Parts for Ikea IX7DDEXDSM00: Shelf Parts

This front pan is the exterior face for the pantry/drawer area. It restores the drawer's appearance and helps the drawer seat properly for normal operation and food storage. What it does:

• Replaces a cracked, warped, or damaged pantry/drawer front that affects appearance
• Helps the drawer align and engage with the track for smooth opening and closing
• Restores a proper seal/fit at the front of the pantry area to reduce rattling and movement
• Prevents items from catching on a broken front when loading or unloading the drawer

• Designed for direct replacement; verify fit with your model before installing
• Remove power to the appliance and empty the drawer before starting
• Use care when removing trim clips or fasteners to avoid damage to adjacent parts
• If fasteners or mounting clips are damaged, replace them with OEM-specified hardware

This replacement support is a mounting bracket that helps secure and stabilize a major appliance assembly, restoring proper alignment and reducing vibration or movement. It fits into the OEM assembly to keep panels and components supported. What it does

• Holds and supports a panel or internal component to prevent sagging and misalignment
• Reduces rattling, vibration and contact-related noises caused by loose supports
• Restores proper alignment so doors, panels or assemblies sit and operate correctly
• Helps maintain safe, stable operation by keeping parts secured in their intended position

• Disconnect power and water (if applicable) before starting any repair
• Use basic hand tools; follow the OEM diagram for correct orientation and fastener locations
• Inspect adjoining parts (fasteners, clips, mounting points) and replace any that are worn

This crisper drawer roller guide mounts to the refrigerator shelf/frame and forms the track the drawer's roller rides in. Replacing a worn guide restores smooth, aligned drawer movement and helps prevent the crisper from sticking or coming off track.

• Guides and supports the crisper drawer roller to keep the drawer on its track
• Helps the drawer open and close smoothly and evenly
• Common symptoms of a failed guide: drawer sticks, tilts, wobbles, or pops off track
• Physical damage or wear to the guide can impede drawer travel

• Disconnect power and remove the crisper drawer and shelf/glass for access.
• Locate the damaged guide; release its locking tabs or remove the retaining screw(s).
• Align the new guide in the same orientation and secure it without overtightening.
• Reinstall the shelf and drawer; verify smooth drawer operation.

The Crisper Drawer is an OEM part for Whirlpool refrigerators. This drawer is designed to store fruits and vegetables, maintaining an optimal environment to keep them fresh for longer periods. It helps in organizing the refrigerator by providing a dedicated space for produce and ensuring proper humidity levels within the compartment.

Common causes of a bad crisper drawer include regular wear and tear, overloading with heavy items, or accidental impacts.

Symptoms of a bad crisper drawer include:

• Cracks or breaks in the plastic
• Difficulty sliding the drawer in and out
• Produce not staying fresh due to improper humidity
• The drawer not fitting securely in its slot

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Storage Drawer is an OEM replacement part for Whirlpool refrigerators. It provides customizable organization for items like snack foods, beverages, and condiments inside the refrigerator cabinet. The drawer measures approximately 27"x 20"x 6".

Causes of a bad storage drawer can include broken mounting slides, making it difficult to open or close securely. Overpacking may also cause cracks in the plastic construction over time.

Symptoms of a bad storage drawer include:

• Will not stay fully closed when loaded
• Mounting brackets crack or break off from vibration
• Contents spill out easily due to loose fit

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This glass crisper shelf provides a sturdy, flat surface for the refrigerator crisper area so fruits and vegetables are stored safely and organized. Replaces a cracked, chipped, or missing crisper shelf to restore usable storage space. What it does:

• Replaces the glass shelf that sits over the crisper drawer, supporting produce and other items
• Restores a smooth, even surface when the original shelf is cracked, chipped, or broken
• Helps prevent food from falling into the crisper compartment due to damaged glass
• Allows drawers and storage above the crisper to slide and sit properly when shelf is intact

• Handle with care; glass can break—wear gloves and eye protection during removal/installation
• Remove food and any loose components from the area before replacing the shelf
• Support the shelf while sliding it into position to avoid dropping or chipping
• Align it evenly and test drawer movement before restocking

This pan roller axle fits refrigerator drawers. It's the small support pin that anchors the roller so the crisper or pantry pan glides smoothly. Replacing a damaged axle restores proper glide and keeps the drawer tracking correctly.

• Secures the drawer's roller to the bin or rail so the pan slides smoothly
• Helps keep the crisper/pantry drawer level and properly aligned
• Common symptoms: drawer hard to open/close, sags on one side, scraping/clicking sounds
• Visible damage or a missing axle/roller at the drawer corner

• Unplug the refrigerator, remove contents, and take out the affected drawer
• Locate the broken axle and gently pry/pull it out
• Seat the new axle fully in the mounting hole; ensure the roller spins freely
• Reinstall the drawer and check for smooth operation

Replace a cracked or missing crisper bin with this refrigerator crisper pan. It restores smooth drawer operation and keeps fruits and vegetables contained under the crisper cover so they stay organized and easy to access.

• Holds produce in the fresh food compartment and slides on the crisper tracks
• Works with the crisper cover/humidity control to help manage moisture around produce
• Replaces drawers that are cracked, chipped, warped, or missing
• Helps resolve issues like drawers that won't slide smoothly, fall off track, or won't close fully

• Unplug the refrigerator or disconnect power; remove food from the drawer
• Fully extend the drawer, lift the front to clear the stops, and pull straight out to remove
• Align the new pan on the rails and slide in until seated; do not force
• Avoid overloading the bin to prevent future damage

This replacement plate is a small mounting component that secures or supports nearby parts and helps maintain proper alignment and clearance inside the appliance. It restores stable fit and prevents rubbing or movement of adjacent components. What it does

• Provides a firm mounting surface to secure fasteners or assemblies
• Keeps parts aligned to reduce wear and noise
• Helps maintain proper spacing and clearance for moving parts
• Addresses symptoms like loose trim, rattling, or misaligned components

• One replacement plate as shown

• Recommended for technicians or experienced DIYers; verify orientation before removing original
• Disconnect power to the appliance before starting work to avoid shock or injury
• Keep all fasteners and clips; reuse original hardware unless replacements are provided
• Tighten screws to snug only—avoid overtightening which can warp the plate or strip threads

This is a factory replacement plate used as a structural mounting/support piece within the appliance. Replacing a damaged or missing plate restores a secure, correctly aligned connection between parts and helps eliminate looseness or vibration.

• Provides a rigid surface to mount or support related components
• Maintains alignment and spacing within the assembly
• Helps prevent rattling, looseness, or shifting when secured properly
• Replace if bent, cracked, corroded, threads stripped, or missing

• Disconnect power (and shut off gas/water if applicable) before service
• Note hardware locations and orientation; take photos during disassembly
• Transfer any clips or fasteners from the original plate if reused
• Align and level the plate, then tighten fasteners to manufacturer guidance

The Crisper Drawer Support is an OEM part for Whirlpool bottom-mount refrigerators. It is a hidden component that provides structural reinforcement for crisper drawers located on the bottom shelf. 

Symptoms of a faulty crisper drawer support include:

• Drawers that do not fully close or aligned improperly 
• Excessive movement or noise when opening/closing drawers
• Visible sagging or warping of drawer bottoms over time

Causes can be normal wear under repetitive use or damage from overloading drawers with heavy items. This puts undue stress on support leading to failures.

This OEM replacement fits various Whirlpool, KitchenAid, and Kenmore bottom-mount refrigerator models.

A small replacement screw used to secure appliance components and panels. This genuine-style fastener restores proper fit and function when original screws are missing, loose, or damaged. What it does:

• Secures panels, brackets, or small components in place
• Restores proper alignment and prevents rattling or movement
• Replaces stripped, corroded, or lost fasteners
• Works where the appliance design calls for this specific screw size and thread

• Use the matching driver size and apply firm, even pressure to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic parts
• Disconnect power or move appliance away from utilities when working near electrical or gas components
• Inspect and repair the threaded hole before installing the new screw

This front crisper drawer support secures the refrigerator's front crisper drawer for smooth sliding and correct alignment, reducing sagging and sticking so stored items stay accessible and the drawer operates reliably. What it does:

• Holds the front corner of the crisper drawer in place so the drawer slides and aligns properly.
• Prevents drawer sagging, catching, or uneven movement that can make the drawer hard to open or close.
• Helps maintain proper drawer positioning to protect stored produce and prevent rubbing on the cabinet.
• Works with the existing drawer track and rear support.

• Unplug the appliance or disconnect power before starting any service to reduce electrical risk.
• Empty and remove the crisper drawer before replacing the support; follow the refrigerator's parts diagram for correct orientation.
• Inspect the drawer track and rear support for wear; replace any damaged components to restore smooth operation.

A small mounting screw used to secure appliance panels and components. This genuine replacement restores proper fit and reduces vibration or loose parts when a missing or stripped fastener causes fit issues. What it does:

• Secures panels, trim, or internal components to the appliance frame
• Helps stop rattling or movement caused by a missing or loose screw
• Restores correct alignment where a fastener is lost or damaged
• Works as a direct-fit replacement when the original screw is worn or stripped

• The screw shown/listed

• Disconnect power (and gas if applicable) before any repair
• Use the matching screwdriver or driver bit to avoid stripping the head
• Thread carefully and avoid overtightening to prevent damage
• Keep small parts away from children and store removed hardware for reference