This basket measures 8 inches wide, 11-1/2 inches high, and 12 inches deep. 

You should replace the silverware basket assembly if it becomes cracked, warped, or damaged. Causes of a bad silverware basket assembly can include regular wear and tear from repeated use, damage from overloading or mishandling, and exposure to high temperatures.

Symptoms of a bad silverware basket assembly include:

• Broken or missing sections of the basket
• Utensils slipping through holes or falling out
• Difficulty placing or removing silverware
• Inefficient or uneven cleaning of silverware

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dishwasher Access Panel is an OEM part for Whirlpool dishwashers. This panel covers the lower front section of the dishwasher, providing a finished look while protecting internal components from debris and damage.

Causes of a bad access panel include accidental impacts, wear and tear over time, or exposure to moisture, which can lead to rust or corrosion.

Symptoms of a bad access panel include:

• Visible cracks or dents
• Rust or discoloration
• Loose or misaligned panel

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement panel restores your appliance's original look while shielding internal components. Install a new panel to replace a dented, cracked, or missing piece and keep the assembly secure, aligned, and protected.

• Covers and protects internal parts while restoring the exterior finish and fit
• Provides the designed mounting surface for trim/handles; helps maintain alignment
• Replace when the panel is dented, cracked, warped, rusted, or mounting tabs are broken
• Helps resolve loose or rattling panels and visible gaps or misalignment

• Disconnect power; turn off water or gas supply if applicable
• Wear gloves and protect finished surfaces; handle carefully to avoid bending or scratching
• Transfer and reuse original screws, clips, insulation, and trim as directed by your service manual
• Fit and alignment before fully tightening fasteners

The Water Level Switch Bracket is an OEM part for Whirlpool dishwashers. This bracket holds the water level switch in place. The water level switch is a part that monitors and regulates the amount of water inside the dishwasher.

Causes of a bad Water Level Switch Bracket can include physical damage that may occur during use or installation, corrosion over time due to exposure to moisture and detergents, or general wear that compromises its ability to securely hold the water level switch.

Symptoms of a bad Water Level Switch Bracket include:

• The dishwasher not filling with the correct amount of water
• Water leaking from the dishwasher if the switch moves out of position and fails to regulate the water level accurately.
• Unusual noises during the fill cycle

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Panel (BLK) is an OEM part for Whirlpool dishwashers. This black exterior panel is designed to provide a sleek and durable front surface for the dishwasher, enhancing its appearance and protecting internal components.

Causes of a bad panel can include physical impacts, scratches, or general wear over time. A compromised panel can affect the aesthetic appeal and may expose internal components to potential damage.

Symptoms of a bad panel include:

• Visible dents, scratches, or cracks
• The panel not fitting securely or aligning properly
• Discoloration or fading of the panel surface
• Difficulty opening or closing the dishwasher door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This dishwasher silverware basket fits in the lower rack to hold and organize utensils during the wash. Replace a cracked, warped, or missing basket to keep flatware upright and prevent pieces from slipping through or rattling loose.

• Holds forks, knives, and spoons securely in the lower rack throughout the cycle
• Helps separate utensils for better spray coverage
• Direct replacement when the original basket is cracked, warped, or missing
• Common symptoms: utensils tip over or fall through, basket won't sit flat, plastic is broken or deteriorated

• No tools required; lift out the old basket and set the new one in the lower rack
• Ensure the basket sits flat and does not interfere with the lower spray arm
• Follow your dishwasher's loading guidance for utensil orientation
• Handle cracked plastic carefully and wear gloves if needed

This is one half of the silver basket. For a complete basket you will need to order two(2).

Replace a damaged or missing silverware basket with this dishwasher basket. It organizes and separates flatware and small utensils so water can reach each piece, improving cleaning results and keeping items contained throughout the wash.

• Holds and separates silverware and small utensils during the dishwasher cycle
• Helps keep pieces upright for better spray coverage and cleaning
• Replace if the basket is cracked, warped, or has broken grid sections that let utensils fall through
• Also replace if missing or if the basket no longer stays securely in place

• Turn off power to the dishwasher before working inside
• Remove the old basket and place the new basket in the designated location for your model
• Ensure spray arms rotate freely with the basket installed
• Load utensils per your owner's manual for best results

Dishwasher silverware basket includes both halves. Color: gray. Measures about 8 inches wide by 9-1/2 inches high by 12 inches deep.

Color: White

Color: White. This basket measures about 9 inches wide by 7 inches high by 6 inches deep. The cover and handle are not included. The cover is no longer available. For the handle order W11033847.

This is the lower access panel for the appliance's base. It finishes the front opening and shields internal components, helping reduce noise and keep dust and debris away from the motor and wiring.

• Covers the lower service opening beneath the door to provide a clean, finished look
• Helps protect internal components from debris and accidental contact
• Can reduce vibration noise when properly secured
• Replace if the panel is bent, cracked, rusted, missing, or rattles/doesn't stay secured

• Disconnect power; also shut off the water supply
• Support the existing panel while removing mounting screws; retain hardware for reuse
• Position the new panel, align with mounting holes/slots, and reinstall screws—do not overtighten
• Confirm door clearance and that the panel sits flush without interference

This silverware basket organizes utensils in the lower rack of your dishwasher so water can reach them evenly. Replacing a cracked or missing basket keeps small items contained and helps prevent interference with the spray arm.

• Holds cutlery and small utensils upright during wash and rinse cycles
• Keeps small items from falling through the rack or onto the heater
• Replace if the basket is cracked, warped, melted, or missing sections
• May help with utensils tipping over, rattling, or blocking the spray arm

• Remove the lower rack, lift out the old basket, and position the new basket in the same location
• Ensure the basket does not obstruct the spray arm and the rack rolls freely
• Handle sharp utensil tips carefully; install with the dishwasher cool and empty

This part is a genuine OEM replacement control panel intended for use with dishwasher models.The control panel allows the user to select the desired cycles of the dishwasher. It houses the buttons and the display. The control panel could become broken or start to malfunction over time, which might include the buttons getting stuck or jammed, or the display failing to light up. When replacing any appliance part, the appliance should be turned off and unplugged from power to prevent potentially serious injuries from occurring. This part was manufactured by Whirlpool. This control panel is sold individually. It is intended for use with dishwasher models manufactured by Whirlpool, Maytag, Jenn-Air, Amana, Admiral, Norge, and other brands.

Keep utensils organized and secure during the wash. This silverware basket sits in the lower rack and holds flatware and small items so water can circulate freely for effective cleaning and to help prevent obstructions.

• Organizes forks, spoons, knives, and small items in the lower rack to keep them from moving during cycles
• Promotes proper spray coverage by allowing water to flow through the basket's grid
• Helps prevent loose utensils from blocking the spray arm or damaging internal components
• Replaces a cracked, warped, or missing basket; common signs include broken sections or utensils falling through

• Disconnect power at the breaker before servicing
• Remove the old basket and place the new basket in the lower rack; no tools required
• Ensure the basket sits flat and does not contact the spray arm
• Follow your owner's manual for safe utensil loading practices

Color: white. Measures about 2-1/2 inches wide by 6 inches high by 10 inches deep.