Kcd1250x3 Parts

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: black. It measures about 4 inches in diameter.

This is the front guard for a refrigerator door bin. It snaps into place to keep bottles, jars, and condiments from sliding out when the door is opened and closed.

• Forms the front barrier of a door shelf/bin to hold items securely
• Restores stability and organization if the original guard is cracked or missing
• Common symptoms: items fall off the door shelf, loose or broken front rail, difficulty keeping door-bin contents in place
• Helps maintain proper door-bin capacity when the original part is damaged

• Disconnect power and remove items from the affected door bin before starting
• Release the old guard by lifting/unsnapping it from the endcaps or tabs
• Align the new guard with the tabs/hooks and press firmly until it snaps in evenly
• Do not force; verify correct position and orientation if resistance is encountered

This installation kit includes the manufacturer-specified components needed to complete a secure, correct install of the designated appliance or accessory. Use it to replace missing pieces and finish the job with proper fit, alignment, and stability.

• Provides the parts required by the manufacturer to complete installation
• Helps ensure secure mounting and correct positioning
• Useful for new installs, re-installs, or when original hardware is missing or damaged
• Common indications you need this kit: incomplete installation, loose fit, or missing hardware

• Disconnect power and shut off any water supply before starting
• Follow the installation instructions provided with the kit and your product
• Use appropriate tools; check level and clearances before final tightening; get help lifting heavy units

Color: Black. For biscuit order 98008169. For white order WP98008544.

This gasket fits between the sink opening and the disposer's sink flange to create a watertight seal. Replacing a worn gasket helps stop drips at the top of the disposer and keeps the flange securely seated.

• Seals the joint between the sink flange and sink to prevent leaks
• Helps maintain a tight, stable flange connection
• Replace if the original gasket is cracked, flattened, or deteriorated
• Typical symptoms: water leaking at the sink drain/disposer rim or a loose flange

• Disconnect electrical power to the disposer at the breaker and unplug it
• Support the disposer, loosen the mounting assembly, and remove the sink flange
• Clean mating surfaces; place the new gasket between the flange and sink, then tighten evenly per the product manual
• Restore power, run water, and check for leaks

This mounting gasket creates a tight, cushioned seal where a component attaches to its housing or bracket. Replacing a worn seal helps stop leaks and rattles while restoring a secure, reliable connection at the mounting point.

• Forms a seal between two mounting surfaces to help prevent leaks or seepage
• Cushions and isolates vibration for quieter operation
• Helps maintain proper alignment of the mounted component
• Replace if the gasket is cracked, flattened, brittle, or no longer sealing

• Disconnect power and shut off water or gas, if applicable
• Note the gasket's orientation before removal
• Clean and dry both mating surfaces; remove all old gasket material and residue
• Seat the new gasket evenly; reassemble and tighten fasteners snugly without overcompressing; test for leaks/operation

This disposer stopper fits in the disposer throat to plug the sink drain when needed. Replace a worn or missing stopper to restore a dependable water seal and keep utensils and debris out of the disposer. What it does:

• Seals the disposer/sink opening to hold water in the sink basin
• Helps prevent utensils and debris from entering the disposer when not in use
• Restores proper sealing when the original stopper is cracked, warped, or missing
• Typical symptoms: water leaks past the stopper, poor fit in the opening, damaged or missing stopper

• One disposer stopper assembly

• Turn off the disposer at the wall switch and, if accessible, disconnect power for safety
• Clean the sink flange/disposer throat to remove buildup that can prevent sealing
• Insert the stopper and seat it evenly to create a seal; do not run the disposer with the stopper engaged
• Hand-wash and dry periodically to maintain the sealing surface; avoid harsh chemicals on the rubber

This is a replacement Seal - stopp that restores a secure seal to the original component, helping prevent leaks and keep the appliance operating normally. Use it when the original seal is worn or damaged. What it does

• Forms a tight seal at the mating surface to help stop water or air leaks
• Restores proper fit where a worn seal causes seepage or dripping
• Helps reduce related symptoms like water pooling beneath the appliance or visible leakage
• Simple, single-piece part designed to match the OEM sealing point

• Disconnect power to the appliance before starting work; turn off water supply if applicable
• Inspect mating surfaces and clean away debris or old sealant before installing the new seal
• Fit the seal fully into its groove or mounting location; do not stretch or twist the part during installation

Replacement stringer bolt that secures the appliance's stringer or support rail to the cabinet frame, restoring panel alignment and preventing movement. Use when the original bolt is missing, loose, or damaged. What it does:

• Secures the stringer/support rail to the appliance frame so panels and assemblies stay aligned.
• Helps prevent cabinet or panel movement that can cause rattling or vibration during operation.
• Restores proper alignment when a loose or missing bolt causes misaligned panels or binding doors.
• Simple, direct replacement for a corroded, stripped, or lost fastener.

• Disconnect power before working on the appliance and remove any panels.
• Use the correct-size socket or wrench; hand-tighten, then snug—do not overtighten to avoid stripping threads.
• Inspect mating threads and replace the bolt if heads or threads are damaged; for the correct fastener location.

Pressure hose for water level switch.

This stopper assembly seals the drain opening to allow tubs or sinks to fill and hold water. It replaces a damaged or worn stopper so you can restore proper fill-and-hold function and stop unwanted leaks. What it does

• Seals the drain to hold water for washing or soaking
• Opens and closes to allow controlled draining when needed
• Stops water from leaking around a worn or damaged stopper
• Restores normal fill-and-drain operation when the original stopper no longer seals

• One stopper assembly as shown

• Turn off water supply and remove standing water before starting
• Basic hand tools usually required; follow the appliance or sink manufacturer instructions
• Inspect surrounding drain and seals during replacement; replace damaged gaskets if present