Dlb1550aalwh Parts

Best Seller

Genuine Ge part

Dryer Drive Belt

By: Ge

Part Number: WE12X10014

The Dryer Drive Belt is an OEM part for GE dryers that connects the motor to the drum, allowing the drum to rotate during the drying cycle. The belt measures approximately 87 inches long and 0.25 inches wide, with 4 ribs.

Over time, the Dryer Drive Belt can wear out or break, leading to the drum not turning.

Symptoms of a bad Dryer Drive Belt include:

The drum not spinning or rotating
A squealing or thumping noise coming from the dryer
The dryer stopping unexpectedly during a cycle

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms

Will not tumble
Won't start
Noisy

Do-It-Yourself Stories from Customers like You Was making a squeaking/squealing on start up Gerald G. • Nashua , NH • March 20, 2016

My GE dryer from the late 80's/early 90's was squealing when it would start up, belt or bearing I was thinking. I found a manual online that covered my model and I watched a video on this site that showed me how to take it all apart, mine was a bit different but the principles were the same. I took it apart and added some quick-disconnects to 2 wires so next time I can take the front panel off easily. When I got to the bearing it looked worn but not bad so I cleaned it and put it back. ... Read more

$15.38

Compare At:: $27.08
You Save:: $11.70

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dryer Motor Kit

4.7 (21)

By: Ge

Part Number: WE17X10010

This dryer motor kit powers the drum and blower. Replacing a weak or failed motor restores proper tumbling and airflow so the dryer starts reliably and dries loads more evenly.

Drives the drum via the belt and turns the blower wheel for airflow
Helps resolve: dryer hums but won't start, drum won't turn, or stops mid-cycle
Can reduce loud buzzing/grinding noises from the motor area
Restores consistent operation when the motor overheats and trips its protector

What's included: 1 drive motor Install notes:

Disconnect power; turn off gas supply to gas dryers before servicing
Remove panels to access the drive system; release belt tension and remove the drum as needed
The blower wheel threads onto the motor shaft—support it carefully; many GE dryers use a reverse (left-hand) thread
Transfer wiring and any reusable hardware to the new motor; test before reassembly

Do-It-Yourself Stories from Customers like You Motor was not working Linn C. • Saint Augustine , FL • June 17, 2014

Replaced the motor with a new one, if I can offer any advice about doing this job, make sure to keep track of where each wire goes on the motor and whatever wires need to be disconnected. There are a few good video's online showing how to do this job and can save you a lot of time and frustration. Read more

$156.51

Compare At:: $283.68
You Save:: $127.17

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Idler Pulley (Dryer Belt Tensioner)

4.9 (19)

By: Ge

Part Number: WE12X81

This idler pulley keeps tension on the dryer drum belt so the motor can spin the drum smoothly. Replacing a worn pulley can quiet squealing and restore consistent tumbling.

Maintains proper belt tension so the drum turns under load
Free-spinning pulley reduces friction and belt wear
Common symptoms of failure: squealing/chirping noises, drum won't turn, belt slipping or fraying, burning rubber smell
Helps prevent the belt from jumping off the motor or drum

What's included: 1 idler pulley Install notes:

Disconnect power; for gas dryers, shut off the gas supply
Access typically requires removing the top/front panel and releasing belt tension to remove the drum
Transfer any spacers/retainer from the old pulley to the new one; the pulley spins freely before reassembly
Route the belt per the model's diagram and check belt alignment/tension before test run

Do-It-Yourself Stories from Customers like You The dryer was squeaking loudly George V. • Weirton , WV • December 13, 2014

I replaced the drum bearing in the back and also the nylon sliders in the front. It rook some time but was not difficult. I took some extra time to thoroughly clean all the lint from the inside. Read more

$13.76

Compare At:: $29.75
You Save:: $15.99

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Motor Pulley (Drive)

4.0 (1)

By: Ge

Part Number: WE12X41

This motor drive pulley guides the dryer drive belt and helps transfer motor power to the drum for proper rotation. Replacing a worn or damaged pulley restores smooth drum movement and reduces noise. What it does:

Guides and supports the drive belt so the drum turns evenly
Maintains belt alignment to prevent slipping or excessive wear
Reduces squealing or grinding caused by a damaged pulley bearing
Helps restore normal tumbling when the drum drags or hesitates

What's included:

One motor drive pulley

Install notes:

Disconnect power to the appliance before any service; follow lockout/tagout best practices
Inspect the drive belt and bearings while replacing the pulley; replace worn belt or bearings as needed
Typical service requires basic hand tools and access to the dryer cabinet or motor housing

Do-It-Yourself Stories from Customers like You Broken belt Richard B. • Fairfield , CT • March 14, 2015

Replaced belt, pulley with a 4 grove pulley. Pulley that was on there was a 3 grove pulley, Had to cut the old one off, Press on to shaft. Replaced rear drum bearing. Bearing was locked on with a snap ring. Access to it from a removable plate on the back side of dryer. Reset belt and idler puller by removing a long back plate on the bottom rear side of the dryer. None of this was shown in your Video. Read more

$27.25

Compare At:: $32.43
You Save:: $5.18

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

T/Stat L258 - 50

5.0 (14)

By: Ge

Part Number: WE4X584

The High Limit Thermostat is an OEM part for GE dryers. It is a safety device that prevents the dryer from overheating by cutting off power to the heating element if the temperature exceeds a safe limit. This helps protect the dryer and the user from potential fire hazards.

Causes of a bad high limit thermostat can include electrical faults, repeated exposure to high temperatures, or wear and tear over time. When the thermostat fails, it may either keep the dryer from heating or cause it to overheat.

Symptoms of a bad high limit thermostat include:

The dryer not heating at all
The dryer overheating and shutting down mid-cycle
Clothes taking longer than usual to dry
The dryer running but not producing any heat

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Too hot
No heat or not enough heat

Do-It-Yourself Stories from Customers like You Dryer would heat up and then shut down and not restart until it was completely cooled down Theron H. • Cozad , NE • August 11, 2015

I replaced all 3 thermostats. It works good now. Read more

Genuine Ge part

Thermostat

5.0 (9)

By: Ge

Part Number: WE4X600

Do-It-Yourself Stories from Customers like You Dryer would heat up and then shut down and not restart until it was completely cooled down Theron H. • Cozad , NE • August 11, 2015

I replaced all 3 thermostats. It works good now. Read more