Parts for Whirlpool WRV996FDEE02: 08 - Shelf Parts

This replacement crisper pan restores the storage surface in your refrigerator's fresh-food compartment so fruits and vegetables sit securely and the drawer area stays clean. It fits into the crisper area and supports produce. What it does:

• Provides a stable, flat pan for storing fruits and vegetables
• Replaces cracked, warped or damaged pans that let items sag or shift
• Helps contain spills and keeps the crisper drawer area cleaner
• Works with the refrigerator's crisper drawer assembly to support proper storage

• Remove all food from the drawer area before installing
• Slide the new pan into the crisper opening until it seats; avoid forcing it
• Handle carefully — if glass, place on a padded surface to prevent breakage

The Crisper Drawer Frame is an OEM part for Whirlpool refrigerators. This part supports and contains the crisper drawers where fruits and vegetables are stored. This frame includes tracks or guides to allow the drawers to slide in and out smoothly, as well as sometimes providing structural support for the shelves above it. 

Causes of a bad Crisper Drawer Frame can range from overloading the drawers with too much weight, accidental damage during cleaning, or general wear and tear over time. 

Symptoms of a bad Crisper Drawer Frame include:

• Cracks or breaks in the frame, leading to instability or difficulty in sliding the drawers.
• Warping or damage, preventing proper alignment within the refrigerator.
• Broken tracks or guides, making drawer movement stiff or uneven.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This drum support roller replaces a worn or noisy dryer roller that helps the drum turn smoothly. Restores quiet, even drum rotation for improved drying performance and reduced wear on the drive system. What it does:

• Supports the dryer drum so it spins evenly during operation
• Reduces vibration and noise caused by worn or seized rollers
• Helps prevent premature wear on the belt and drive components
• Common symptom: loud rumbling, squeaking, or visible drum wobble during spin

• Disconnect power to the appliance before any service
• Replace worn or damaged rollers in matched pairs when recommended by the OEM
• Inspect the shaft, bearing surface, and belt for wear and replace if needed

Note: This part is one screw, order quantity needed.

This small mounting retainer clip secures panels, hoses, or wiring to appliance chassis to prevent vibration and movement. It helps restore proper routing and reduces rattles or chafing from loose components. What it does

• Holds trim, panels, hoses, or wiring in place to prevent rubbing and noise
• Restores correct component alignment after repair or maintenance
• Helps reduce vibration-related rattling and wear
• Simple replacement for a broken, bent, or missing clip

• One mounting retainer clip

• Turn off and unplug the appliance before inspecting or replacing clips
• Remove only the minimal surrounding parts needed for safe access
• Clip may require gentle pressure to seat; avoid forcing or prying on nearby plastic
• Replace all matching fasteners for secure fit

This replacement divider restores simple organization inside the refrigerator by separating items on a shelf or bin to reduce shifting and spills. It replaces a cracked, broken or missing factory divider and helps keep stored items upright. What it does:

• Creates separate zones on a shelf or bin to keep bottles, jars and small items from sliding together
• Helps prevent items from tipping or falling when the door or drawers are moved
• Replaces worn, broken or missing dividers to restore proper fit and stability
• Works with the fridge's existing slots or tracks for a secure hold

• Typically installs by snapping into existing slots or sliding into the shelf/bin track; no special tools are usually required
• Remove food and the affected shelf or drawer for easier access and to avoid mess
• Do not force the part into place; inspect mounting clips or tracks and replace any damaged hardware
• If working near electrical components or lights, unplug the appliance or switch power off before starting

The Door Switch is an OEM part for Whirlpool refrigerators. This switch plays a crucial role in monitoring the status of the refrigerator door. It detects when the door is open and closed and signals the refrigerator to suspend or resume cooling operations accordingly. 

Causes of a bad door switch can include general wear and tear over time, exposure to moisture, or impact damage. Please check for proper connection and that the wires are intact before replacing the switch.

Symptoms of a bad door switch include: 

• The refrigerator fails to resume cooling after closing the door
• The inside light fails to turn on when the door is opened
• Abnormal energy usage due to improper door monitoring

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Door Switch Assembly is an OEM replacement part for Whirlpool refrigerators. It is responsible for turning the light on when you open the refrigerator door and turning it off when the door is closed. It ensures that the light functions properly, allowing you to easily locate and retrieve items from your refrigerator.

Symptoms of a faulty door light switch include:

• Interior light not turning on when the door is opened
• Interior light staying on even when the door is closed

A bad door light switch can occur due to regular use, wear and tear, or accidental damage. If you notice issues such as the interior light not turning on or off when you open or close the door, it may be time to replace the door light switch.

This Whirlpool replacement part is also compatible with Sears/Kenmore models.
 

This drum support roller replaces a worn or noisy dryer roller that helps the drum turn smoothly. Restores quiet, even drum rotation for improved drying performance and reduced wear on the drive system. What it does:

• Supports the dryer drum so it spins evenly during operation
• Reduces vibration and noise caused by worn or seized rollers
• Helps prevent premature wear on the belt and drive components
• Common symptom: loud rumbling, squeaking, or visible drum wobble during spin

• Disconnect power to the appliance before any service
• Replace worn or damaged rollers in matched pairs when recommended by the OEM
• Inspect the shaft, bearing surface, and belt for wear and replace if needed

The Thermistor is an OEM part for Whirlpool refrigerators. As a temperature-sensitive sensor, it tracks compartment climates to maintain fresh food safety.

Causes of a bad thermistor involve cracking of its insulated body allowing moisture, as well as typical wear disrupting conductivity after years of use. 

Symptoms include: 

• Fluctuating temperatures conducive to bacterial growth  
• Constant compressor operation without reaching targets
• Error codes or inability to adjust temperature settings

This OEM Whirlpool part is also compatible with some Kenmore, Maytag, and KitchenAid models.

The Glass Shelf is an OEM part for Whirlpool refrigerators. This shelf provides a stable and durable surface for storing food items within the refrigerator, helping to keep the interior organized and allowing easy access to stored items.

Causes of a bad glass shelf can include accidental impacts, overloading with heavy items, or thermal stress from placing hot containers directly on the glass.

Symptoms of a bad glass shelf include:

• Visible cracks or chips in the glass
• The shelf not fitting securely in place
• Difficulty in removing or adjusting the shelf
• Items not being properly supported, leading to instability

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement bin provides a durable storage drawer for organizing foods and small items inside the appliance. It restores a secure, easy-to-access storage area so you can keep fresh and frozen items neatly contained. What it does

• Serves as a removable storage drawer for organizing and containing food items
• Replaces cracked, chipped, or broken bins that no longer hold contents securely
• Helps keep items accessible and prevents spills inside the compartment
• Fits into the designated slide or support track to glide in and out for access

• One replacement bin as pictured

• Remove all contents from the compartment and power off the appliance before service
• Slide the old bin out along its tracks and lift or unclip per the appliance design; install the new bin by reversing removal steps
• Avoid forcing the bin into place; ensure it seats on its supports or tracks to prevent damage
• If any mounting clips or rails are damaged, replace them before installing the new bin

The Door Handle Mounting Screw is an OEM part for Whirlpool refrigerators. It secures the door handle to the refrigerator door.

Causes of a bad door handle mounting screw can include wear and tear over time, improper installation, or excessive force applied to the handle. These factors can result in a loose or wobbly handle, compromising the functionality and aesthetics of your refrigerator.

Symptoms of a bad door handle mounting screw may include:

• A loose or unstable handle
• Difficulty in opening or closing the refrigerator door
• The handle becoming detached

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The LED Light Module Kit is an OEM part compatible with Whirlpool refrigerators and freezers. The kit contains 12 LED lights to replace all LEDs within the refrigerator. Within the interior cavity, this module evenly illuminates the compartment to visually check contents. LED technology provides a cool, energy-efficient light source. 

Causes of a bad light module can include failure of individual LED bulbs over time, wires detaching from the circuit board, or damage from moisture intrusion. 

Symptoms of a bad LED light module include:

• Dim, flickering, or completely non-functional lighting
• Hot spots or sections of the module not illuminating  
• Audible buzzing or humming from internal electronics

This replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Pantry Drawer Wiring Harness is an OEM part for Whirlpool refrigerators. This wiring harness connects the electrical components of the pantry drawer, ensuring proper functionality and temperature control within the drawer. It helps maintain the correct temperature settings and allows for the smooth operation of the pantry drawer features.

Causes of a bad wiring harness can include wear and tear from regular use, damage from accidental pinching or pulling, or electrical faults that disrupt the connection.

Symptoms of a bad pantry drawer wiring harness include:

• Pantry drawer not maintaining the correct temperature
• Inconsistent or fluctuating temperatures within the drawer
• Pantry drawer features not working
• Error codes related to the pantry drawer

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This support secures a mating part inside the appliance, keeping it properly positioned and stable during operation. Replacing a cracked or missing support restores correct fitment and helps prevent looseness, vibration, and related performance issues.

• Holds the associated shelf/panel/assembly in place
• Maintains alignment to reduce movement and rattling
• Replaces broken, warped, or missing support hardware
• Common symptoms: loose or sagging component, rattling noises, difficulty keeping the part seated, visible cracks or broken tabs

• Disconnect power; shut off water before servicing
• Note the original orientation and mounting points before removal
• Transfer and reuse existing screws/clips as required; seat the new support fully and tighten fasteners carefully to avoid damage
• The supported component sits level and secure before restoring power