Parts for Frigidaire FRTD2021AS0: Shelves Parts

Wire freezer shelf

The LED Light Bulb is an OEM part for Frigidaire refrigerators. It provides illumination inside the refrigerator and freezer compartments, making it easier to see and organize food items. This energy-efficient LED bulb ensures bright, long-lasting light with minimal energy consumption.

Causes of a bad LED light bulb can include electrical issues such as power surges, wear and tear over time, or damage due to impact or moisture exposure.

Symptoms of a bad LED Light Bulb include:

• The light not turning on
• Flickering or dim light
• Intermittent lighting issues
• Discoloration or reduced brightness

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement light socket secures the refrigerator/freezer lamp and provides the electrical connection needed for the interior light to operate. It restores a reliable bulb connection so the interior light turns on when the door opens. What it does:

• Holds and connects the interior lamp/bulb to the appliance wiring
• Replaces a cracked, corroded, or loose socket that causes intermittent or no light
• Helps eliminate flickering, a loose bulb, or a socket that won't accept a bulb
• Works with compatible appliance wiring and standard appliance light bulbs

• One light socket

• Disconnect power to the appliance before servicing to avoid shock
• Remove the old socket and unplug or disconnect wires, then attach the replacement per OEM wiring orientation
• Inspect bulb and wiring; replace the bulb if damaged and secure wiring connectors

This replacement housing restores the appliance's outer cabinet support and protects internal components from dirt and wear. It returns a damaged or cracked cabinet area to proper, secure condition. What it does

• Replaces a cracked, warped, or broken outer cabinet housing that exposes internal components
• Restores mounting points and alignment for panels, controls, or accessories
• Stops rattling or vibration caused by loose or damaged housing
• Protects electrical and mechanical parts from debris and moisture

• One outer cabinet housing

• Disconnect power before starting any repair to avoid shock or injury
• Handle edges carefully; use gloves to avoid cuts on metal parts
• Basic hand tools typically required; follow model-specific disassembly steps
• If mounting hardware or clips are missing, inspect and replace as needed

This shield is a small protective trim piece that helps cover and protect nearby components from heat, moisture, and debris. Replacing a damaged or missing shield helps maintain safe, reliable appliance operation. What it does:

• Protects wiring, insulation, and nearby components from heat, moisture, and debris
• Prevents rubbing or chafing that can lead to damaged wires or premature wear
• Helps keep components properly routed and secured to reduce noise or vibration
• Common symptom: visible crack, bent or missing shield, or nearby component wear

• One shield

• Replace only with the exact part designed for your model; your model's parts diagram
• Disconnect power to the appliance before beginning any repairs
• Handle sharp edges carefully and use recommended fasteners; do not overtighten
• If routing or connector clips are damaged, inspect surrounding parts and replace as needed

This cold control thermostat regulates cabinet temperature by sensing air and cycling the cooling system. Replacing a worn control restores stable, predictable cooling performance and prevents food from getting too warm or freezing.

• Senses compartment temperature via a capillary bulb and opens/closes electrical contacts
• Starts and stops the compressor to maintain the set temperature range
• Helps ensure consistent cooling across the cabinet
• Common failure symptoms: too warm or too cold temperatures, short cycling, runs constantly, or won't start unless the knob is adjusted

• Disconnect power before servicing; work with dry hands and tools
• Note wire locations and transfer any brackets or insulators from the original part
• Route and secure the capillary sensing bulb exactly as the original; do not kink or sharply bend it
• After reassembly, set the dial to mid-range and allow up to 24 hours for temperatures to stabilize

The Defrost Timer is an OEM part for Frigidaire refrigerators. It regulates the automatic defrost cycle of the freezer, preventing the buildup of frost and ice on the evaporator coils.

A bad defrost timer can be caused by electrical issues, component failure, or malfunctioning mechanisms. When the timer becomes faulty, it can result in issues such as excessive frost buildup, poor cooling performance, or a constantly running compressor.

Symptoms of a bad defrost timer include:

• Frost or ice accumulation in the freezer
• Inadequate cooling in the refrigerator 
• Constantly running compressor 

Replace your faulty defrost timer with this genuine OEM Frigidaire part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This is a replacement glass shelf for refrigerators that restores stable, visible storage and keeps items organized. It provides a flat, easy-to-clean surface so food and containers sit securely without sliding. What it does

• Replaces a cracked, chipped, or missing refrigerator shelf so you can safely store items.
• Restores stable, level shelving to prevent spills and improve organization.
• Provides a clear, easy-to-see surface for keeping food visible and accessible.
• Compatible with factory frame/supports to fit into existing shelf tracks.

• One glass refrigerator shelf

• Remove all food and containers before installing; lift shelf into the existing tracks or brackets.
• Handle glass carefully and wear gloves to avoid cuts during installation.
• If shelf uses trim or clips, inspect supports for damage and replace any broken hardware before installing.

This refrigerator shelf restores a safe, level storage surface inside your appliance. Replace a cracked, bent, or missing shelf to regain usable space, keep food organized, and reduce the risk of spills or items tipping. What it does:

• Provides a sturdy, level surface for storing food and containers inside the appliance
• Mounts into the factory shelf rails or support tabs
• Replace when cracked, broken, warped, or missing
• Helps resolve issues where a shelf won't sit level or keeps falling

• 1 shelf

• Disconnect power and wear gloves if handling broken components
• Remove food items, then lift/slide the old shelf out of the side rails
• Align the new shelf with the rails/supports and insert fully until seated level
• Reload items evenly to avoid overstressing the shelf

The Crisper Pan Cover is an OEM part for Frigidaire refrigerators. It serves as the shelf that sits above the crisper drawers and supports various items while providing a lid to help maintain the humidity levels necessary to keep fruits and vegetables fresh longer. This cover typically is only the frame and does not include the glass.

Symptoms of a bad Crisper Pan Cover include:

• Cracks or damage to the cover that can compromise its structural integrity
• Warping or bending that affects the fit and function
• Difficulty sliding or fitting the cover properly over the crisper drawers

Causes of a bad crisper pan cover can include overloading the shelf with too much weight, impacts from dropping heavy items, or thermal stress from fluctuations in refrigerator temperatures.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Crisper Pan is an OEM part for Frigidaire refrigerators. The crisper pan measures approximately 19" x 7 1/2" x 11 1/2" It is responsible for lining the bottom of the refrigerator's vegetable and fruit crisper drawers, where perishable items like produce are stored. The crisper pan helps extend the shelf life of fruits and vegetables.

Causes of a bad crisper pan can include heavy impact from dropping, regular wear and tear, or exposure to harsh cleaning chemicals.

Symptoms of a bad crisper pan include:

• Cracks or splits in the plastic
• Difficulty sliding the pan in and out of its compartment
• Food not staying as fresh due to improper humidity levels
• Accumulation of dirt and stains that are hard to clean

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement refrigerator drawer restores a damaged or missing fresh-food storage bin so food is held securely and organized. Durable molded construction replaces cracked or broken drawers to keep produce and deli items supported. What it does

• Provides a sturdy bin for storing fruits, vegetables and deli items in the fresh-food section
• Slides into existing cabinet tracks or supports to restore normal drawer operation
• Replaces drawers that are cracked, warped, or no longer holding contents securely
• Helps keep interior organized and prevents items from shifting or spilling

• Remove all food and empty the compartment before installing
• Slide into existing rails or supports; confirm correct orientation before seating
• Handle edges carefully to avoid pinching; wear gloves if needed
• Use only with compatible refrigerator models and mounting hardware

This carriage is the factory support piece that holds and guides the related assembly so it moves smoothly and stays properly aligned. Replacing a worn or broken carriage helps restore solid, reliable operation. What it does:

• Supports and guides the connected assembly for smooth, consistent movement
• Keeps components aligned to prevent binding, wobbling, or sagging
• Restores proper operation when the original is cracked, worn, or deformed
• Typical symptoms include sticking, uneven travel, or misalignment

• 1 carriage

• Disconnect electrical power before servicing; allow any hot surfaces to cool
• Wear cut-resistant gloves to protect hands from sharp edges
• Transfer any screws, clips, or brackets from the old carriage to the new one
• Confirm smooth movement and proper alignment before full reassembly

The Pan Cover Glass Insert is an OEM part for Frigidaire refrigerators. It acts as the shelf above the crisper drawers, providing a stable and transparent surface for storing fruits, vegetables, and other perishables. This glass insert is crucial for maintaining the organization within the fridge, allowing for easy visibility and access to items stored in the crisper drawers beneath it. 

Causes of damage to the Pan Cover Glass Insert can include overloading it with too heavy items, accidental impacts during the loading or unloading of groceries, or sudden temperature changes that can cause glass to weaken or crack.

Symptoms indicating the need for a replacement include:

• Visible cracks or chips in the glass
• Scratches that impair visibility
• Shattering of the glass insert

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This factory fastener secures appliance panels and components. Replace a missing, stripped, or corroded screw to restore a tight, rattle-free fit and keep brackets and covers properly aligned.

• Fastens panels, brackets, and internal parts as specified by the manufacturer
• Helps maintain alignment and reduces vibration/rattling
• Replace if the head is stripped, threads are damaged, or corrosion is present
• Symptoms include loose/missing hardware, gaps, or rattling during operation

• Disconnect power; shut off gas/water if applicable before servicing
• Use the correct driver/bit size to avoid stripping the head
• Start threads by hand to prevent cross-threading; do not overtighten
• Match screw length/thread to the location; replace in sets when required

This wiring harness routes electrical power and signals between appliance components to restore reliable operation. Replacing a damaged harness prevents intermittent faults and helps restore controls, lights, and other affected functions. What it does:

• Provides secure electrical connections between control board, switches, and components
• Replaces frayed, burnt, or broken wires that can cause intermittent operation or failure
• Restores continuity to restore non-working controls, lights, or powered features
• Helps prevent shorts and arcing that can lead to further component damage

• Disconnect all power to the appliance before beginning any work
• Inspect connector ends and wire insulation; replace if insulation is damaged beyond repair
• Route harness away from sharp edges and heat sources; secure with existing clips or ties

This refrigerator shelf spacer positions and supports a shelf so it sits secure and level. Replacing a worn or missing spacer helps eliminate wobble or shifting and restores proper fit and alignment inside the compartment. What it does

• Maintains correct spacing and alignment for the shelf
• Helps keep the shelf level and secure in its track or frame
• Replaces cracked, deformed, or missing spacers
• Symptoms can include a loose, tilted, or rattling shelf, or visible gaps where the shelf should seat

• One shelf spacer

• Disconnect power to the refrigerator before servicing
• Remove the shelf to access the spacer location
• Gently pry out the old spacer; avoid stressing plastic or glass components
• Press the new spacer firmly into place and reinstall the shelf, ensuring proper orientation