Parts for Poulan 967061401: Side Cover & Clutch Parts

This part is a replacement screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a defective or misplaced screw in a variety of lawn equipment. This screw is a high-quality piece of standard hardware with multiple different uses. Screws are essential for securing parts of the equipment, but can easily become lost, stripped, or otherwise damaged. If screws are missing, it can affect the functionality of the equipment. A Phillips head or flat head screwdriver can be used to install this screw. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this screw is suitable for use on several models of lawn equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This rear handle cover is a genuine Husqvarna part, sold individually. This rear handle cover can be used as a replacement part in a chainsaw.The rear handle cover might have to be replaced if it is damaged to the point that the cover falls off or if the rear handle cover is damaged itself. This could occur if the rear handle cover wears away over time or comes into close contact with a hard object that warps or dents the component beyond functionality. If this occurs, the rear handle cover should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This rear handle cover is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This is a rear handle that can be used on a variety of chainsaws made by major manufacturers. If the handle is broken, lost, or no longer works as expected, it should be replaced. There will be no way to hold onto the chainsaw without it.Visually inspect the rear handle for any damage to determine whether the part needs to be replaced. Check for excessive scratches, cracks, or broken areas that make the chainsaw difficult or impossible to use. Use work gloves while making the replacement and make sure to disconnect the spark plug wire before working. The part will require only basic tools to replace and ensure a working chainsaw. Remove the broken handle and replace it with a quality replacement component. Make sure to reattach the spark plug wire before using the tool again.This rear handle is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The handle is made for use with Craftsman and Poulan chainsaws.

This replacement part is a screw and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Screws are an important part of many different types of machinery as they hold other parts in place and secure. A new screw might be needed if the current ones are loose or missing. It is common that screws might become stripped overtime and will need to be replaced. Be sure to double check the size of the screw as many places on lawn equipment will require different size screws. Be sure the appliance is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This part is a replacement clip socket wrench. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective, lost, or broken clip socket wrench in chainsaws.This clip socket wrench helps to secure components of the chainsaw together properly while also being easily removable when necessary. This part can easily become lost, corroded, or otherwise defective over time and thus may require replacement. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular clip socket wrench, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This clip socket wrench can be used with a variety of chainsaw models manufactured by Husqvarna, Poulan, and other brands.

This is a thrust washer that can work as a replacement for several models of chainsaws. Thrust washers are flat washers that will help to provide a tight fit between the connected pieces. The washer can help to reduce the amount of vibration, and it will keep the different parts from touching one another, which could cause wear. Check the washers when servicing the chainsaw to see if they might need to be replaced.The washers are durable and can last for a long time. However, there is the risk they could become lost when working on the machine, or that they could corrode or wear down. Replacing the washer is easy and should not take long to do.This thrust washer can be used to replace washers in certain models of chainsaws from Craftsman, Husqvarna, and Poulan. The washer is sold individually, so owners might want to buy several to have them available. This is a genuine OEM replacement part that has been sourced from the manufacturer.

The clutch drum assembly is an important part of the chainsaw. When the clutch has been engaged, the assembly will turn and move the chain around the bar. Without this assembly, the chain would not move, and the chainsaw would not be usable. It is important for chainsaw owners to check the performance of their clutch and clutch assembly regularly to look for signs of wear and tear or issues with the performance. Often, the clutches will continue to work past the point when they should be replaced. It is safe and wiser to replace the clutch assembly as soon as any issues are noticed. Replacement of the clutch assembly will require a set of wrenches. Start by removing the chain brake, the bar, and the chain. Remove the cover and the sparkplug. Bind the piston to remove the clutch without having it spin. Remove the clutch and add the new assembly. Seat the clutch, unbind the piston, and then secure the bar, chain, and the chain brake. Tension the chain and then test out the new clutch. This is a genuine OEM part sourced from the manufacturer. It will work with many models of chainsaws from Husqvarna, Poulan, and Craftsman.

A clutch on a chainsaw is what enables the engine to turn a low RPM without the chain moving. It is a crucial component for operating the device safely. Without it, the blade or chain spins continually and leaves operators at risk for harm or injury. The clutch on any chainsaw works automatically and does not have a control or trigger to activate it. If your chainsaw is not automatically idling without halting the chain spinning, it could be time for a new clutch assembly. It requires only a screwdriver to do the repair This is a full replacement clutch assembly for chainsaws made by Husqvarna, Poulan, Craftsman, and several other brands. This OEM part is complete and features the clutch shoes and spring. It is an individual component and is not shipped with other hardware..

This part is a handguard spring for a chainsaw. The handguard spring returns the handguard to the forward position when the handguard is released.A new handguard spring may be needed if the handguard no longer returns to the forward position when the handguard is released. If the spring is broken in any way, it will no longer work properly and will need to be replaced. The spring could become damaged or break after normal use due to normal wear and tear over time. If this is the case, it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This handguard spring is a genuine Husqvarna part. It is sold individually. This particular handguard spring is compatible with chainsaws that are manufactured by the Husqvarna brand and the Craftsman brand.

This replacement part is a cylinder spring assembly and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This spring is used in chainsaws and it is intended to help the engine run to its full capacity. A new cylinder spring assembly might be needed if the current one is damaged or missing. If there are unusual noises coming from the inside of the appliance, it might be due to the spring assembly. It is recommended that the user wear work gloves while replacing this part. This cylinder spring assembly is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer for long lasting use. Refer to the owner's manual for more specific instructions.

This screw is designed to be used in many different chainsaws to connect and hold together various components. The screw can be used on its own or placed with a nut in a pre-drilled and threaded hole. If a nut is going to be used, it is best to choose one with the same threading and finish as the screw that will be used. A screw can become damaged in many ways that will require a replacement. Corrosion, excessive stress, or high temperatures may weaken the screw. In some cases, the damage can cause it to break or become loose and no longer properly secure other components of the chainsaw. A visual inspection can help determine if corrosion is present or the screw is damaged or broken. If the screw is stripped, a bolt remover may be needed to remove it to make the replacement.This screw is a genuine OEM replacement part provided directly from the manufacturer. It is sold as an individual component. The screw is compatible with chainsaws created by Poulan, Poulan Pro, Craftsman, and Husqvarna. A screwdriver is needed to replace, remove, or install the replacement part.

This is a replacement for the front handle of a chainsaw. A quality chainsaw handle is essential for those who are using these machines. They provide a place for the user to grip and to ensure they have a good hold of the chainsaw when it is in use. If the handle has an issue or has broken, it will need to be replaced before the owner uses the chainsaw again. It is not safe to operate the chainsaw if there is a problem with the handle.The handles are made from durable material, but there is still a potential for them to wear down or break over time or due to accidents. Replacing the chainsaw handle is relatively easy and should not take more than 15 to 20 minutes. Owners will want to be sure the chainsaw is cool and may want to remove the chain before getting started.The chainsaw front handle replacement will work for certain models of chainsaws from Husqvarna, Craftsman, and Poulan. The handle is sold individually. It is a genuine OEM replacement part sourced from the manufacturer.

This is a starter hub replacement designed for use in select models of lawn and garden equipment. The starter hub is part of the starter system. The starter pulley will engage the hub, which will then engage the flywheel to start the motor. The hub is subject to constant repetitive motion and rotation, so it can often become worn or damaged over time. Without a functional starter hub, the engine will not be able to operate safely, which is why an OEM replacement is essential.It is important to wear gloves when performing engine repairs. In order to replace the starter hub, the old part will need to be removed from the starter assembly. Then, the new hub can be put in place and connected to the flywheel and the starter pulley. Be sure to disconnect the power supply before performing any engine repairs.This genuine OEM starter hub that is manufactured by Poulan. It is designed for use with select models of chainsaws. The hub is sold as an individual replacement part. There is no hardware included and other parts will require an additional purchase.

This genuine OEM hub spring is designed to fit select models of chainsaws. The hub spring is responsible for providing the spring action that reacts to the pull starter. This generates the power that rotates the flywheel and helps engage the engine in the starting process. The spring becomes worn and extended with regular use. Since it is metal, it may also be subject to corrosion or other environmental damages. In either case, the hub spring should always be replaced promptly if it is found to be defective or damaged in any way. This genuine hub spring can be used for a variety of chainsaws from Poulan, Husqvarna, AYP, Sears/Craftsman, Roper, Poulan Pro, and Weed Eater. This item is sold as an individual unit. Springs are under pressure and can be dangerous to replace so always use caution. Allow the engine to cool before beginning repairs and always wear gloves for any kind of engine part repairs or replacements.

When you pull the starter rope, it will engage the chainsaw starter pulley, which then makes the flywheel engage and causes the engine to fire up. The assembly consists of a few small working parts that can wear out or become damaged or lost over time. The included spring may wear or you may lose one of the screws that secure it in place. This OEM kit makes it easy to replace the entire assembly with an exact fit for compatible models. When installing this starter pulley kit, remove or disconnect the spark plug for your safety. This genuine OEM chainsaw starter pulley kit is designed for use with a variety of chainsaws that are manufactured by brands like Husqvarna, Craftsman, and Poulan. Check your user manual to confirm part number compatibility for an exact fit. This starter pulley kit is sold individually and comes with everything that you need for a quick and easy replacement.

This part is a recoil starter hub spring that is used on chainsaws. The recoil starter hub spring connects the starter hub and pulley and applies tension to the pulley.A new recoil starter hub spring may be needed if there is no longer tension. If any component of the retail starter hub spring is cracked, broken, or damaged, it will need to be replaced. The recoil starter hub spring may become worn out over time. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This recoil starter hub spring is a genuine Husqvarna part. It is sold individually. This particular recoil starter hub spring is compatible with chainsaws that are manufactured by the Husqvarna brand and the Poulan brand.