Lw1015er Parts

The Display PCB Assembly is an OEM part for LG microwaves. Located behind the control panel, it houses the critical electronic components that power the display screen and control functions. The PCB assembly is designed to interface the control inputs and outputs with the microwave's operational systems.   

Causes of a failing PCB can include moisture damage, component failure due to power surges, or cracks/breaks from accidental impact over time.

Symptoms of a bad Display PCB Assembly include:

• Black or non-responsive touchscreen  
• Inability to power on or select cooking presets
• Erratic control behaviors such as random button presses
• Recurring electronic or operational error codes

This OEM LG replacement part is also compatible with Sears/Kenmore microwave models. 

This is the main electronic control board for the appliance. It manages and coordinates power to key components, helping the unit run correctly and respond to user settings.

• Regulates and distributes power to compressors, fans, valves, and other loads
• Interprets sensor and user input to control cooling and defrost cycles
• A failed board can cause no power, no cooling, unresponsive controls, or intermittent operation
• Resolve issues like lights/fans not running or error codes related to control faults

• Disconnect power before servicing; capacitor discharge may be required
• Handle the board by edges and avoid touching components to prevent ESD damage
• Photograph/wire-note all connections before removal; move connectors over one by one
• Mount securely and verify all harnesses are fully seated before restoring power

This multi-wire harness connects the control and several components inside your appliance, carrying power and signals through factory-molded connectors. Replace a damaged harness to restore reliable electrical connections and eliminate intermittent or dead component behavior. What it does:

• Distributes power and control signals between the appliance's control and multiple components via keyed connectors
• Restores secure connections when original wires or plugs are burned, loose, or damaged
• Maintains proper routing and strain relief to help prevent chafing, shorts, and intermittent faults
• Symptoms include intermittent operation, a component not running, failure to start, error codes, or visible heat damage/burnt odor from the wiring

• 1 multi-wire harness assembly

• Disconnect power to the appliance before servicing; turn off water or gas if applicable
• Photograph routing and connector locations before removal; transfer any clips/ties/retainers from the old harness
• Seat connectors fully; do not pull on wires—work by the connector bodies and match keyed plugs carefully
• Route away from sharp edges, moving parts, and hot surfaces; secure with all original clips and tie-downs

Replace a missing or damaged installation kit with this Install Part Assembly. Designed for select air conditioners, it helps secure and seal the unit during setup for a stable fit and reliable performance.

• Provides the correct mounting/finishing components needed for proper installation
• Helps seal the opening to minimize air leaks and reduce vibration/noise
• Restores secure, stable support of the chassis during and after install
• Symptoms indicating replacement: incomplete installation, loose fit, rattling, or drafts around the unit

• Disconnect power before beginning; use two people to lift and support the unit
• Follow the model's installation instructions carefully
• Inspect the opening/sleeve; install level and tighten all fasteners securely
• After installation, verify a tight perimeter seal and stable, rattle-free operation

This NTC thermistor assembly is the temperature-sensing probe and harness the control uses to read actual temperatures and regulate operation. Replacing a failed sensor restores accurate temperature feedback for consistent performance and proper cycling. What it does:

• Senses temperature via a negative temperature coefficient element; resistance decreases as temperature rises
• Sends the signal to the control board to manage operation and cycle timing as designed
• Typical symptoms include inaccurate temperatures, not maintaining set temperature, extended run times or short cycling, and sensor-related error codes
• Often reads out of range when tested at known temperatures

• One NTC thermistor assembly

• Disconnect power to the appliance before servicing; turn off water supply if applicable
• Note original sensor placement, routing, clips, and insulation before removal
• Install the new assembly; route wiring away from sharp edges, heat, and moving parts; secure any clips/insulation as found
• Restore power and run a diagnostic or allow the unit to stabilize, then verify operation

This multi harness is a factory-style wiring harness that connects multiple electrical components to deliver power and control signals, restoring reliable electrical communication for the appliance. What it does:

• Routes power and signal connections between control boards, sensors, switches and motors
• Replaces damaged or broken wiring that can cause intermittent or no power to components
• Common symptoms: appliance won't start, controls unresponsive, intermittent operation, or error codes related to communication
• Restores proper electrical connections when original harness shows wear, frayed wires, or connector damage

• Disconnect power to the appliance before starting any work
• Handle connectors gently; match connector shapes and colors for correct installation
• Route harness along original wire channels and secure with clips or ties—avoid sharp edges and heat sources

This remote controller assembly replaces a malfunctioning TV remote control PCB and housing to restore infrared/IR command transmission and on-unit button control. Ideal when the remote stops responding or buttons become unresponsive. What it does:

• Replaces the internal PCB and button assembly that sends IR signals to the TV.
• Restores remote control functions like power, volume, channel, and input selection.
• Helps resolve symptoms such as no response from the remote, intermittent commands, or stuck/non-working buttons.
• Works with the existing remote cover and batteries if those components are reused.

• Disconnect power to the TV and remove batteries from the remote before replacing the assembly.
• Use appropriate small screwdrivers and keep track of screws and clips; handle the PCB by its edges to avoid damage.
• Reassemble carefully, insert fresh batteries, and test all functions after installation.

This power cord assembly provides the main AC connection for your appliance so it can receive reliable power. Replacing a damaged cord restores safe, consistent power delivery and reduces risk of intermittent operation or electrical hazards. What it does:

• Supplies AC power from the outlet to the appliance's internal power input
• Replaces frayed, cracked, or damaged wiring that can cause intermittent power or failure to start
• Helps eliminate loose or corroded connector issues that produce sparks, arcing, or burning smells
• Restores a secure, factory-style connection when the original cord is worn or broken

• Disconnect the appliance from power at the outlet before servicing
• Route the cord and secure strain relief exactly as the manufacturer specifies to avoid pinching
• Inspect connectors and terminals for damage; replace the entire assembly if terminals are corroded or insulation is compromised

This install part assembly set secures and positions related components during appliance installation or service, restoring proper alignment and fit for a finished installation. It's a direct-fit service kit designed for factory-style results. What it does

• Provides the mounting hardware and brackets used to install or reseat the related assembly
• Helps stop gaps, misalignment, or loose-fitting panels caused by missing or worn fasteners
• Can reduce rattling or vibration related to insecure installation points
• Supports correct placement so connected parts operate as intended

• Always disconnect power and water before starting service
• Follow the appliance service manual or OEM installation instructions for correct placement and torque
• Basic hand tools are typically required; inspect removed parts for wear and replace as needed

The Module Display PCB Assembly is an OEM component specifically designed for LG dishwashers. Housed within the electronic control panel, this printed circuit board routes signals between control buttons and the dishwasher module. Integrated circuits process commands to start cycles and display settings through LED indicators. 

Causes of a bad module display PCB can include water damage into circuit paths, voltage fluctuations over time, or loose connections. Without a functioning interface, users are unable to select wash cycles or check cycle status.

Symptoms of a bad module display PCB include:

• Blank or unresponsive control panel 
• Inoperable buttons and dials
• Erratic lights and buzzers during cycles
• Diagnostic error codes shown

This LG OEM replacement restores dependable controls. Compatible also with Kenmore Elite dishwasher models, it provides a direct fit and easy restoration of washing functions. Proper installation protects future operations while maintaining convenience.

This DC motor assembly powers the appliance's drum or agitator, restoring proper rotation and performance. Replaces a worn or failed motor to help stop noise, weak spinning, or no-spin conditions caused by motor failure. What it does:

• Converts electrical power into rotational motion to drive the drum/agitator
• Restores normal spin and torque when the original motor is worn or failed
• Helps eliminate motor-related noises such as grinding, humming, or intermittent operation
• Works with the appliance's control system to respond to speed and direction commands

• Disconnect power and water before beginning any repair
• Follow the appliance service manual for disassembly, wiring, and alignment procedures
• Some installations require removing the cabinet, belts, or pulleys and using basic hand tools