Morxemmww01 Parts

This temperature sensor monitors the appliance's internal temperature and relays accurate readings to the control, helping maintain the set temperature. Replacing a failed sensor can resolve temperature-related errors and restore consistent, reliable heating performance.

• Senses cavity temperature and sends a signal to the control to regulate heat output
• Helps maintain target temperature during cooking cycles
• Common failure symptoms: inaccurate temperatures, won't reach or overshoots set temp, intermittent heating, or temperature-related error codes
• Can cause long heat-up times or premature shutdown when failing

• Disconnect power at the breaker/fuse and allow the unit to cool completely
• Access location varies by model; the sensor is typically mounted to the cavity wall or accessible from the rear panel
• Remove mounting screw(s), unplug the connector, and install the new sensor; transfer any bracket/seal if present
• Route leads clear of hot or moving parts and do not overtighten the mounting screw

The 12 Volt Halogen Bulb is an OEM replacement part for Samsung ranges and wall ovens. It is a specialized lighting component designed to illuminate the oven cavity, providing clear visibility and ensuring accurate monitoring of the cooking process.

Causes of a bad halogen bulb can include normal burnout over time, exposure to moisture, or damage due to impact. Electrical surges can also shorten the lifespan of the bulb.

Symptoms of a bad 12 Volt Halogen Bulb include:

• The light not turning on
• Flickering or dim light
• Intermittent lighting issues
• Blackened or broken bulb

This OEM Samsung part ensures compatibility and reliable performance for your appliance.

The Gas Grill High Limit Switch is an essential component for maintaining optimal performance in your Samsung gas grill. This genuine OEM part is designed to monitor and regulate the temperature, ensuring your grill operates safely by preventing overheating. With its reliable functionality, the high limit switch helps extend the lifespan of your gas grill by protecting critical components from excessive heat. This Gas Grill High Limit Switch is easy to install, allowing you to restore your grillGÇÖs performance without the need for professional assistance. Its compatibility with various Samsung gas grill models guarantees a perfect fit and seamless integration into your existing setup. By choosing this genuine OEM part, you ensure the highest quality and dependability, providing peace of mind during every grilling session. Replace your old or faulty high limit switch with this reliable component to enjoy consistent and safe cooking results on your Samsung gas grill.

The Riding Mower Halogen Light Transformer is essential for maintaining the lighting system of your rear-engine riding mower. This genuine OEM part ensures your mower's halogen lights receive consistent and reliable power, providing bright illumination for safer operation during early mornings or late evenings. Designed specifically for compatibility with a variety of rear-engine riding mower models, this transformer guarantees a secure fit and straightforward installation process. Using the Riding Mower Halogen Light Transformer means you can easily replace a faulty or damaged transformer, restoring the full functionality of your mowerGÇÖs lighting system. This not only enhances visibility but also contributes to the overall safety and efficiency of your mowing tasks. By choosing this genuine OEM part, you ensure the highest quality and durability, reflecting SamsungGÇÖs commitment to reliable performance. Keep your riding mower in top condition and enjoy a better mowing experience with this dependable halogen light transformer.

This convection element kit replaces the oven's convection heating element to restore even heat for baking and roasting. Use it when the convection system no longer produces consistent hot air or the oven bakes unevenly. What it does:

• Heats air for the oven's convection cooking mode so the fan can circulate consistent temperature.
• Restores even browning and predictable bake/roast results when the convection element has failed.
• Common symptom indicator: uneven baking or roasting, or visible damage to the element.
• Can be part of repairs when the oven does not reach expected results in convection mode.

• Disconnect power at the breaker before starting any repair — electric shock hazard.
• Access typically requires removing the oven cavity back panel or inner rear panel; use proper tools and follow OEM instructions.
• Inspect wiring terminals and insulation; replace connectors that are corroded or damaged.

This wafer head screw secures panels, brackets, and other components inside your appliance. Replacing worn or missing hardware restores a tight fit, reduces vibration and rattles, and keeps assemblies properly aligned for reliable performance.

• Fastens panels, brackets, or trim with a low-profile wafer head for even clamping
• Replaces stripped, corroded, or missing hardware (#8 x 3/8)
• Helps maintain alignment and reduce vibration or rattling noises
• Restores secure mounting for safe, stable operation

• Disconnect power; also shut off gas before servicing
• Support the panel or component while removing/installing hardware
• Hand-start threads to avoid cross-threading; tighten snugly without overtightening
• Replace screws one at a time to maintain alignment

This wafer-head Phillips screw (#8 x 3/8 in) is a factory fastener used to secure panels, brackets, and covers in compatible appliances. Replace a missing or damaged screw to restore a tight, properly aligned fit. What it does:

• Secures sheet-metal or plastic components to the appliance chassis or subassemblies
• Helps maintain proper alignment and reduce vibration or rattling
• Replaces lost, stripped, or corroded screws of the same size and type
• Used at panel, bracket, and cover mounting points designed for this fastener

• One wafer-head Phillips screw (#8 x 3/8 in)

• Disconnect power (and gas, if applicable) before servicing
• Start threads by hand to avoid cross-threading; use a #2 Phillips driver
• Do not overtighten, especially into plastic or thin sheet metal
• Replace only with the same size/type fastener removed to ensure proper fit

This convection oven motor drives the oven's convection fan to circulate hot air for even cooking. Designed as a direct replacement service motor to restore proper airflow and heating performance in compatible Samsung ovens. What it does:

• Spins the convection fan to circulate hot air for more even baking and roasting
• Helps maintain consistent oven temperature by improving air circulation
• Can address symptoms like uneven cooking, hot spots, or a noisy/non-spinning convection fan
• Matches OEM form and mounting for a straightforward replacement when compatible

• One convection oven service motor

• Disconnect power to the appliance before starting any repair
• Handle with care; verify connector and mounting orientation before final assembly
• Wear gloves and eye protection; avoid contact with sharp sheet metal and heating elements

The Electric Wall Oven Rubber Bumper is essential for maintaining the smooth operation of your Samsung electric wall oven. This genuine OEM part ensures a secure and quiet fit between the oven components, reducing vibrations and preventing wear over time. Crafted from durable materials, the rubber bumper effectively absorbs shocks, enhancing the longevity of your appliance. Installing this rubber bumper helps maintain the precise alignment of your oven door, ensuring it closes properly and operates efficiently. Designed specifically for Samsung electric wall ovens, this part guarantees a perfect fit and easy installation. By replacing a worn or damaged bumper with the Electric Wall Oven Rubber Bumper , you can restore your ovenGÇÖs functionality and enjoy a reliable cooking experience. Trust in this genuine OEM part to provide the quality and performance you expect from your Samsung appliance.

The Oven Rack Assembly is a reliable replacement part designed to restore the functionality of your Samsung oven. Crafted as a genuine OEM part, it ensures a perfect fit and seamless integration with your existing appliance. This assembly is constructed from high-quality materials, offering durability and resistance to high temperatures, which is essential for consistent cooking performance. The Oven Rack Assembly provides ample space for baking trays and dishes, enhancing your oven's capacity and convenience. Its easy installation process allows you to replace your old or damaged rack without professional assistance, saving you time and money. Compatible with a variety of Samsung oven models, this genuine OEM part guarantees compatibility and longevity. By choosing the Oven Rack Assembly , you ensure that your oven operates smoothly, helping you achieve delicious meals with ease.

The Electric Wall Oven Exhaust Grill is designed to replace the original exhaust grill of your Samsung electric wall oven, ensuring optimal ventilation and performance. This genuine OEM part guarantees a perfect fit and reliable functionality, maintaining the efficiency of your appliance. Crafted with quality materials, the exhaust grill effectively directs heat and steam away from the oven, contributing to a safer and more comfortable cooking environment. Installing this genuine OEM part is straightforward, allowing you to restore your ovenGÇÖs ventilation system quickly and easily. Compatible with a variety of Samsung electric wall oven models, this exhaust grill supports the longevity and smooth operation of your appliance. By choosing the Electric Wall Oven Exhaust Grill , you ensure that your oven continues to perform at its best, providing consistent results for all your cooking needs. Enhance your kitchen experience with this essential replacement part, designed to deliver both functionality and durability for your Samsung electric wall oven.